Howto:Nista-IP39-4x - Nista Devices GmbH - Testreport

From innovaphone wiki
Jump to navigation Jump to search

Summary

The Nista-IP39-4x IP Door Phone supports all required innovaphone features and is therefore qualified as recommended product.

The tests were made by the partner Kontel from Poland. Any questions related to this test should be made to the partner Kontel.

Certification Status

The tests for this product have been completed.

Testing of this product has been finalized September 28th, 2015.

Version

Nista Software Version:

  • ow2abw

innovaphone Firmware:

  • V11r2 SR3

Test Setup

Device Setup

Tested feature Result
Register Device w/o specific configuration (requires DHCP) Yes
DHCP is default No
DHCP yields timeserver and time displays correctly Yes
SNTP config has TZ string for timezone/dst autoconfig Yes
DHCP yields correct default gateway Yes
Device supports magic registration (e.g. by serial) N/A
Fixed registrations works Yes
Device registers w/o Extension (just by name) No
Device registers by name with non-latin1 characters (e.g. UserÄÖÜ) No
Device registers by extension Yes
Device registers with password Yes
Device registers multiple identities N/A
2nd GK is supported N/A
Device supports Redirection of Registration (Master redirects to Slave) No
Device supports STUN protocol Yes
Device sends NAT - keepalive messages Yes
Device refreshes the PBX registration Yes
Device supports SIP over TCP No.
Device supports SRTP Yes
Device supports SIPS (SIP over TLS) No
Device supports HTTPS Yes
Device supports VAD (Voice activity detection) No
Device supports Auto-Answer (needed when used with CTI client) Yes

Test Results

Basic Call

Tested feature Result with MR
call using g711a Yes
call using g711u Yes
call using g729 Yes
call using g722 Yes
Overlapped sending No
Device sets up an early media channel for incoming calls No
Device sets up an early media channel for outgoing calls No
Device shows called id number Yes
Device shows called id name Yes
Device shows called id display info Yes
Fax using T.38 N/A
CGPN can be suppressed Yes
Reverse Media Negotiation Yes
Device shows CDPN/CGPN on incoming call Yes
Device shows CDPN/CGPN on outgoing call Yes
Device shows connected number Yes
Device shows diverting number Yes - No answer called divert
Device supports distinctive ringing N/A
Device supports asymetric codec negotiation N/A
Device supports codec renegotiation during a conversation Yes
Device shows correct display message in case of busy CDPN N/A
Device shows correct display message in case of not existing CDPN N/A
Device shows correct display message in case that the call is declined N/A
3party conference possible No
Device supports display updates during call(needed for Directory Search object) Yes
Long Time Call (>30 min) works? Yes
Voice Quality OK? Yes

DTMF

Tested feature Result
DTMF tones sent correctly Yes, (Sip Info,RFC 2833)
DTMF tones received correctly Yes, (Sip Info,RFC 2833)

Hold/Retrieve

Tested feature Result
Device handles incoming hold correctly N/A
Device can put a call on hold using correctly(inactive or sendonly) N/A

Transfer with consultation

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes Yes
inno1 calls inno2. inno1 transfers to testphone. Yes Yes
inno1 calls testphone. inno1 transfers to inno2. Yes Yes
inno1 calls testphone. testphone transfers to inno2. N/A N/A
testphone calls inno1. inno1 transfers to inno2. Yes Yes
testphone calls inno1. testphone transfers to inno2. N/A N/A

Transfer without consultation (alerting only)

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes Yes
inno1 calls inno2. inno1 transfers to testphone. Yes Yes
inno1 calls testphone. inno1 transfers to inno2. Yes Yes
inno1 calls testphone. testphone transfers to inno2. N/A N/A
testphone calls inno1. inno1 transfers to inno2. Yes Yes
testphone calls inno1. testphone transfers to inno2. N/A N/A

Blind Transfer

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes
inno1 calls inno2. inno1 transfers to testphone. Yes
inno1 calls testphone. inno1 transfers to inno2. Yes
inno1 calls testphone. testphone transfers to inno2. N/A
testphone calls inno1. inno1 transfers to inno2. Yes
testphone calls inno1. testphone transfers to inno2. N/A

Blind Transfer (alerting only)

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes
inno1 calls testphone. testphone transfers to inno2. N/A
testphone calls inno1. inno1 transfers to inno2. Yes


Other Features

Keys

Tested feature Result
Device has speed dial keys Yes
Device has programmable function keys N/A
Device has partner keys N/A

UC Features

Tested feature Result
Video calls possible? Yes - Transmit only
Video conference possible? (max. amount of participants) N/A
Video Codecs H263-1998 / H264
enable/disable video during call No
Set own presence possible? N/A
See presence of others possible? N/A
chat with mypbx client possible? N/A
chat with same vendor client possible? N/A
send IM - messages to phones possible? N/A

Configuration

innovaphone configuration

3rd party product configuration

Note: The IP Door Phone Nista IP39-4x series configuration detailed description can be found in the IP Door Phone Nista IP39-4x series user manual document, which is allowed for review and downloading from the Manufacturer-Nista Devices GmbH official web site  Downloads page: http://www.nistadevices.com/SitePages/downloads.aspx

  • a) Web Administration Login Screen; The Default Login Credentials: User Name:admin; Password: 1234

  • b) Network Parameters Configuration screen

  • c) SIP Account Configuration screen

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Nista-IP39-4x_-_Nista_Devices_GmbH_-_Testreport&oldid=39220"