Reference9:DECT2/Config/Air Sync
Jump to navigation
Jump to search
In this menu, the local DECT synchronisation configuration can be changed.
- Sync Mode:
- Slave: the Radio will try to synchronise to other Radios in the sync region.
- Master: in this mode the Radio will act as primary synchronisation source for other Radios in the sync region.
- Sync RFPI: an optional RFPI to synchronize a Radio in Slave Sync Mode from. If no RFPI defined, the Radio will try to find the other Radios to synchronize from automatically.
- Alternative sync RFPI:
- Reference RFPI: an optional synchronisation reference can be provided to synchronize the Sync Master from. Can be used to sync to other DECT systems running nearby to prevent interference.
- Alternative reference RFPI:
- Sync Region: coherent Radios should have the same Sync Region configured.
- Action at reference sync failure:
- Resynchronize on command
- Resynchronize daily
- Resynchronize weekly