Summary
Certification Status
<internal>
Beim Abschluss des Tests (egal ob gut, schlecht oder abgebrochen) bitte Nachricht an ckl!
</internal>
Version
Firmware Version:
1.0.2.5
Hardware Version:
1.0.0.1
innovaphone Firmware:
SR2 HF5
Test Setup
Device Setup
| Tested feature
|
Result
|
| Register Device w/o specific configuration (requires DHCP)
|
|
| DHCP is default
|
|
| DHCP yields timeserver and time displays correctly
|
|
| SNTP config has TZ string for timezone/dst autoconfig
|
|
| DHCP yields correct default gateway
|
|
| Device supports magic registration (e.g. by serial)
|
|
| Fixed registrations works
|
|
| Device registers w/o Extension (just by name)
|
|
| Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|
|
| Device registers by extension
|
|
| Device registers with password
|
|
| Device registers multiple identities
|
|
| 2nd GK is supported (mit SIP??)
|
|
| Changing registrations between GK1 and GK2 (mit SIP??)
|
|
| PBX redirect (UserObject on Master/Phone at Slave registered)
|
|
| Physical Location (@PBX) correct?
|
|
| Device supports STUN protocol
|
|
| Device sends NAT - keepalive messages
|
|
| Device usable in hosting scenarios?
|
|
| Device refreshes the PBX registration
|
|
| Device supports SIP over TCP
|
|
| Device supports SRTP
|
|
| Device supports SIPS (SIP over TLS)
|
|
| Device supports HTTPS
|
|
| Device supports VAD (Voice activity detection)
|
|
| Device supports Auto-Answer (needed when used with CTI client)
|
|
| Supported menu languages
|
|
Test Results
|
FIXME: Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report
|
Basic Call
| Tested feature
|
Result
|
| call using g711a
|
|
| call using g711u
|
|
| call using g729
|
|
| call using g722
|
|
| Overlapped sending
|
|
| Device sets up an early media channel for incoming calls
|
|
| Device sets up an early media channel for outgoing calls
|
|
| Device shows called id number
|
|
| Device shows called id name
|
|
| Device shows called id display info
|
|
| Fax using T.38
|
|
| CGPN can be suppressed
|
|
| Reverse Media Negotiation
|
|
| Device shows CDPN/CGPN on incoming call
|
|
| Device shows CDPN/CGPN on outgoing call
|
|
| Device shows connected number
|
|
| Device shows diverting number
|
|
| Device supports distinctive ringing
|
|
| Device supports asymetric codec negotiation
|
|
| Device supports codec renegotiation during a conversation
|
|
| Device shows correct display message in case of busy CDPN
|
|
| Device shows correct display message in case of not existing CDPN
|
|
| Device shows correct display message in case that the call is declined
|
|
| 3party conference possible
|
|
| Device supports display updates during call(needed for Directory Search object)
|
|
| Long Time Call (>30 min) works?
|
|
| Registration redirecting works?
|
|
| Incoming SRTP call - SRTP not enabled on DUT
|
|
| Incoming SRTP call - SRTP enabled on DUT
|
|
| Voice Quality OK?
|
|
DTMF
| Tested feature
|
Result
|
| DTMF tones sent correctly
|
|
| DTMF tones received correctly
|
|
Hold/Retrieve
| Tested feature
|
Result
|
| Device handles incoming hold correctly
|
|
| Device can put a call on hold using correctly(inactive or sendonly)
|
|
Transfer with consultation
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
|
|
| inno1 calls inno2. inno1 transfers to testphone.
|
|
|
| inno1 calls testphone. inno1 transfers to inno2.
|
|
|
| inno1 calls testphone. testphone transfers to inno2.
|
|
|
| testphone calls inno1. inno1 transfers to inno2.
|
|
|
| testphone calls inno1. testphone transfers to inno2.
|
|
|
Transfer with consultation (alerting only)
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
|
|
| inno1 calls inno2. inno1 transfers to testphone.
|
|
|
| inno1 calls testphone. inno1 transfers to inno2.
|
|
|
| inno1 calls testphone. testphone transfers to inno2.
|
|
|
| testphone calls inno1. inno1 transfers to inno2.
|
|
|
| testphone calls inno1. testphone transfers to inno2.
|
|
|
Blind Transfer
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
|
| inno1 calls inno2. inno1 transfers to testphone.
|
|
| inno1 calls testphone. inno1 transfers to inno2.
|
|
| inno1 calls testphone. testphone transfers to inno2.
|
|
| testphone calls inno1. inno1 transfers to inno2.
|
|
| testphone calls inno1. testphone transfers to inno2.
|
|
Blind Transfer (alerting only)
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
|
| inno1 calls testphone. testphone transfers to inno2.
|
|
| testphone calls inno1. inno1 transfers to inno2.
|
|
Broadcast Group & Waiting Queue
| Tested feature
|
Result
|
| testphone makes call to a Broadcast Group. inno1 picks up.
|
|
| inno1 makes call to a Broadcast Group. testphone picks up.
|
|
| testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
|
| testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
|
| inno1 makes call to a Waiting Queue. testphone picks up.
|
|
DTMF Features
| Tested feature
|
Result
|
| CFU Activate/Deactivate
|
|
| CFB Activate/Deactivate
|
|
| CFNR Activate/Deactivate
|
|
| Pickup Group
|
|
| Pickup Directed
|
|
| Park/Unpark
|
|
| Park To/Unpark From
|
|
| Call Completion Busy
|
|
| Call Completion Cancel
|
|
| Join Group/Leave Group
|
|
| Join All Groups/Leave All Groups
|
|
| Enable mobility/Disable mobility
|
|
| Enable mobility cw/Disable mobility cw
|
|
| Set presence
|
|
Other Features
Directory
| Tested feature
|
Result
|
| Device built-in directory
|
| Exists
|
|
| Can be dialled from
|
|
| Does CLI resolution
|
|
| display update if directory object is used?
|
|
| Tested feature
|
Result
|
| External LDAP Server supported
|
|
| Can be dialled from
|
|
| Does CLI resolution
|
|
| display update if directory object is used?
|
|
Keys
| Tested feature
|
Result
|
| Device has speed dial keys
|
|
| Device has programmable function keys
|
|
| Device has partner keys
|
|
CTI Features (with SOAP / TAPI / myPBX)
| Tested feature
|
Result
|
| User Call - outgoing call
|
|
| User Connect - Answer incoming call
|
|
| User Reject - Reject alerting call
|
|
| User Disconnect - Disconnect active call
|
|
| User Hold - Put connected call on hold
|
|
| User Hold Retrieve - Retrieve call on hold
|
|
| User Transfer - Transfer with Consult
|
|
| User Transfer - Transfer with Consult (Alerting only)
|
|
| User Transfer - Blind Transfer
|
|
| User DTMF - send DTMF digits via dialpad during active call
|
|
| 3PTY - Make 3rd Party Call
|
|
| Connected Number Update on Display
|
|
UC Features
| Tested feature
|
Result
|
| Video calls possible?
|
|
| Video conference possible? (max. amount of participants)
|
|
| Video Codecs
|
|
| enable/disable video during call
|
|
| Set own presence possible?
|
|
| See presence of others possible?
|
|
| chat with mypbx client possible?
|
|
| chat with same vendor client possible?
|
|
| send IM - messages to phones possible?
|
|
Configuration
innovaphone configuration
3rd party product configuration
Related Articles