Datasheet IP174
Jump to navigation
Jump to search
Firmware
Device operated with Version 16 and higher
Housing
- Frontside 87mm-Speaker 4Ohm
- IP66 enclosure for exposed use, water tight and salt mist resistant
- Foiled telephone keypad
- 5 foiled call mode keys (hands-free, direct/priority, PTT, volume)
- Call indicator
- Measurements (W x D x H): 130 x 70 x 303 mm
- Bulkhead mount
Interfaces
- 10/100-BASE-TX (auto negotiation), RJ-45 (modular Jack 8P8C)
- 24V PSU external power supply (input)
- 24V DC output (500mA)
- Relay (NO/NC)
- Handset (6-wire)
- Headset (6-wire) PTT support
- Speaker (10W)
- Rear USB port - internal use only
Hardware
- Power supply: „Power over Ethernet+“ according to IEEE 802.3at, Class 4
- 128MByte RAM, 16MByte Flash
- Operation temperature: -25 °C to +70 °C
- Humidity: 10% to 90% (not condensed)
- Storage temperature: -10 °C to +70 °C
Voice Codecs
- G.711 A-law / μ-law, G.722, Opus-NB, Opus-WB
- Dynamic Jitter Buffering
- Acoustic echo cancellation
- Voice Activity Detection
- Comfort Noise Generation
VoIP Protocols
- H.323 Version 5, including proprietary extensions
- H.323 over UDP, TCP, TLS 1.3
- SIP Version 2, conform RFC 3261
- SIP over UDP, TCP, TLS
- RTP, SRTP (SDES, DTLS 1.2), RTCP, ICE
Network
- IPv4/IPv6 Support
- NAT, H.323-NAT, STUN, TURN over UDP/TCP
- RSTP, EAP-TLS/EAP-MD5 acc. to IEEE 802.1X
- LDAP/S support
- DHCP support
- NTP support
- VLAN-ID acc. to IEEE 802.1Q
- LLDP support for VLAN configuration
- PPPoE, manual or automatic connection after boot
- PPTP Tunneling up to 4 tunnels simultaneously, encoding via MPPE
Administration
- Password protected administration access via web-browser, optional two-factor authentication
- Store and restore configuration files
- System-wide automatic upgrade of firmware and configuration data via the myApps Devices app
- Automatic ping connection test
- Display of interface and connection status
- Generation of log and trace files and SNMP.V3-traps
Supplementary Services (Excerpt)
- Dialogue guidance in 20 languages, can be extended
- Cestina, Dansk, Deutsch, Eesti, English, Español, Français, Hrvatski, Italiano, Latviešu, Magyar, Nederlands, Norsk, Polski, Português, Slovenija, Suomi, Svenska, ภาษาไทย
- Announcement function, for authorised subscribers
- Display message waiting
- Mute, deactivates microphone for a short time
- Three party conference, also with external subscribers
- DTMF tone recognition
- Call transfer, with/without consultation
- Hold, supported by Music-on-Hold
- Transmit subscriber name along with signalling
- Call waiting, respective signalling of waiting call to caller
- DTMF tone generation
Supplementary Features
- Hands free key – Full duplex handsfree calls
- Direct in key – Full duplex intrusion to idle or busy (can be disabled)
- PTT key – Talkback and classic PTT use (mic mute feature)
- Zone announcements – unlimited zones
Licenses
innovaphone terminals (IP1xx, IP2xx, IP6x, IP7x) do not require any special device licenses
Conformities
see separate information sheet
Order Number: 01-17415-001
innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 1997-2025 innovaphone® AG

