LDAP innovaphone and Polycom DECT: Difference between revisions
(ldap guest -> ldap-guest) |
(=) |
||
Line 22: | Line 22: | ||
'''3 Bind Password: = ipxxx''' The password of the “LDAP user” in the innovaphone server (default password is ipxxx in the innovaphone). | '''3 Bind Password: = ipxxx''' The password of the “LDAP user” in the innovaphone server (default password is ipxxx in the innovaphone). | ||
'''4 Base: = pbx0''' The name of the LDAP server to be connected to internally in the innovaphone (pbx0 in this case). | '''4 Base: = pbx0''' The name of the LDAP server to be connected to internally in the innovaphone (pbx0 in this case). | ||
'''5 Filter: = (node root)''' In this scenarion set to (node=root) so that the LDAP query is done one the right node. Filtering of the LDAP objects is done in the innovaphone under each object. | '''5 Filter: = (node=root)''' In this scenarion set to (node=root) so that the LDAP query is done one the right node. Filtering of the LDAP objects is done in the innovaphone under each object. | ||
'''6 Attributes: = cn, e164,''' is the 2 objects that the LDAP request when entering the menu from the handset asks for from the LDAP server CN= name and e164 = number | '''6 Attributes: = cn, e164,''' is the 2 objects that the LDAP request when entering the menu from the handset asks for from the LDAP server CN= name and e164 = number | ||
'''7 Number Attributes: = e164''' Shall be E164, this is the field used so that the handset automatically can dial the number shown in the display after an ldap query. | '''7 Number Attributes: = e164''' Shall be E164, this is the field used so that the handset automatically can dial the number shown in the display after an ldap query. |
Revision as of 10:17, 15 June 2017
Applies To
This information applies to
- IP 800, V9
- Polycom/Spetraclink/Kirk IP-DECT 300/2500/6000/8000
More Information
How to configure the Polycom/Spetraclink/Kirk LDAP replicator towards the phonebook provided from the innovaphone PBX (LDAP server) as a common phonebook also for the DECT system.
Problem Details
System Requirements
V9 ldap activated and Polycom Wireless Server 300/2500/6000/8000
Installation
Configuration
Log on to the Polycom web gui. Click on administration/phonebook and choose LDAP. Then follow these steps.
Step by step guide. 1 URI = ldap://+the ip-adress' of the LDAP phonebook in this scenario the IP800 2 Bind User: = ldap-guest The name of the “LDAP user” in the innovaphone server (in this case "ldap-guest" that is default in the innovaphone). 3 Bind Password: = ipxxx The password of the “LDAP user” in the innovaphone server (default password is ipxxx in the innovaphone). 4 Base: = pbx0 The name of the LDAP server to be connected to internally in the innovaphone (pbx0 in this case). 5 Filter: = (node=root) In this scenarion set to (node=root) so that the LDAP query is done one the right node. Filtering of the LDAP objects is done in the innovaphone under each object. 6 Attributes: = cn, e164, is the 2 objects that the LDAP request when entering the menu from the handset asks for from the LDAP server CN= name and e164 = number 7 Number Attributes: = e164 Shall be E164, this is the field used so that the handset automatically can dial the number shown in the display after an ldap query. 8 Attributes Names: = Name, Number, is the texts shown in the display of the DECT handset when the LDAP query is performed, in this case Name & Number 9 Replace prefixes +=00 Default data in the ip-dect. 10 Load interval: = 60 Interval for updating of the phonebook, the DECT system reads and stores the changes every 60 seconds in this case.
Known Problems
[[Category:Howto|Template:Configure LDAP phonebook in Polycom IP-DECT]]