Howto:Sewan SIP Provider Compatibility Test: Difference between revisions

← Older edit

VisualWikitext

Latest revision as of 14:48, 25 October 2011

Innovaphone Compatibility Test Report

Summary

SIP Provider: Sewan (France)

Features:

- Direct Dial In
- DTMF

Supported Codecs by the provider
- G711
- G729
- T.38

The provider does not support all required innovaphone features and is therefore not qualified as recommended SIP Provider.

Current test state

The tests for this product could not be completed or not all mandatory tests were passed. See the Summary section for more details.

Testing of this product has been finalized September 16th, 2011.

Testing Enviroment

Scenario

This scenario describes a setup where the PBX and phones are in a private network. The provider supports NAT detection. As a result, the IP800 can work without a stun server.

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature	Result
call using g711a	Yes
call using g711u	Yes
call using g723	No
call using g729	Yes
Overlapped sending	No
early media channel	Yes
Fax using T.38	Yes
CGPN can be suppressed	Yes
CLIP no screening	Yes
Reverse Media Negotiation	Yes
Long time call possible	Yes
External Transfer	Yes, requires MediaRelay
NAT Detection	Yes
Voice Quality OK?	Yes

Direct Dial In

Tested feature	Result
Inbound(Provider -> Innovaphone)	Yes
Outbound(Innovaphone -> Provider)	No, CGPN number is displayed only as anonym

DTMF

Tested feature	Result
DTMF tones sent correctly	Yes
DTMF tones sent correctly via SIP-Info	Yes
DTMF tones received correctly	Yes

Hold/Retrieve

Tested feature	Result
Call can be put on hold	Yes
Held end hears music on hold / announcement from PBX	Yes, but with audible distortion. Requires MR and exclusive coder.
Held end hears music on hold / announcement from provider	Yes

Transfer with consultation

Tested feature	Result
Call can be transferred	Yes
Held end hears music on hold	Yes
Call returns to transferring device if the third Endpoint is not available	Yes

Transfer with consultation (alerting only)

Tested feature	Result
Call can be transferred	Yes
Held end hears music on hold or dialling tone	Yes
Call returns to transferring device if the third Endpoint is not available	Yes

Blind Transfer

Tested feature	Result
Call can be transferred	Yes
Held end hears dialling tone	Yes

Broadcast Group & Waiting Queue

Tested feature	Result
Caller can make a call to a Broadcast Group	Yes
Caller can make a call to a Waiting Queue	Yes
Announcement if nobody picks up the call	Yes

Configuration

General Information

Firmware version

IP800: 9.00 hotfix1
IP22: 8.00 hotfix16 - build 805005400
IP200: 9.00 hotfix1
IP230: 9.00 hotfix1

SIP - Trunk

First of all the SIP Trunk must be configured. Make sure that Media Relay is activated.

Number Mapping

The complicated part on this issue is the correct mapping of the outgoing and incoming numbers.

Route Settings

Because Sewan, as most SIP - Providers too, doesn't support overlap sending, you must enable the blockwise sending of the phone number. You can do this by enabling Force enblock in the automatically generated Routes.

The second setting you must check is Interworking(QSIG,SIP). This feature must be enabled to properly relay supplementary services, like Hold over the SIP Trunk. If this checkbox is unchecked only basic call Information like connect and disconnect will be forwarded by the Gateway.

Fax

The FAX was connected via a IP22 to the IP800. When configuring the IP22 you must keep in mind that you will use the analog interface for fax communication. That's why the T.38 codec must be enabled.

CLIR

To suppress the CGPN for outbound calls a config line option must be activated. Please enter the following lines in your browser:

http://PBX-IP-address/!config add SIP /pai
http://PBX-IP-address/!config write
http://PBX-IP-address/!config activate

@@ Line 13: / Line 13: @@
 ** G711
 ** G729
+** T.38
+The provider does not support all required innovaphone features and is therefore not qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].
 <!--
-The provider does support all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].
+Sewan has achieved 96% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]]
-SilverServer  has achieved 85% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]]
+A major drawback of this provider is that it cannot play the Music on Hold (MoH) from the PBX. Instead the standard MoH of the provider is played to hold PSTN endpoints. Sewan & innovaphone are still working on this issue.
 -->
 == Current test state ==
 <!--{{Template:Compat Status "tested"}}-->
-{{Template:Compat Status "in progress"}}
+<!--{{Template:Compat Status "in progress"}}-->
 <!--{{Template:Compat Status "certified"|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}}-->
-<!--{{Template:Compat Status "rejected"}}  -->
+{{Template:Compat Status "rejected"}}
-<!--Testing of this product has been finalized June 20th, 2011.-->
+Testing of this product has been finalized September 16th, 2011.
 == Testing Enviroment ==
@@ Line 61: / Line 65: @@
 |----
 |Fax using T.38
-|No (one way only)
+|Yes
 |----
 |CGPN can be suppressed
@@ Line 76: / Line 80: @@
 |----
 |'''External Transfer'''
-|'''No(no audio)'''
+|'''Yes, requires MediaRelay'''
+|----
+|NAT Detection
+|Yes
 |----
 |Voice Quality OK?
@@ Line 89: / Line 96: @@
 |----
 |'''Inbound(Provider -> Innovaphone)'''
-|'''No(incorrect CGPN)'''
+|'''Yes'''
 |----
 |'''Outbound(Innovaphone -> Provider)'''
-|'''Yes'''
+|'''No, CGPN number is displayed only as anonym'''
 |}
@@ Line 121: / Line 128: @@
 |----
 |Held end hears music on hold / announcement from PBX
-|Yes
+|Yes, but with audible distortion. Requires MR and exclusive coder.
 |----
 |Held end hears music on hold / announcement from provider
@@ Line 199: / Line 206: @@
 *IP200: 9.00 hotfix1
 *IP230: 9.00 hotfix1
+=== SIP - Trunk ===
+First of all the SIP Trunk must be configured. Make sure that Media Relay is activated.
+[[Image:Sewan SIP Provider Compatibility Test 1.PNG]]
+=== Number Mapping ===
+The complicated part on this issue is the correct mapping of the outgoing and incoming numbers.
+[[Image:Sewan SIP Provider Compatibility Test 2.PNG]]
+=== Route Settings ===
+Because Sewan, as most SIP - Providers too, doesn't support overlap sending, you must enable the blockwise sending of the phone number. You can do this by enabling ''Force enblock'' in the automatically generated Routes.
+The second setting you must check is Interworking(QSIG,SIP). This feature must be enabled to properly relay supplementary services, like Hold over the SIP Trunk. If this checkbox is unchecked only basic call Information like connect and disconnect will be forwarded by the Gateway.
+[[Image:Sewan SIP Provider Compatibility Test 3.PNG]]
+=== Fax ===
+The FAX was connected via a IP22 to the IP800. When configuring the IP22 you must keep in mind that you will use the analog interface for fax communication. That's why the T.38 codec must be enabled.
+[[Image:Sewan SIP Provider Compatibility Test 4.PNG]]
+===CLIR===
+To suppress the CGPN for outbound calls a config line option must be activated. Please enter the following lines in your browser:
+ <nowiki>http://PBX-IP-address/!config add SIP /pai</nowiki>
+ <nowiki>http://PBX-IP-address/!config write</nowiki>
+ <nowiki>http://PBX-IP-address/!config activate</nowiki>
 [[Category:Compat|{{PAGENAME}}]]

Howto:Sewan SIP Provider Compatibility Test: Difference between revisions

Latest revision as of 14:48, 25 October 2011

Contents

Summary

Current test state