Reference9:Rerouting Causes: Difference between revisions
Jump to navigation
Jump to search
(New page: An outgoing call my fail. Depending on the cause the call fails with, a re-routing is performed. Causes causing rerouting are: * #1 "Unallocated (unassigned) number" * #2 "No route to spe...) |
mNo edit summary |
||
| Line 1: | Line 1: | ||
An outgoing call my fail. | An outgoing call my fail. | ||
Depending on the cause the call fails with, a re-routing is performed. | Depending on the [[Reference:ISDN Cause Codes | cause ]] the call fails with, a re-routing is performed. | ||
Causes causing rerouting are: | Causes causing rerouting are: | ||
| Line 16: | Line 16: | ||
<!-- cause code --> | <!-- cause code --> | ||
This mechanism is implemented both in the PBX [[ Reference9:PBX/Objects/Gateway | Gateway ]] object and in the [[ Reference9:PBX/Objects/Trunk_Line | Trunk ]] object as well as in the gateway level [[ Reference9:Gateway/Routes | routing engine ]]. | This mechanism is implemented both in the PBX [[ Reference9:PBX/Objects/Gateway | Gateway ]] object and in the [[ Reference9:PBX/Objects/Trunk_Line | Trunk ]] object as well as in the gateway level [[ Reference9:Gateway/Routes | routing engine]]. | ||
Re-routing calls which failed due to one of the first 4 causes (''Unallocated (unassigned) number'', ''No route to specified transit network'', ''No route to destination'' and ''No user responding'') may not always be desirable. There is a ''No Reroute on wrong No'' option available in the [[ Reference9:Gateway/Routes/Map | gateway routes ]] to disable this. The PBX will not re-route on these causes. | Re-routing calls which failed due to one of the first 4 causes (''Unallocated (unassigned) number'', ''No route to specified transit network'', ''No route to destination'' and ''No user responding'') may not always be desirable. There is a ''No Reroute on wrong No'' option available in the [[ Reference9:Gateway/Routes/Map | gateway routes ]] to disable this. The PBX will not re-route on these causes. | ||
Revision as of 16:11, 19 April 2011
An outgoing call my fail. Depending on the cause the call fails with, a re-routing is performed.
Causes causing rerouting are:
- #1 "Unallocated (unassigned) number"
- #2 "No route to specified transit network"
- #3 "No route to destination"
- #18 "No user responding"
- #34 "No circuit/channel available"
- #38 "Network out of order"
- #41 "Temporary failure"
- #42 "Switching equipment congestion"
- #44 "Requested circuit/channel not available"
- #47 "Resources unavailable, unspecified"
- #49 "Quality of service unavailable"
This mechanism is implemented both in the PBX Gateway object and in the Trunk object as well as in the gateway level routing engine.
Re-routing calls which failed due to one of the first 4 causes (Unallocated (unassigned) number, No route to specified transit network, No route to destination and No user responding) may not always be desirable. There is a No Reroute on wrong No option available in the gateway routes to disable this. The PBX will not re-route on these causes.