Howto:Config size Limitations: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 12: Line 12:
There are various restrictions when configuring the relay:
There are various restrictions when configuring the relay:


* the total size of the config fiile (all that starts with "config change") must not exceed 64k
* the total size of the config fiile (all that starts with "config change") must not exceed 64kb
* the total line length of a config file line must not exceed 2048 bytes
* the total line length of a config file line must not exceed 8kb
* the number of words on a config line is limited
* the number of words on a config line is limited



Revision as of 15:47, 27 January 2012

FAQ

How many "alias" (E.164 number and H.323 id) can I configure under a GW interface?

If I try to register a GW interface on a Gatekeeper the registration is OK only if I configure up to 31 alias. If I try with 32 the registration fail.


Answer

No more than 32 alias entries are allowed on one Gatekeeper/Registrar interface.

There are various restrictions when configuring the relay:

  • the total size of the config fiile (all that starts with "config change") must not exceed 64kb
  • the total line length of a config file line must not exceed 8kb
  • the number of words on a config line is limited


So if there is a problem, you can try to use shorter aliases, leave out the e164 (redundant anyway) or split it into 2 GWx entries. Nevertheless, it is ugly.





Related Articles