Howto:FC4 - Funkwerk -Testreport: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
← Older editNewer edit →
VisualWikitext
Line 37: Line 37:
!Result
!Result
|----
|----
|Fixed registrations works
|Automatic Search & Subscription
|
|Yes
|----
|----
|Device registers w/o Extension (just by name)
|Multiple Profiles for Subscription
|
|Yes
|----
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|Call Lists/ Missed Calls
|
|Yes
|----
|----
|Device registers by extension
|Multiple Ringtones
|
|Yes
|----
|----
|Device registers with password
|Phone/Screen PIN Lock
|
|Yes
|----
|----
|Device registers multiple identities
|Extra Applications (Alarm,Calendar,etc)
|
|Yes
|----
|----
|2nd GK is supported (mit SIP??)
|Signal Strength Indication and Charge Indication
|
|Yes
|----
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|Messaging
|
|No
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|
|----
|Physical Location (@PBX) correct?
|
|----
|Device supports STUN protocol
|
|----
|Device sends NAT - keepalive messages
|
|----
|Device refreshes the PBX registration
|
|----
|Device supports VAD (Voice activity detection)
|
|----
|----
|Supported menu languages
|Supported menu languages

Revision as of 12:43, 4 October 2012

FIXME: in progress

Summary

Certification Status

Version

Firmware Version: 

2.1.18.1 Rev 4227

Hardware Version: 

Type:5010801100 Ver.0x02

innovaphone Firmware: 

V9 HF16

Test Setup

Device Setup

Tested feature Result
Automatic Search & Subscription Yes
Multiple Profiles for Subscription Yes
Call Lists/ Missed Calls Yes
Multiple Ringtones Yes
Phone/Screen PIN Lock Yes
Extra Applications (Alarm,Calendar,etc) Yes
Signal Strength Indication and Charge Indication Yes
Messaging No
Supported menu languages Yes

Test Results

Basic Call

Tested feature Result
call using g711a
call using g711u
call using g729
Overlapped sending
Device sets up an early media channel for incoming calls
Device sets up an early media channel for outgoing calls
Device shows called id number
Device shows called id name
Device shows called id display info
Fax using T.38
CGPN can be supressed
Reverse Media Negotiaton
Device shows CDPN/CGPN on incoming call
Device shows CDPN/CGPN on outgoing call
Device shows connected number
Device shows diverting number
Device supports distinctive ringing
Device supports asymetric codec negotiation
Device supports codec renegotiation during a conversation
Device shows correct display message in case of busy CDPN
Device shows correct display message in case of not existing CDPN
Device shows correct display message in case that the call is declined
SOAP Call works?
Device supports display updates during call(needed for Directory Search object)
Long Time Call (>30 min) works?
Registration redirecting works?
Incoming SRTP call - SRTP not enabled on DUT
Incoming SRTP call - SRTP enabled on DUT
Voice Quality OK?

DTMF

Tested feature Result
DTMF tones sent correctly
DTMF tones received correctly


Hold/Retrieve

Tested feature Result
Device handles incoming hold correctly
Device can put a call on hold using correctly(inactive or sendonly)

Transfer with consultation

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.
inno1 calls inno2. inno1 transfers to testphone.
inno1 calls testphone. inno1 transfers to inno2.
inno1 calls testphone. testphone transfers to inno2.
testphone calls inno1. inno1 transfers to inno2.
testphone calls inno1. testphone transfers to inno2.

Transfer with consultation (alerting only)

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.
inno1 calls inno2. inno1 transfers to testphone.
inno1 calls testphone. inno1 transfers to inno2.
inno1 calls testphone. testphone transfers to inno2.
testphone calls inno1. inno1 transfers to inno2.
testphone calls inno1. testphone transfers to inno2.

Blind Transfer

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.
inno1 calls inno2. inno1 transfers to testphone.
inno1 calls testphone. inno1 transfers to inno2.
inno1 calls testphone. testphone transfers to inno2.
testphone calls inno1. inno1 transfers to inno2.
testphone calls inno1. testphone transfers to inno2.

Blind Transfer (alerting only)

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.
inno1 calls testphone. testphone transfers to inno2.
testphone calls inno1. inno1 transfers to inno2.

Broadcast Group & Waiting Queue

Tested feature Result
testphone makes call to a Broadcast Group. inno1 picks up.
inno1 makes call to a Broadcast Group. testphone picks up.
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
inno1 makes call to a Waiting Queue. testphone picks up.

DTMF Features

Tested feature Result
CFU Activate/Deactivate
CFB Activate/Deactivate
CFNR Activate/Deactivate
Pickup Group
Pickup Directed
Park/Unpark
Park To/Unpark From
Call Completion Busy
Call Completion Cancel
Join Group/Leave Group
Join All Groups/Leave All Groups
Enable mobility/Disable mobility
Enable mobility cw/Disable mobility cw
Set presence

Other Features

Directory

Tested feature Result
Device built-in directory
Exists
Can be dialled from
Does CLI resolution
display update if directory object is used?


Tested feature Result
External LDAP Server supported
Can be dialled from
Does CLI resolution
display update if directory object is used?


Keys

Tested feature Result
Device has speed dial keys
Device has programmable function keys
Device has partner keys

Configuration

innovaphone configuration

3rd party product configuration

Related Articles

FC4 - Funkwerk - 3rd Party Product

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:FC4_-_Funkwerk_-Testreport&oldid=26455"