Howto:Innovaphone Phones on FritzBox: Difference between revisions
Mediarunway (talk | contribs) No edit summary |
Mediarunway (talk | contribs) |
||
Line 35: | Line 35: | ||
===Voicemail on/off Key=== | ===Voicemail on/off Key=== | ||
Add an "Dial" function key | Add an "Dial" function key. Insert in Action>Number the Fritz-Box-VM owns number **600, followed from one waiting command "," and the FritBox-VM DTMF Command for on/off "3". | ||
[[Image:Innofritz-on-off.PNG]] | [[Image:Innofritz-on-off.PNG]] |
Revision as of 13:59, 21 March 2018
Applies To
This information applies to
innovaphone IP Phones User Configuration for registering on FritzBox
More Information
Configuration FritzBox User
Configurate a User on FritzBox like this:
Configuration innovaphone User Config
Configurate innovaphone User like this:
Configuration Message Waiting Key
innovaphone phones support RFC 3842 which defines SIP based message waiting procedure.
This enables definition and use of message waiting function key and lamp to access FritzBox-built-in voicemail service.
By default, FritzBox-VM owns number **600. Any further described configuration assume this as default. If this is changed by user or manufacturer, configuration below has to be adapted.
Control of MWI-LED and voicemail access via function key requires definition of both number and name as follows:
- Number: <FritzBox-VM>@fritz.box - default **600@fritz.box ; do NOT tick Append Own Number
- Name: <username>@fritz.box
Voicemail on/off Key
Add an "Dial" function key. Insert in Action>Number the Fritz-Box-VM owns number **600, followed from one waiting command "," and the FritBox-VM DTMF Command for on/off "3".