Reference:Administration/Relay/Interfaces/Physical: Difference between revisions
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
== Interface Maps == | == Interface Maps == | ||
The number mapping on the interface can be either configured manually, or predefined mappings for ISDN Point to Point or ISDN Point to Multipoint interfaces can be used. If predefined mappings are used they can be edited the same way as manual mappings, but if they are changed they are not recognized as predefined mapping anymore. | |||
=== Point to Point === | |||
== Registration == | == Registration == | ||
Revision as of 15:04, 20 November 2007
On this page a physical interface (ISDN or FXS) can be configured for Gateway use. Number mapping may be configured to normalize the called and calling numbers for internal use. An interface may be registered to a gatekeeper. If this is configured a VOIP interface and routes are generated automatically.
General Configuration
| Name | Name of the interface. This name is used for local administration only (e.g. it is display in the routing table) |
| Disable | Used to disable the interface without deleting the config |
| Tones | This configures the tone scheme for this interface |
Interface Maps
The number mapping on the interface can be either configured manually, or predefined mappings for ISDN Point to Point or ISDN Point to Multipoint interfaces can be used. If predefined mappings are used they can be edited the same way as manual mappings, but if they are changed they are not recognized as predefined mapping anymore.