Howto:Nokia Mobile Phones E Series: Difference between revisions
No edit summary  | 
				mNo edit summary  | 
				||
| Line 11: | Line 11: | ||
*        all innovaphone PBX  | *        all innovaphone PBX  | ||
Build V6 07-  | Build V6 07-60786,  and later  | ||
*        Nokia E65  | *        Nokia E65  | ||
Revision as of 11:50, 3 January 2008
Innovaphone Compatibility Test Report
This Article describes how to connect (and what is working) Nokia E Series Mobile phone (dual-mode phone ) with innovaphone Pbx.
Tested with the Nokia E65
Applies To
This information applies to
- all innovaphone PBX
 
Build V6 07-60786, and later
- Nokia E65
 
Software version: 1.0633.58.03 and 2.0633.65.01
innovaphone configuration
set a normal user in the PBX
for example
Long Name: E60
Name: E60
Number: 60
Nokia E65:
Settings on Nokia E65
Sip Settings
Navigate to Tools->Settings->Connection->SIP settings:
Profile name: "innovaphone" (or anything else)
Service profile: IETF
Default access point: <your wifi access point>
Public user name: sip:E60@<IP address of your innovaphone pbx>
Use compression: No
Registration: Always on
Use security: No
Proxy server
tools -> settings -> connection -> SIP settings -> Proxy Server
Proxy server address: sip:<IP address of your innovaphone pbx>
Realm: <IP address of your IP800>
User name: E60
Password: <secret>
Allow loose routing: Yes
Transport type: UDP
Port: 5060
Registrar server
tools -> settings -> connection -> SIP settings -> Registrar Server
Registrar serv.addr.:<IP address of your innovaphone pbx>
Realm: <IP address of your innovaphone pbx>
User name: E60
Password: <secret>
Transport type: UDP
Port: 5060
Internet tel settings
tools -> settings -> connection -> Internet tel settings
give the name and profile
For trouble shooting purpose take the option of Wireless LAN 
tools -> settings -> connection -> Wireless LAN
Show availability Yes
Scan for Networks every minute
Supported Codecs
| Codec | Applies | 
|---|---|
| G711 | yes | 
| G729 | yes | 
| G723 | not supported by nokia | 
| G726 | not supported by nokia | 
| GSM | no | 
| T.38 UDP | no | 
| G722 | not supported by nokia | 
Test Results
Tested with innovaphone PBX and innovaphone IP phones connected with H.323 to the PBX
Summary:
- The voice quality is good - hold/retrieve is working (from Nokia and from innovaphone phone).
 
- Transfer with consultation is working (but only when there is no codec change)
 
- semi attendant transfer - or so called transfer without consultation is not working
 
- Blind transfer is working
 
- with Nokia phone version 2.0633.65.01 it is also possibe to transfer the call from the Nokia phone to another endpoint
 
Basic Call
| Tested feature | Result | 
|---|---|
| call using g711a | yes | 
| call using g711u | yes | 
| call using g723 | no | 
| call using g729 | yes | 
| Overlapped sending | yes | 
| early media channel | not tested | 
| Fax | no | 
| Voice Quality OK? | yes | 
Dial Inward
| Tested feature | Result | 
|---|---|
| Inbound(nokia -> innovaphone Phone & via isdn) | yes | 
| Outbound(innovaphone Phone & via isdn -> nokia) | yes | 
DTMF
| Tested feature | Result S1 | 
|---|---|
| DTMF tones sent correctly | yes | 
| DTMF tones received correctly (audible) | no | 
Hold/Retrieve
hold possible with the Nokia phone and the innovaphone phone
| Tested feature | Result | 
|---|---|
| Device can put call on hold | yes | 
| Holding end hears music on hold | no - instead one beep tone and information on display that call is on hold | 
| Device can terminate either call and retrieve remaining call | yes (nokia device and innovaphone IP Phone) | 
Transfer with consultation
Transfer only working when there is no codec change
| Tested feature | Result | 
|---|---|
| Device can transfer call | yes | 
| Holding end hears music on hold | no-instead one beep tone and information on display that call is on hold | 
| Call returns to transferring device if the third
 Endpoint is not available  | 
yes | 
Transfer with consultation (alerting only)
| Tested feature | Result | 
|---|---|
| Device can transfer call | no | 
| Held end hears music on hold or dialing tone | no - instead one beep tone and information on display that call is on hold | 
| Call returns to transferring device if the third
 Endpoint is not available  | 
yes | 
Blind Transfer
| Tested feature | Result | 
|---|---|
| Device can transfer call | yes | 
| Holding end hears dialing tone | no instead one beep tone and information on display that call is on hold | 
Broadcast Group & Waiting Queue
tested also when the nokia phone is part of broadcast & waiting queue
| Tested feature | Result | 
|---|---|
| Caller can make a call to a broadcast group | yes (also when nokia phone is part of) | 
| Caller can make a call to a waiting Queue | yes (also when nokia phone is part of) | 
| Announcement if nobody picks up the call | yes ( only with same codec) | 
Calling Party Number
| Tested feature | Result | 
|---|---|
| CGPN is displayed correctly | yes | 
| CGPN can be supressed | via pbx - send number changes the cgpn | 
Additional Info
To check your latest software version press *#0000# on your nokia phone and go to http://europe.nokia.com/A4577224