Howto:VoIP-Telecom - SIP Provider Compatibility Test: Difference between revisions
(New page: {{Template:3rd Party Input}}'''ITM/innovaphone Compatibility Test Report''' == Summary == '''SIP Provider: HL komm''' The provider supports all required innovaphone features and is ther...) |
No edit summary |
||
Line 3: | Line 3: | ||
== Summary == | == Summary == | ||
'''SIP Provider: | '''SIP Provider: VoIP-Telecom''' | ||
The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]]. | The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]]. |
Revision as of 17:20, 18 July 2011
ITM/innovaphone Compatibility Test Report
Summary
SIP Provider: VoIP-Telecom
The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.
...
That beeing said, the provider has achieved x% of all possible test points. For more information on the test rating, please refer to Test Description
- Features:
- Direct Dial In
- Fax over IP (T.38)
- DTMF
- Supported Codecs by the provider
- G711
- G729
- G723
- G726
- T.38 UDP
Current test state
This product is being tested right now. The test is not yet completed.
Testing Enviroment
Scenario NAT
This scenario describes a setup where the PBX and phones are in a private network. The IP800 must use a stun server, in order to send correct SIP - messages. The IP800 works as media relay, all RTP - streams go through the PBX.
Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.
Basic Call
Tested feature | Result |
---|---|
call using g711a | |
call using g711u | |
call using g723 | |
call using g729 | |
Overlapped sending | |
early media channel | |
Fax using T.38 | |
CGPN can be supressed | |
CLIP no screening | |
Long time call possible(>30 min) | |
Voice Quality OK? |
Direct Dial In
Tested feature | Result |
---|---|
Inbound(Provider -> Innovaphone) | |
Outbound(Innovaphone -> Provider) |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | |
DTMF tones received correctly |
Hold/Retrieve
Tested feature | Result |
---|---|
Call can be put on hold | |
Held end hears music on hold / announcement from PBX | |
Held end hears music on hold / announcement from provider |
Transfer with consultation
Tested feature | Result |
---|---|
Call can be transfered | |
Held end hears music on hold | |
Call returns to transferring device if the third
Endpoint is not available |
Transfer with consultation (alerting only)
Tested feature | Result |
---|---|
Call can be transfered | |
Held end hears music on hold or dialing tone | |
Call returns to transferring device if the third
Endpoint is not available |
Blind Transfer
Tested feature | Result |
---|---|
Call can be transfered | |
Held end hears dialing tone |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
Caller can make a call to a Broadcast Group | |
Caller can make a call to a Waiting Queue | |
Announcement if nobody picks up the call |
Configuration
Firmware version
All innovaphone devices use Vx build xx-xxxxx as firmware.