Howto:Feature List in English: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
Line 6: Line 6:
This information applies to
This information applies to


−       All innovaphone products based on V7, V8 and V9
*       All innovaphone products based on V7, V8, V9 and V10
 


<!--
==Download==
==Download==


[[Media:innovaphone_V9_Featureliste_en.pdf]]
[[Media:innovaphone_V9_Featureliste_en.pdf]]
-->


==More information==
==More information==


=== PBX System Features ===
=== PBX System Features ===


Access to exchange via group number  
* Access to exchange via group number  
 
* Access to separate exchange via individual number  
Access to separate exchange via individual number  
* ACD groups  
 
* Active Directory Replication  
ACD groups  
* Administration via uniform interface  
 
* Alarm and error events  
Active Directory Replication  
* Alternate route selection  
 
* Announcement before pickup (*)  
Administration via uniform interface  
* Announcements (*)  
 
* Authorisation groups (class of service)  
Alarm and error events  
* Automatic break through for call protection for preferred numbers  
 
* Automatic call distribution (ACD)  
Alternate route selection  
* Automatic night switching with week clock  
 
* Automatic route selection (ARS)  
Announcement before pickup (*)  
* Bootcode with minifirmware (not supported with IP3000)  
 
* Branches (virtual central PBX)  
Announcements (*)  
* Bunched circuit  
 
* Call back  
Authorisation groups (class of service)  
* Call back also if internal call  
 
* Call detail records (CDR)  
Automatic break through for call protection for preferred numbers  
* Calling line identification restriction (CLIR)  
 
* Calling party identification (CLIP)  
Automatic call distribution (ACD)  
* Calling to E.164  
 
* Calling via ENUM (H.323 and SIP)  
Automatic night switching with week clock  
* centralized backup /firmware/config upload
 
* Circle call with circle call query (#)  
Automatic route selection (ARS)  
* Clock synchronization via IP  
 
* Config templates for PBX User  
Bootcode with minifirmware (not supported with IP3000)  
* Configurable tones  
 
* Configure / change / delete call diversion via web  
Branches (virtual central PBX)  
* Conversation return to operator  
 
* Cross connection via IP  
Bunched circuit  
* Cross connection via ISDN  
 
* Different call (external, internal)  
Call back  
* Direct dial (with and without number reassessment)  
 
* Door bell interface with door opener function (#)  
Call back also if internal call  
* DTMF detection disabling  
 
* DTMF-post dial/direct dial  
Call detail records (CDR)  
* Emigration of endpoint  
 
* Enhanced error reporting (SIP, QOS parameter, router error reporting)
Calling line identification restriction (CLIR)  
* Enhanced H.323 features according to H.450.x  
 
* Extended DTMF Object (feature set via DTMF dial)  
Calling party identification (CLIP)  
* External communication  
 
* Firmware upload in DRAM (not supported with IP3000)  
Calling to E.164  
* Floating license model  
 
* Flexible dial plan  
Calling via ENUM (H.323 and SIP)  
* General night switching  
 
* Group call (all, circular)
centralized backup /firmware/config upload
* Hide Objects from LDAP
 
* Home office integration  
Circle call with circle call query (#)  
* HTTP/ HTTPS allowed stations
 
* Incoming direct call to subscriber or group  
Clock synchronization via IP  
* Interactive call acceptance (*)  
 
* Interface for external announcement construction (#)  
Config templates for PBX User  
* Internal communication  
 
* Internal music on hold  
Configurable tones  
* Least cost routing (LCR)  
 
* Log forwarding
Configure / change / delete call diversion via web  
* LDAP replication
 
* Message center (H.450.7 or DTMF)  
Conversation return to operator  
* Message Waiting Indication (MWI)  
 
* Messaging (SIP and H.323)  
Cross connection via IP  
* Mixed dial method (overlap and en-block dialing)  
 
* MS-chap V1/V2  
Cross connection via ISDN  
* Multi conferencing (IP800, IP6000, IP0010, IP1060, IP3010, IP6010)  
 
* Multi protocol (H.323, SIP)  
Different call (external, internal)  
* Multilevel admin access (detailed multilevel user rights for the PBX configuration)  
 
* Multiple system admin (multiple admin and viewer rights possible for the whole system)  
Direct dial (with and without number reassessment)  
* Multistage login (multi-user)  
 
* Music / announcement in standby from analogue resource (#)  
Door bell interface with door opener function (#)  
* Music / announcement in standby from HTTP resource (*)  
 
* Network wide features (Master/slave with virtual PBX)  
DTMF detection disabling  
* Only calling to registered subscribers (passive control)  
 
* Overflow of subscribers and cross connection  
DTMF-post dial/direct dial  
* Overlapped sending  
 
* PBX directory search (LDAP search via DTMF)  
Emigration of endpoint  
* Phonebook either from internal or from external source (LDAP)  
 
* QSIG  
Enhanced error reporting (SIP, QOS parameter, router error reporting)
* QSIG inter-working  
 
* QSIG trunking (point to point and point to multipoint)  
Enhanced H.323 features according to H.450.x  
* Redundancy of the ISDN-lines  
 
* Redundancy of the PBX  
Extended DTMF Object (feature set via DTMF dial)  
* Remote monitoring and remote diagnostics  
 
* Remote software upgrade  
External communication  
* RTP Proxy  
 
* SDP Transit (for video and other codecs)  
Firmware upload in DRAM (not supported with IP3000)  
* Short dial (individual, group, system wide)  
 
* Silent intrusion  
Floating license model  
* SIP/H.323 Media Relay (RTP stream routing via gateway)  
 
* SIP trunking  
Flexible dial plan  
* SIP via TCP
 
* SIPS (SIP-Secure) – SIP via TCP/TLS (not supported with IP3000)  
General night switching  
* SNMP Traps (alarm events)  
 
* SOAP-API  
Group call (all, circular)
* SRTP (Voice encryption) for H.323 and SIP (not supported with IP3000)  
 
* Subscriber authorisation
Hide Objects from LDAP
* Standard protocols to the endpoint  
 
* Subscriber groups with progressive call (parallel, circular, sequential)
Home office integration  
* Switch between day/night with code digit from subscribers  
 
* System time/date via timeserver (LAN or web)  
HTTP/ HTTPS allowed stations
* TAPI / Multi line TAPI (via several PBX’s / locations)
 
* Telephone number assignment  
Incoming direct call to subscriber or group  
* Time based subscriber authorisation
 
* Twin Phones  
Interactive call acceptance (*)  
* US standard (T1 and CAS)  
 
* VoIP-CAPI
Interface for external announcement construction (#)  
* Waiting queue – call busy operators / CFU disable operators  
 
* 802.1x
Internal communication  
* Active Directory Replication/More detail information in error situations
 
Internal music on hold  
 
Least cost routing (LCR)  
 
Log forwarding
 
LDAP replication
 
Message center (H.450.7 or DTMF)  
 
Message Waiting Indication (MWI)  
 
Messaging (SIP and H.323)  
 
Mixed dial method (overlap and en-block dialing)  
 
MS-chap V1/V2  
 
Multi conferencing (IP800, IP6000, IP0010, IP1060, IP3010, IP6010)  
 
Multi protocol (H.323, SIP)  
 
Multilevel admin access (detailed multilevel user rights for the PBX configuration)  
 
Multiple system admin (multiple admin and viewer rights possible for the whole system)  
 
Multistage login (multi-user)  
 
Music / announcement in standby from analogue resource (#)  
 
Music / announcement in standby from HTTP resource (*)  
 
Network wide features (Master/slave with virtual PBX)  
 
Only calling to registered subscribers (passive control)  
 
Overflow of subscribers and cross connection  
 
Overlapped sending  
 
PBX directory search (LDAP search via DTMF)  
 
Phonebook either from internal or from external source (LDAP)  
 
QSIG  
 
QSIG inter-working  
 
QSIG trunking (point to point and point to multipoint)  
 
Redundancy of the ISDN-lines  
 
Redundancy of the PBX  
 
Remote monitoring and remote diagnostics  
 
Remote software upgrade  
 
RTP Proxy  
 
SDP Transit (for video and other codecs)  
 
Short dial (individual, group, system wide)  
 
Silent intrusion  
 
SIP/H.323 Media Relay (RTP stream routing via gateway)  
 
SIP trunking  
 
SIP via TCP
 
SIPS (SIP-Secure) – SIP via TCP/TLS (not supported with IP3000)  
 
SNMP Traps (alarm events)  
 
SOAP-API  
 
SRTP (Voice encryption) for H.323 and SIP (not supported with IP3000)  
 
Subscriber authorisation
 
Standard protocols to the endpoint  
 
Subscriber groups with progressive call (parallel, circular, sequential)
 
Switch between day/night with code digit from subscribers  
 
System time/date via timeserver (LAN or web)  
 
TAPI / Multi line TAPI (via several PBX’s / locations)
 
Telephone number assignment  
 
Time based subscriber authorisation
 
Twin Phones  
 
US standard (T1 and CAS)  
 
VoIP-CAPI
 
Waiting queue – call busy operators / CFU disable operators  
 
802.1x
 
Active Directory Replication/More detail information in error situations


==== New in V8 ====
==== New in V8 ====
* Announcing the queue position in a waiting queue
* Call completion on busy/free to ISDN
* Customized Visual Appearance (individually designable user interface)
* Dual Forking (OCS compatible)
* Dynamic PBX (more PBXs on one Device ) PBX hosting / PBX virtualization
* Kerberos based authentication and Cross Realm authentication
* Mobility (GSM integration)
** Call-waiting
** hold
** transfer
** park
** group login/logout
** mobility on/off
** setting presence status


Announcing the queue position in a waiting queue
* Off load Dialtone (external gateway)
 
* Off load Media Relay (external gateway)  
Call completion on busy/free to ISDN
* Off load MOH (external gateway)
 
* Presence  
Customized Visual Appearance (individually designable user interface)
* Recording at the ISDN and analogue interfaces  
 
* Roaming Phone Profiles  
Dual Forking (OCS compatible)
* RSTP (Rapid Spanning Tree)  
 
* Send Message to group  
Dynamic PBX (more PBXs on one Device ) PBX hosting / PBX virtualization
* SIP error detection (alarm/event updated)  
 
* SIP Federation  
Kerberos based authentication and Cross Realm authentication
* SIP video multisite support
 
Mobility (GSM integration)
- Call-waiting
- hold
- transfer
- park
- group login/logout
- mobility on/off
- setting presence status
 
Off load Dialtone (external gateway)
 
Off load Media Relay (external gateway)  
 
Off load MOH (external gateway)
 
Presence  
 
Recording at the ISDN and analogue interfaces  
 
Roaming Phone Profiles  
 
RSTP (Rapid Spanning Tree)  
 
Send Message to group  
 
SIP error detection (alarm/event updated)  
 
SIP Federation  
 
SIP video multisite support


====New in V9====
====New in V9====
* Executive/secretary enhancements
** Secretary can initiate calls with the CLIP from the executive.
** Executive can see if the secretary is joined or unjoined in the primary secretary group.
** Executive sees if a call diversion is set at the secretary.
** Breakthrough disabled call waiting at secretary.


Executive/secretary enhancements
* Reporting
** Based on internal or external Linux Application Platform
** Based on PBX CDR´s
** Predefined filter
** Reports (export as PDF, XML) from filter, combined filter, date and time


* Secretary can initiate calls with the CLIP from the executive.
* Emergency calls priority
* Import/Export PBX user database (CSV/XML)
* Individual MOH (context sensitive based on object, node or PBX)
* IP filter for registrations with or without password
* IPv6 support (IPv6 routing, 6to4 routing and http access, telnet)
* LDAP via TLS
* MTLS
* NTP redundancy
* Partnerkeys via separate Pbx´s
* Wideband audio
* Enhanced Boolean (call forward, filter and diversion filter) based also on date
* Maximum call duration


* Executive can see if the secretary is joined or unjoined in the primary secretary group.
==== New in V10 ====
* Show video calls on page PBX/Calls
* Show video capability of registrations on page PBX/Registrations
* Tone type for PBX generated tones (e.g. for Mobility) configurable
* Explicit assignement of licenses to users
* Server based myPBX call lists included with myPBX licenses at no extra charge
* per user Voicemail license scheme
* Support for cloud setup
* Ability to correct calendar-driven presence information manually
* 'do-not-disturb' presence
* Support for Mobility client using data for call-control features (hold, retrieve etc.)
* configurable default visibility (presence/dialog) for group members
* Disconnect other ringing endpoints if call is rejected on one in a twein-phone configurstion
* Broadcast Conference object supports chat conferences
* Offload-able media interface for voicemail (Hosting)
* Waiting Queue supports mobile operators
* Conditional Mobility/Forking (via ''Boolean'' object)
* Kerberos with AES (Windows 2008R2 compatibility)


* Executive sees if a call diversion is set at the secretary.
* Breakthrough disabled call waiting at secretary.
Reporting
* Based on internal or external Linux Application Platform
* Based on PBX CDR´s
* Predefined filter
* Reports (export as PDF, XML) from filter, combined filter, date and time
UC client (myPBX) web-based and Windows launcher
''Languages supported: Danish / English / Estonian / Finnish / French / Italian / Latvian / Dutch /  Norwegian / Polish /  Portuguese / Spanish / Swedish / Czech – additional languages on demand.''
* CTI (initiate call, accept call, terminate call, hold call, retrieve call, transfer call, park call, 3PTY conference)
* Manage own call diversions
* Call list
* Presence (manage own presence state)
* Buddylist (including partners presence and call status)
* Chat (multiparty chat)
* Audioconference (via innovaphone audio conference Interface)
* Videoconferece (via integration of  Webex or Microsoft Livemeeting)
* Application sharing (via integration of Webex or Microsoft Livemeeting)
Emergency calls priority
Import/Export PBX user database (CSV/XML)
Individual MOH (context sensitive based on object, node or PBX)
IP filter for registrations with or without password
IPv6 support (IPv6 routing, 6to4 routing and http access, telnet)
LDAP via TLS
MTLS
NTP redundancy
Partnerkeys via separate Pbx´s
Wideband audio
Enhanced Boolean (call forward, filter and diversion filter) based also on date
Maximum call duration


===Features IP Phones – IP110 / IP200 / IP230 / IP240 / IP240-1000 / IP241 / IP222 / IP232===
===Features IP Phones – IP110 / IP200 / IP230 / IP240 / IP240-1000 / IP241 / IP222 / IP232===
 
* Adjustable loudness  
Adjustable loudness  
* Adjustable ringing tones also possible, import RTTTL and midi files  
 
* Alphanumeric phonebook  
Adjustable ringing tones also possible, import RTTTL and midi files  
* Announcement via loudspeaker  
 
* Automatic callback on busy and free  
Alphanumeric phonebook  
* Automatic redialing  
 
* Automatic redialing to busy bunched circuit  
Announcement via loudspeaker  
* Blind transfer  
 
* Call diversion to internal phone number  
Automatic callback on busy and free  
* Call hold / retrieve call diversion to external phone number  
 
* Call intrusion  
Automatic redialing  
* Call list (outgoing, incoming, combined, not reached, not answered)
 
* Call park and enquiry from other subscribers  
Automatic redialing to busy bunched circuit  
* Call prevention  
 
* Call transfer / pickup (selective and from a group)
Blind transfer  
* Call waiting (acoustical and optical signaling of waiting calls)
 
* Caller identification (name/number)  
Call diversion to internal phone number  
* Changeover of the assigned partners  
 
* Conference (3 way)  
Call hold / retrieve call diversion to external phone number  
* Configuration of the voice recording via HTTP
 
* Connect to busy and free subscribers without notification  
Call intrusion  
* Counter and list of missed calls  
 
* Date and time display (automatic summer/winter time adjustment)  
Call list (outgoing, incoming, combined, not reached, not answered)
* Delete call back  
 
* Delete variable call diversion  
Call park and enquiry from other subscribers  
* Dialing an IP address (with and without RAS)  
 
* Dialing with code key from an unauthorized phone  
Call prevention  
* Direct dialing (immediate, internal/external)
 
* Display duration of call  
Call transfer / pickup (selective and from a group)
* Display calling number  
 
* Emigration of subscriber/endpoint  
Call waiting (acoustical and optical signaling of waiting calls)
* Fixed call diversion (unconditional, no answer (time adjustable) on busy)
 
* Forced announcement (priority call)  
Caller identification (name/number)  
* Function keys – multitude possible – exact list can be found in the technical specification of each IP phone  
 
* Hands free  
Changeover of the assigned partners  
* Headset  
 
* Individual configuration  
Conference (3 way)  
* Individual phonebook  
 
* Intercom with automatic call pick up  
Configuration of the voice recording via HTTP
* Interlinked and limitless multiple conference  
 
* Manager/assistant feature  
Connect to busy and free subscribers without notification  
* Message waiting indication (MWI)  
 
* Messaging  
Counter and list of missed calls  
* Multi language  
 
* Multi-protocol and multi-registration (SIP and H.323 concurrent)
Date and time display (automatic summer/winter time adjustment)  
* Multiple registrations with selective de-registration  
 
* Mute (switch off the microphone)  
Delete call back  
* Name dialing  
 
* Open listening  
Delete variable call diversion  
* Over plugging (connect call to a busy subscriber)  
 
* Phone lock  
Dialing an IP address (with and without RAS)  
* Preferred subscribers  
 
* Project code  
Dialing with code key from an unauthorized phone  
* Redialing of the last 100 dialed numbers  
 
* Silent Intrusion  
Direct dialing (immediate, internal/external)
* SIP via TCP  
 
* SIPS (Secure SIP via TCP/TLS)  
Display duration of call  
* SRTP (SIP and H.323)  
 
* Status indication of the subscriber (free/busy/call)  
Display calling number  
* Subscriber with several lines  
 
* Subscriber with several numbers  
Emigration of subscriber/endpoint  
* Transfer with consultation  
 
* Variable call diversion  
Fixed call diversion (unconditional, no answer (time adjustable) on busy)
* 802.1x
 
Forced announcement (priority call)  
 
Function keys – multitude possible – exact list can be found in the technical specification of each IP phone  
 
Hands free  
 
Headset  
 
Individual configuration  
 
Individual phonebook  
 
Intercom with automatic call pick up  
 
Interlinked and limitless multiple conference  
 
Manager/assistant feature  
 
Message waiting indication (MWI)  
 
Messaging  
 
Multi language  
 
Multi-protocol and multi-registration (SIP and H.323 concurrent)
 
Multiple registrations with selective de-registration  
 
Mute (switch off the microphone)  
 
Name dialing  
 
Open listening  
 
Over plugging (connect call to a busy subscriber)  
 
Phone lock  
 
Preferred subscribers  
 
Project code  
 
Redialing of the last 100 dialed numbers  
 
Silent Intrusion  
 
SIP via TCP  
 
SIPS (Secure SIP via TCP/TLS)  
 
SRTP (SIP and H.323)  
 
Status indication of the subscriber (free/busy/call)  
 
Subscriber with several lines  
 
Subscriber with several numbers  
 
Transfer with consultation  
 
Variable call diversion  
 
802.1x


==== New in V9 ====
==== New in V9 ====
* Colour display (IP241 / IP222 / IP232)
* Individual background picture (IP241 / IP222 / IP232)
* Individual audible signal for announcement calls /multicast announcements and messaging
* 802.3az (IP222 / IP232)
* Wideband audio (IP222 / IP232)


Colour display (IP241 / IP222 / IP232)
==== New in V10 ====
 
* Russian and Slovenian languages
Individual background picture (IP241 / IP222 / IP232)
 
Individual audible signal for announcement calls /multicast announcements and messaging
 
802.3az (IP222 / IP232)
 
Wideband audio (IP222 / IP232)


===Features 3rd party Phones connected to analogue (POTS) port, DECT Phones IP52 / IP54 / IP55 / IP61 / IP63 / IP65 ===
===Features 3rd party Phones connected to analogue (POTS) port, DECT Phones IP52 / IP54 / IP55 / IP61 / IP63 / IP65 ===
* Call completion on busy
* Call completion on free
* Call diversion to internal/external number
* Call hold/retrieve
* Call park and enquiry from other subscribers
* Call protection
* Call transfer/pickup (selective and from a group)
* Call waiting (acoustic signalling of the waiting call)
* Clip to an analogue phone
* Confirmation tone (positive and negative)
* Connect to a free and busy subscriber without notification
* Delete variable call diversion
* Dial with code key from an unauthorized phone
* Direct dial immediate (internal, external)
* Do not disturb (internal and external calls)
* Fixed call diversion; unconditional, no answer (time adjustable), on busy
* Lock phone
* Message Waiting Indication (MWI) on DECT Phones
* Preferred subscriber
* Project code
* Special tone when active feature
* Transfer with consultation


Call completion on busy
==== New in V10 ====
 
* DECT: pass the DECT Security certification
Call completion on free
 
Call diversion to internal/external number
 
Call hold/retrieve
 
Call park and enquiry from other subscribers
 
Call protection
 
Call transfer/pickup (selective and from a group)
 
Call waiting (acoustic signalling of the waiting call)
 
Clip to an analogue phone
 
Confirmation tone (positive and negative)
 
Connect to a free and busy subscriber without notification
 
Delete variable call diversion
 
Dial with code key from an unauthorized phone
 
Direct dial immediate (internal, external)
 
Do not disturb (internal and external calls)
 
Fixed call diversion; unconditional, no answer (time adjustable), on busy
 
Lock phone
 
Message Waiting Indication (MWI) on DECT Phones
 
Preferred subscriber
 
Project code
 
Special tone when active feature
 
Transfer with consultation


===Features innovaphone Voice mail (*)===
===Features innovaphone Voice mail (*)===
* ''Languages supported: German / English / Italian / French / Dutch / Spanish / Norwegian / Danish / Polish /Swedish / Czech  – additional languages on demand.''
* ''Voicemail runs on Compact Flash (CF slot in IP800, IP305, IP302, IP2000, IP6000, IP1060, IP3010, IP6010) or on external Web Server''
* Email notification (with or without attachment)
* Listen to/delete /store voice mails by means of DTMF input
* MWI (according to H.450.7)
* Personal greeting message
* Voice recording


''Languages supported: German / English / Italian / French / Dutch / Spanish / Norwegian / Danish / Polish /Swedish / Czech  – additional languages on demand.''
==== New in V9 ====
''Voicemail runs on Compact Flash (CF slot in IP800, IP305, IP302, IP2000, IP6000, IP1060, IP3010, IP6010) or on external Web Server''
* Voicemail support SRTP


Email notification (with or without attachment)  
=== Features myPBX ===
UC client (myPBX) web-based and Windows launcher
* ''Languages supported: Danish / English / Estonian / Finnish / French / Italian / Latvian / Dutch /  Norwegian / Polish /  Portuguese / Spanish / Swedish / Czech – additional languages on demand.''
** CTI (initiate call, accept call, terminate call, hold call, retrieve call, transfer call, park call, 3PTY conference)
** Manage own call diversions
** Call list
** Presence (manage own presence state)
** Buddylist (including partners presence and call status)
** Chat (multiparty chat)
** Audioconference (via innovaphone audio conference Interface)
** Videoconferece (via integration of  Webex or Microsoft Livemeeting)
** Application sharing (via integration of Webex or Microsoft Livemeeting)


Listen to/delete /store voice mails by means of DTMF input
==== New in V10 ====
* Improved usability, new look, single-window design
* Intuitive LDAP search (arbitrary search string input, results from different sources are merged)
* Possibility to display additional info from the directory in the LDAP search
* Support for LDAPS (LDAP over TLS)
* Improved instant messaging (subject, list of participants, messages are received before the chat is accepted, window can be closed and opened again without terminating the session)
* Simplified call diversion configuration (synchonized with the favourite call diversions on the phone)
* Simplified visibility settings
* Do not disturb (new presence activity, chats are rejected if DND is set)
* Pickup calls from favourites
* Unpark calls from favourites
* Unlimited length of call list (using a paging mechanism).
* Configure language in launcher
* Translated launcher user interface
* Auto appear offline, after an idle timeout that can be configured in the launcher
* MSI-Parameters for deployment of the launcher
* Launcher can dock to the left or right screen border
* Launcher can write trace files for debugging purposes and support
* Audio conferencing from the chat window has been removed
* Desktop notifications and notification sounds for calls and instant messaging. Accept and reject calls directly from the notification window. Visibility requests using desktop notifications.
* Configure mobility
* Tool that dials or starts chats in myPBX. This tool is registered in windows as an handler for tel: sip: and im: URIs.
* Display diverting info at incoming alerting calls
* Display causes at disconnecting calls
*Video calls between two myPBX Launchers is now possible (runs on Windows 7 and Windows 8, see [[Reference10:Concept myPBX Video]] for details)
*3 party Video conference
*Webcam selection if several webcams present
*Webcam preview of the selected webcam
*Webcam menu to control settings like brightness or contrast. Adjustable at webcam preview or even during the video call
*Webcam is configured to deliver 352x288 or 320x240 resolutions and the maximun frame rate available, usually 30 fps
*H264 encoder configured to deliver an average rate of 250 kbps
*H264 video stream compatible with other vendors like LifeSize or Polycom


MWI (according to H.450.7)
=== Microsoft Office 2010/2013 integration (introduced in V10) ===
allows to see the presence of a user inside a Microsoft Office 2010 application
* Presence visibility inside an Office application
* Start of a chat from inside an Office application
* Start of a call from inside an Office application


Personal greeting message
=== Exchange Calender Connector (introduced in V10) ===
Replicates Exchange Calendar information to PBX user presence
(Linux Application Platform)
* Presence is set to busy during calendar appointments
* The appointment subject is provided as presence note
* later appointments the same day are indicated as presence note, if presence is 'available'


Voice recording
=== Fax Server (introduced in V10)===
(Linux Application Platform)
* email-to-fax and fax-to-email gateway
* Each PBX user has an own fax number: personal fax
* Fax source formats
** plain text
** HTML
** PDF files
** all other file formats which can be converted by OpenOffice
* Cover page
* e-mail delivery/non-delivery report
* Incoming fax documents delivered as PDF


==== New in V9 ====
Voicemail support SRTP


===Features Operator (V8) software based===
===Features Operator (V8) software based===
 
* ''Localized versions: German / English / Italian / Dutch – additional languages on demand''
''Localized versions: German / English / Italian / Dutch – additional languages on demand''
* Busylampfield (divided into groups)  
 
* Call journal  
Busylampfield (divided into groups)  
* Call transfer (with/without consultation (blind))  
 
* Drag&Drop or with keypad use  
Call journal  
* Integrated help  
 
* Monitor blind transferred calls  
Call transfer (with/without consultation (blind))  
* Monitor of waiting queue  
 
* Name display for incoming calls in LDAP directory  
Drag&Drop or with keypad use  
* Park/unpark  
 
* Send messages to PBX users  
Integrated help  
* Searching within a LDAP directory  
 
* Searching for PBX users in all PBX´s  
Monitor blind transferred calls  
* Set/change call forward for all PBX users  
 
* Set/change presence status for all PBX users  
Monitor of waiting queue  
* Show busy state  
 
* Show call forward  
Name display for incoming calls in LDAP directory  
* Show current call
 
* Show presence status  
Park/unpark  
* State-of-the-art user interface  
 
* Support of Master/Slave scenarios
Send messages to PBX users  
 
Searching within a LDAP directory  
 
Searching for PBX users in all PBX´s  
 
Set/change call forward for all PBX users  
 
Set/change presence status for all PBX users  
 
Show busy state  
 
Show call forward  
 
Show current call
 
Show presence status  
 
State-of-the-art user interface  
 
Support of Master/Slave scenarios
 
 


===Features Interactive Voice Response (IVR) (*)===
===Features Interactive Voice Response (IVR) (*)===
 
* Call handling according to lines and/or calling number (CLI)
Announcements depending on the caller (e.g. automatic or manual language selection)
* Listen to the menu also from internal subscribers  
 
* Multi level menu  
Call handling according to lines and/or calling number (CLI)
* Overflow from the operator to an automatic operator  
 
* Voice menu at extension (if no answer, busy, unconditional)  
Listen to the menu also from internal subscribers  
* Voice menu with information and automatic dialing  
 
* Voice menu with predefined destinations  
Multi level menu  
* Voice menu with manual dialing of the destination (DTMF)  
 
Overflow from the operator to an automatic operator  
 
Voice menu at extension (if no answer, busy, unconditional)  
 
Voice menu with information and automatic dialing  
 
Voice menu with predefined destinations  
 
Voice menu with manual dialing of the destination (DTMF)  
 


==== New in V8====
==== New in V8====
* Announcing the queue position in a waiting queue


Announcing the queue position in a waiting queue
* Note:  
 
* (*) External or internal (CF-card) web server required
 
* (#) innovaphone IP21 required  
 
 
Note:  
 
(*) External or internal (CF-card) web server required
 
(#) innovaphone IP21 required  
 
 


== Related Information ==
See the [http://www.innovaphone.com/en/services/downloads.html ''Downloads'' section on www.innovaphone.com] for further information


[[Category:News|{{PAGENAME}}]]
[[Category:News|{{PAGENAME}}]]

Revision as of 17:16, 13 March 2014

innovaphone feature list

Applies to

This information applies to

  • All innovaphone products based on V7, V8, V9 and V10


More information

PBX System Features

  • Access to exchange via group number
  • Access to separate exchange via individual number
  • ACD groups
  • Active Directory Replication
  • Administration via uniform interface
  • Alarm and error events
  • Alternate route selection
  • Announcement before pickup (*)
  • Announcements (*)
  • Authorisation groups (class of service)
  • Automatic break through for call protection for preferred numbers
  • Automatic call distribution (ACD)
  • Automatic night switching with week clock
  • Automatic route selection (ARS)
  • Bootcode with minifirmware (not supported with IP3000)
  • Branches (virtual central PBX)
  • Bunched circuit
  • Call back
  • Call back also if internal call
  • Call detail records (CDR)
  • Calling line identification restriction (CLIR)
  • Calling party identification (CLIP)
  • Calling to E.164
  • Calling via ENUM (H.323 and SIP)
  • centralized backup /firmware/config upload
  • Circle call with circle call query (#)
  • Clock synchronization via IP
  • Config templates for PBX User
  • Configurable tones
  • Configure / change / delete call diversion via web
  • Conversation return to operator
  • Cross connection via IP
  • Cross connection via ISDN
  • Different call (external, internal)
  • Direct dial (with and without number reassessment)
  • Door bell interface with door opener function (#)
  • DTMF detection disabling
  • DTMF-post dial/direct dial
  • Emigration of endpoint
  • Enhanced error reporting (SIP, QOS parameter, router error reporting)
  • Enhanced H.323 features according to H.450.x
  • Extended DTMF Object (feature set via DTMF dial)
  • External communication
  • Firmware upload in DRAM (not supported with IP3000)
  • Floating license model
  • Flexible dial plan
  • General night switching
  • Group call (all, circular)
  • Hide Objects from LDAP
  • Home office integration
  • HTTP/ HTTPS allowed stations
  • Incoming direct call to subscriber or group
  • Interactive call acceptance (*)
  • Interface for external announcement construction (#)
  • Internal communication
  • Internal music on hold
  • Least cost routing (LCR)
  • Log forwarding
  • LDAP replication
  • Message center (H.450.7 or DTMF)
  • Message Waiting Indication (MWI)
  • Messaging (SIP and H.323)
  • Mixed dial method (overlap and en-block dialing)
  • MS-chap V1/V2
  • Multi conferencing (IP800, IP6000, IP0010, IP1060, IP3010, IP6010)
  • Multi protocol (H.323, SIP)
  • Multilevel admin access (detailed multilevel user rights for the PBX configuration)
  • Multiple system admin (multiple admin and viewer rights possible for the whole system)
  • Multistage login (multi-user)
  • Music / announcement in standby from analogue resource (#)
  • Music / announcement in standby from HTTP resource (*)
  • Network wide features (Master/slave with virtual PBX)
  • Only calling to registered subscribers (passive control)
  • Overflow of subscribers and cross connection
  • Overlapped sending
  • PBX directory search (LDAP search via DTMF)
  • Phonebook either from internal or from external source (LDAP)
  • QSIG
  • QSIG inter-working
  • QSIG trunking (point to point and point to multipoint)
  • Redundancy of the ISDN-lines
  • Redundancy of the PBX
  • Remote monitoring and remote diagnostics
  • Remote software upgrade
  • RTP Proxy
  • SDP Transit (for video and other codecs)
  • Short dial (individual, group, system wide)
  • Silent intrusion
  • SIP/H.323 Media Relay (RTP stream routing via gateway)
  • SIP trunking
  • SIP via TCP
  • SIPS (SIP-Secure) – SIP via TCP/TLS (not supported with IP3000)
  • SNMP Traps (alarm events)
  • SOAP-API
  • SRTP (Voice encryption) for H.323 and SIP (not supported with IP3000)
  • Subscriber authorisation
  • Standard protocols to the endpoint
  • Subscriber groups with progressive call (parallel, circular, sequential)
  • Switch between day/night with code digit from subscribers
  • System time/date via timeserver (LAN or web)
  • TAPI / Multi line TAPI (via several PBX’s / locations)
  • Telephone number assignment
  • Time based subscriber authorisation
  • Twin Phones
  • US standard (T1 and CAS)
  • VoIP-CAPI
  • Waiting queue – call busy operators / CFU disable operators
  • 802.1x
  • Active Directory Replication/More detail information in error situations

New in V8

  • Announcing the queue position in a waiting queue
  • Call completion on busy/free to ISDN
  • Customized Visual Appearance (individually designable user interface)
  • Dual Forking (OCS compatible)
  • Dynamic PBX (more PBXs on one Device ) PBX hosting / PBX virtualization
  • Kerberos based authentication and Cross Realm authentication
  • Mobility (GSM integration)
    • Call-waiting
    • hold
    • transfer
    • park
    • group login/logout
    • mobility on/off
    • setting presence status
  • Off load Dialtone (external gateway)
  • Off load Media Relay (external gateway)
  • Off load MOH (external gateway)
  • Presence
  • Recording at the ISDN and analogue interfaces
  • Roaming Phone Profiles
  • RSTP (Rapid Spanning Tree)
  • Send Message to group
  • SIP error detection (alarm/event updated)
  • SIP Federation
  • SIP video multisite support

New in V9

  • Executive/secretary enhancements
    • Secretary can initiate calls with the CLIP from the executive.
    • Executive can see if the secretary is joined or unjoined in the primary secretary group.
    • Executive sees if a call diversion is set at the secretary.
    • Breakthrough disabled call waiting at secretary.
  • Reporting
    • Based on internal or external Linux Application Platform
    • Based on PBX CDR´s
    • Predefined filter
    • Reports (export as PDF, XML) from filter, combined filter, date and time
  • Emergency calls priority
  • Import/Export PBX user database (CSV/XML)
  • Individual MOH (context sensitive based on object, node or PBX)
  • IP filter for registrations with or without password
  • IPv6 support (IPv6 routing, 6to4 routing and http access, telnet)
  • LDAP via TLS
  • MTLS
  • NTP redundancy
  • Partnerkeys via separate Pbx´s
  • Wideband audio
  • Enhanced Boolean (call forward, filter and diversion filter) based also on date
  • Maximum call duration

New in V10

  • Show video calls on page PBX/Calls
  • Show video capability of registrations on page PBX/Registrations
  • Tone type for PBX generated tones (e.g. for Mobility) configurable
  • Explicit assignement of licenses to users
  • Server based myPBX call lists included with myPBX licenses at no extra charge
  • per user Voicemail license scheme
  • Support for cloud setup
  • Ability to correct calendar-driven presence information manually
  • 'do-not-disturb' presence
  • Support for Mobility client using data for call-control features (hold, retrieve etc.)
  • configurable default visibility (presence/dialog) for group members
  • Disconnect other ringing endpoints if call is rejected on one in a twein-phone configurstion
  • Broadcast Conference object supports chat conferences
  • Offload-able media interface for voicemail (Hosting)
  • Waiting Queue supports mobile operators
  • Conditional Mobility/Forking (via Boolean object)
  • Kerberos with AES (Windows 2008R2 compatibility)


Features IP Phones – IP110 / IP200 / IP230 / IP240 / IP240-1000 / IP241 / IP222 / IP232

  • Adjustable loudness
  • Adjustable ringing tones also possible, import RTTTL and midi files
  • Alphanumeric phonebook
  • Announcement via loudspeaker
  • Automatic callback on busy and free
  • Automatic redialing
  • Automatic redialing to busy bunched circuit
  • Blind transfer
  • Call diversion to internal phone number
  • Call hold / retrieve call diversion to external phone number
  • Call intrusion
  • Call list (outgoing, incoming, combined, not reached, not answered)
  • Call park and enquiry from other subscribers
  • Call prevention
  • Call transfer / pickup (selective and from a group)
  • Call waiting (acoustical and optical signaling of waiting calls)
  • Caller identification (name/number)
  • Changeover of the assigned partners
  • Conference (3 way)
  • Configuration of the voice recording via HTTP
  • Connect to busy and free subscribers without notification
  • Counter and list of missed calls
  • Date and time display (automatic summer/winter time adjustment)
  • Delete call back
  • Delete variable call diversion
  • Dialing an IP address (with and without RAS)
  • Dialing with code key from an unauthorized phone
  • Direct dialing (immediate, internal/external)
  • Display duration of call
  • Display calling number
  • Emigration of subscriber/endpoint
  • Fixed call diversion (unconditional, no answer (time adjustable) on busy)
  • Forced announcement (priority call)
  • Function keys – multitude possible – exact list can be found in the technical specification of each IP phone
  • Hands free
  • Headset
  • Individual configuration
  • Individual phonebook
  • Intercom with automatic call pick up
  • Interlinked and limitless multiple conference
  • Manager/assistant feature
  • Message waiting indication (MWI)
  • Messaging
  • Multi language
  • Multi-protocol and multi-registration (SIP and H.323 concurrent)
  • Multiple registrations with selective de-registration
  • Mute (switch off the microphone)
  • Name dialing
  • Open listening
  • Over plugging (connect call to a busy subscriber)
  • Phone lock
  • Preferred subscribers
  • Project code
  • Redialing of the last 100 dialed numbers
  • Silent Intrusion
  • SIP via TCP
  • SIPS (Secure SIP via TCP/TLS)
  • SRTP (SIP and H.323)
  • Status indication of the subscriber (free/busy/call)
  • Subscriber with several lines
  • Subscriber with several numbers
  • Transfer with consultation
  • Variable call diversion
  • 802.1x

New in V9

  • Colour display (IP241 / IP222 / IP232)
  • Individual background picture (IP241 / IP222 / IP232)
  • Individual audible signal for announcement calls /multicast announcements and messaging
  • 802.3az (IP222 / IP232)
  • Wideband audio (IP222 / IP232)

New in V10

  • Russian and Slovenian languages

Features 3rd party Phones connected to analogue (POTS) port, DECT Phones IP52 / IP54 / IP55 / IP61 / IP63 / IP65

  • Call completion on busy
  • Call completion on free
  • Call diversion to internal/external number
  • Call hold/retrieve
  • Call park and enquiry from other subscribers
  • Call protection
  • Call transfer/pickup (selective and from a group)
  • Call waiting (acoustic signalling of the waiting call)
  • Clip to an analogue phone
  • Confirmation tone (positive and negative)
  • Connect to a free and busy subscriber without notification
  • Delete variable call diversion
  • Dial with code key from an unauthorized phone
  • Direct dial immediate (internal, external)
  • Do not disturb (internal and external calls)
  • Fixed call diversion; unconditional, no answer (time adjustable), on busy
  • Lock phone
  • Message Waiting Indication (MWI) on DECT Phones
  • Preferred subscriber
  • Project code
  • Special tone when active feature
  • Transfer with consultation

New in V10

  • DECT: pass the DECT Security certification

Features innovaphone Voice mail (*)

  • Languages supported: German / English / Italian / French / Dutch / Spanish / Norwegian / Danish / Polish /Swedish / Czech – additional languages on demand.
  • Voicemail runs on Compact Flash (CF slot in IP800, IP305, IP302, IP2000, IP6000, IP1060, IP3010, IP6010) or on external Web Server
  • Email notification (with or without attachment)
  • Listen to/delete /store voice mails by means of DTMF input
  • MWI (according to H.450.7)
  • Personal greeting message
  • Voice recording

New in V9

  • Voicemail support SRTP

Features myPBX

UC client (myPBX) web-based and Windows launcher

  • Languages supported: Danish / English / Estonian / Finnish / French / Italian / Latvian / Dutch / Norwegian / Polish / Portuguese / Spanish / Swedish / Czech – additional languages on demand.
    • CTI (initiate call, accept call, terminate call, hold call, retrieve call, transfer call, park call, 3PTY conference)
    • Manage own call diversions
    • Call list
    • Presence (manage own presence state)
    • Buddylist (including partners presence and call status)
    • Chat (multiparty chat)
    • Audioconference (via innovaphone audio conference Interface)
    • Videoconferece (via integration of Webex or Microsoft Livemeeting)
    • Application sharing (via integration of Webex or Microsoft Livemeeting)

New in V10

  • Improved usability, new look, single-window design
  • Intuitive LDAP search (arbitrary search string input, results from different sources are merged)
  • Possibility to display additional info from the directory in the LDAP search
  • Support for LDAPS (LDAP over TLS)
  • Improved instant messaging (subject, list of participants, messages are received before the chat is accepted, window can be closed and opened again without terminating the session)
  • Simplified call diversion configuration (synchonized with the favourite call diversions on the phone)
  • Simplified visibility settings
  • Do not disturb (new presence activity, chats are rejected if DND is set)
  • Pickup calls from favourites
  • Unpark calls from favourites
  • Unlimited length of call list (using a paging mechanism).
  • Configure language in launcher
  • Translated launcher user interface
  • Auto appear offline, after an idle timeout that can be configured in the launcher
  • MSI-Parameters for deployment of the launcher
  • Launcher can dock to the left or right screen border
  • Launcher can write trace files for debugging purposes and support
  • Audio conferencing from the chat window has been removed
  • Desktop notifications and notification sounds for calls and instant messaging. Accept and reject calls directly from the notification window. Visibility requests using desktop notifications.
  • Configure mobility
  • Tool that dials or starts chats in myPBX. This tool is registered in windows as an handler for tel: sip: and im: URIs.
  • Display diverting info at incoming alerting calls
  • Display causes at disconnecting calls
  • Video calls between two myPBX Launchers is now possible (runs on Windows 7 and Windows 8, see Reference10:Concept myPBX Video for details)
  • 3 party Video conference
  • Webcam selection if several webcams present
  • Webcam preview of the selected webcam
  • Webcam menu to control settings like brightness or contrast. Adjustable at webcam preview or even during the video call
  • Webcam is configured to deliver 352x288 or 320x240 resolutions and the maximun frame rate available, usually 30 fps
  • H264 encoder configured to deliver an average rate of 250 kbps
  • H264 video stream compatible with other vendors like LifeSize or Polycom

Microsoft Office 2010/2013 integration (introduced in V10)

allows to see the presence of a user inside a Microsoft Office 2010 application

  • Presence visibility inside an Office application
  • Start of a chat from inside an Office application
  • Start of a call from inside an Office application

Exchange Calender Connector (introduced in V10)

Replicates Exchange Calendar information to PBX user presence (Linux Application Platform)

  • Presence is set to busy during calendar appointments
  • The appointment subject is provided as presence note
  • later appointments the same day are indicated as presence note, if presence is 'available'

Fax Server (introduced in V10)

(Linux Application Platform)

  • email-to-fax and fax-to-email gateway
  • Each PBX user has an own fax number: personal fax
  • Fax source formats
    • plain text
    • HTML
    • PDF files
    • all other file formats which can be converted by OpenOffice
  • Cover page
  • e-mail delivery/non-delivery report
  • Incoming fax documents delivered as PDF


Features Operator (V8) software based

  • Localized versions: German / English / Italian / Dutch – additional languages on demand
  • Busylampfield (divided into groups)
  • Call journal
  • Call transfer (with/without consultation (blind))
  • Drag&Drop or with keypad use
  • Integrated help
  • Monitor blind transferred calls
  • Monitor of waiting queue
  • Name display for incoming calls in LDAP directory
  • Park/unpark
  • Send messages to PBX users
  • Searching within a LDAP directory
  • Searching for PBX users in all PBX´s
  • Set/change call forward for all PBX users
  • Set/change presence status for all PBX users
  • Show busy state
  • Show call forward
  • Show current call
  • Show presence status
  • State-of-the-art user interface
  • Support of Master/Slave scenarios

Features Interactive Voice Response (IVR) (*)

  • Call handling according to lines and/or calling number (CLI)
  • Listen to the menu also from internal subscribers
  • Multi level menu
  • Overflow from the operator to an automatic operator
  • Voice menu at extension (if no answer, busy, unconditional)
  • Voice menu with information and automatic dialing
  • Voice menu with predefined destinations
  • Voice menu with manual dialing of the destination (DTMF)

New in V8

  • Announcing the queue position in a waiting queue
  • Note:
  • (*) External or internal (CF-card) web server required
  • (#) innovaphone IP21 required

Related Information

See the Downloads section on www.innovaphone.com for further information

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Feature_List_in_English&oldid=32989"