Howto:Switzerland - Swisscom Enterprise SIP: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
Newer edit →
VisualWikitext
Tru (talk | contribs)
168 edits
New page: <!-- {{FIXME|reason=in progress}} --> <!-- this text is a comment that is not visible on normal view at the article. --> <!-- to create a new entry here, - fill in all sections marked a...
 
Tru (talk | contribs)
168 edits
No edit summary
Line 20: Line 20:
   If you have a dedicated product page (not a generic vendor page) in English, also put the link below
   If you have a dedicated product page (not a generic vendor page) in English, also put the link below
   -->
   -->
[https://www.swisscom.ch/de/business/kmu/festnetz/erweiterte-telefonie/business-connect.html '''Business Connect''']
[https://www.swisscom.ch/de/business/enterprise/angebot/wireline-networks-bundles/business-voice/sip-trunking.html '''Swisscom SIP Trunking''']


== Current test state ==
== Current test state ==
'''Important note:'''
The SIP provider test described in this article covers the product Swisscom Business Connect and was valid till 2015.
Currently (2016), Swisscom offers a new product called Swisscom Smart Business Connect.
In spite of the similar product name, prerequsities in terms of used hardware provided by Swisscom have changed.
innovaphone currently is in certification process for the new product.
<!--{{Template:Compat Status "planned"}} -->
<!-- {{Template:Compat Status "in progress"}} -->
<!-- {{Template:Compat_Status_"engineered_prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} -->
<!--{{Template:Compat_Status_"rec._prod."|certificate=EFON_ADAPT_SIP_Provider_-_product-cert.pdf}}-->
<!-- {{Template:Compat Status "tested"(sip provider)}} -->
<!-- {{Template:Compat Status "rejected"}} -->
<!-- {{Template:Compat_Status_"referral_prod."-no-certificate}} -->


{{Template:Compat Status "certified"|certificate=Swisscom_Business_Connect_-_SIP_Provider_-_product-cert.pdf}}
{{Template:Compat Status "certified"|certificate=Swisscom_Business_Connect_-_SIP_Provider_-_product-cert.pdf}}
Line 69: Line 51:
== Summary ==
== Summary ==


[https://www.swisscom.ch/de/business/kmu/festnetz/erweiterte-telefonie/business-connect.html '''SIP Provider: swisscom Business Connect''']
[https://www.swisscom.ch/de/business/enterprise/angebot/wireline-networks-bundles/business-voice/sip-trunking.html '''SIP Provider: swisscom Enterprise SIP''']


The provider supports all mandatory innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].
The provider supports all mandatory innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].
 
The test was made by the Provider and has passed all mandatory requirements
That being said, the provider has achieved 86,34% of all possible test points (139 of 161). For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description_v11#|Test Description V11 and later]]




'''Please Note, that some features are restricted or not supported by swisscom'''
'''Please Note, that some features are restricted or not supported by swisscom'''
* Fax over IP is on principle not supported by swisscom
* Geo Location support on emergency calls
** The T.38 feature is not available
* Modem Voice Band Data Mode (not tested)
** Fax via G.711 (T.38 to G.711 / Audio Fax support) is not supported by swisscom but should work in most scenarios. This Feature is not guaranteed!
* Only G.711a is supported, no other codecs are supported
* Overlapped Sending is not supported
* NAT Detection is not supported
* Redundancy Mechanism are not supported
* SIP over TCP is not supported
 
* Incoming Early Media Channel is not supported by default and must be requestet to swisscom.
* CLIP no screening does not work for "Trunk loop Connections". This means, if you dial out to the PSTN and back to your own Trunk Number, CLNS does not work.
 
 
'''swisscom doesn't support "Reverse Media negotiation". Because of this, "Media-Relay" and an "Exclusive Coder Setting" must be configured.''' In contrast to a SIP trunk which does not need Media-Relay, the transport of all RTP packets across the gateway will result in a higher CPU load.


In order to use some Features like[[Howto:How_does_CLIP_no_screening_work | Clip no screening]], some [[Howto:Swisscom_-_SIP_Trunk_-_SIP_Provider_Compatibility_Test#Configuration|configuration]] must be done.
In order to use some Features like[[Howto:How_does_CLIP_no_screening_work | Clip no screening]], some [[Howto:Swisscom_-_SIP_Trunk_-_SIP_Provider_Compatibility_Test#Configuration|configuration]] must be done.


Supported Features:
Supported Features:
* TBD
* Basic inbound and outbound calls
 
* Long duration calls
Supported Codecs:
* DTMF after call connect
* TBD
* DTMF before call connect
 
* Calls to busy subscriber
* Calls to early media phone
* International calls
* Calls to short numbers
* Calls with special arrangement (spoofing calling party number with +41800XXXXXX/+4179XXXXXXX)
* CLIP—Calling Line Identification Presentation
* CLIR—Calling Line Identification Restriction
* Attended call transfer
* Blind call transfer
* CFU—Call Forwarding Unconditional
* CFB—Call Forwarding Busy
* CFNA—Call Forwarding No Answer
* Call hold and resume
* Conference call
* Inbound/outbound FAX with T.38
* Inbound/outbound FAX with G.711 Pass-through


[[Howto:Swisscom_Business_Connect_-_SIP_Trunk_-_SIP_Provider_Compatibility_Test | swisscom Test-report]]
[[Howto:Swisscom_Business_Connect_-_SIP_Trunk_-_SIP_Provider_Compatibility_Test | swisscom Test-report]]

Revision as of 11:01, 9 August 2016

Product Name

Swisscom SIP Trunking

Current test state

The tests for this product have been completed and it has been approved as a recommended product (Certification document).

Testing of this product has been finalized February, 2015.

Category

All SIP Telephony Provider (i.e. Carrier)

Version

V11

Vendor

swisscom

Summary

SIP Provider: swisscom Enterprise SIP

The provider supports all mandatory innovaphone features and is therefore qualified as recommended SIP Provider. The test was made by the Provider and has passed all mandatory requirements


Please Note, that some features are restricted or not supported by swisscom

  • Geo Location support on emergency calls
  • Modem Voice Band Data Mode (not tested)

In order to use some Features like Clip no screening, some configuration must be done.

Supported Features:

  • Basic inbound and outbound calls
  • Long duration calls
  • DTMF after call connect
  • DTMF before call connect
  • Calls to busy subscriber
  • Calls to early media phone
  • International calls
  • Calls to short numbers
  • Calls with special arrangement (spoofing calling party number with +41800XXXXXX/+4179XXXXXXX)
  • CLIP—Calling Line Identification Presentation
  • CLIR—Calling Line Identification Restriction
  • Attended call transfer
  • Blind call transfer
  • CFU—Call Forwarding Unconditional
  • CFB—Call Forwarding Busy
  • CFNA—Call Forwarding No Answer
  • Call hold and resume
  • Conference call
  • Inbound/outbound FAX with T.38
  • Inbound/outbound FAX with G.711 Pass-through

swisscom Test-report

Contact

For further informations on this test, please contact swisscom.

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Switzerland_-_Swisscom_Enterprise_SIP&oldid=43581"