Reference14r1:Settings/Phone settings/Device settings: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
Line 21: Line 21:


'''Example to be used in Devices configuration/Expert configuration'''
'''Example to be used in Devices configuration/Expert configuration'''
:Use the check command as in the example below to prevent re-execution every 30 seconds
Use the check command as in the example below to prevent re-execution every 30 seconds
  #Use Check command to prevent execution loops
 
  # Use check command to prevent boot loops (after vars create a reset is needed)
  mod cmd UP1 check iresetn Energie-Saving
  mod cmd UP1 check iresetn Energie-Saving
   
   
Line 28: Line 29:
  vars create PHONE/LCD-IDLE-BACKLIGHT p 2
  vars create PHONE/LCD-IDLE-BACKLIGHT p 2
  vars create PHONE/ENERGY-SAVING-TIME p 22-07 ser
  vars create PHONE/ENERGY-SAVING-TIME p 22-07 ser
iresetn

Revision as of 11:59, 6 November 2024

Headset
Enable/Disable headset support
LCD light
Set current display brightness. 0 (off) - 15 (max). Default 8.
LCD light (idle state)
Display brightness applied 30s after last action. 0 (off) - 15 (max). Default 2.
To prevent display dimming, set LCD light and LCD light (idle state) to same level
Energy saving
Time frame in which the display is switched off instead of being dimmed if in idle state. Format <starthours>-<endhours> in 24h-notation with leading zeros. E.g. 17-09 turns off display between 17 o'clock (5pm) until 9 o'clock (9am). Default is 22-06.
To prevent switching off the display, set Energy saving to 00-00.

Configuration entries for automated deployment

LCD light
vars create PHONE/LCD-BACKLIGHT p 8
LCD light (idle state)
vars create PHONE/LCD-IDLE-BACKLIGHT p 2
Energy saving
vars create PHONE/ENERGY-SAVING-TIME p 22-06


Example to be used in Devices configuration/Expert configuration Use the check command as in the example below to prevent re-execution every 30 seconds

# Use check command to prevent boot loops (after vars create a reset is needed)
mod cmd UP1 check iresetn Energie-Saving

vars create PHONE/LCD-BACKLIGHT p 8
vars create PHONE/LCD-IDLE-BACKLIGHT p 2
vars create PHONE/ENERGY-SAVING-TIME p 22-07 ser
iresetn