Howto:DECT Device Localization

Applies To

This information applies to

• IP1202/1203, Firmware 10 and later

More Information

Problem Details

In some applications, localization of DECT devices is required to e.g. locate calling users in emergency situations etc.

Resolution

While there are several add-on solutions available to address this requirements, the IP1202/IP103 has some basic function on board which may help.

At a DECT master the URL GW-DECT/MASTER/mod_cmd.xml?cmd=endpoints can be used to retrieve a list of all known endpoints along with the radio they are currently associated with (in the ep/loc tag):

<endpoints>
  <ep ipei="110550651293" product-id="DH7-M" sw-version="4.3.2" oem="DH7-M / 4.3.2" num="569">
    <loc name="DECT Master">IP1203-5c-00-d5</loc>
  </ep>
  <ep ipei="110550409855" num="580"/>
  <ep ipei="110550593063" num="685"/>
  <ep ipei="131600698995" num="684"/>
  <ep ipei="110550583964" num="619"/>
  <ep ipei="131600169818" product-id="DH7-M" sw-version="4.3.2" oem="DH7-M / 4.3.2" num="630">
    <loc name="DECT EG Buero">IP1203-5c-25-52</loc>
  </ep>
  <ep ipei="131600246794" product-id="DH6" sw-version="4.3.2" oem="DH6 / 4.3.2" num="632">
    <loc name="DECT EG Buero">IP1203-5c-25-52</loc>
  </ep>
</endpoints>

The content of the <loc> tag contains the serial number of the base.

Related Articles

Reportedly, this function is supported by the Howto:MobiCall - newVoice - 3rd Party Product Alarm system/server solution.