Reference8:Administration/PBX/Objects/Edit Forks
Jump to navigation
Jump to search
With this page call forking can be configured for a user. This means a call for this user is not only sent to endpoints registered to the user object, but also to the forking destination (No/Name). If a mobility object is configured for the forking, the phone identified by the forking destination can use the mobility functions. A delay can be configured for the call to the mobile endpoint. This delay is not supported for normal call forking without mobility functions.
Properties of Mobility
For the function of the Mobility features a Mobility license must be installed.
Object | The Mobility Object (Long Name) must be set, if the mobile endpoint (GSM Phone) needs to use the mobility features . | |
Device | Optional, the Device name of the User can be configured here | |
Delay | A Delay in seconds can be configured to call the mobile endpoint | |
Disable | Disabling the Mobility features for the mobile device, this can also be en/disabled via DTMF featurecodes | |
Call-Waiting | Enable or disable call-waiting for the mobile endpoint, if a mobile endpoint is in a calla call waiting tone will be played from the PBX to the mobile endpoint via the RTP stream. | |
GSM-License | When using the innovaphone GSM client a GSM license is needed and need to be activated |