Howto:VoIP-Telecom - SIP Provider Compatibility Test
Voip-Telecom innovaphone Compatibility Test Report
Summary
SIP Provider: VoIP-Telecom
The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.
That beeing said, the provider has achieved 97,5% of all possible test points. For more information on the test rating, please refer to Test Description
The Provider have NAT Detection system so we don't need to use STUN Server to work with. It's advice to use media-relay to guarantee that there is no problem with media in some type of calls (like external transfers).
- Features:
- Direct Dial In
- Fax over IP (T.38)
- DTMF
- NAT Detection
- Suppress the Number if Requested.
- Supported Codecs by the provider
- G711
- G729
- G723
- T.38 UDP
Current test state
This product is being tested right now. The test is not yet completed.
Testing Enviroment
Scenario NAT
This scenario describes a setup where the PBX and phones are in a private network. The IP800 should use a stun server, in order to send correct SIP - messages. The IP800 works as media relay, all RTP - streams go through the PBX.
Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.
Configuration
Firmware version
All innovaphone devices use V9hf1 build 90600.01 as firmware.
SIP - Trunk
Number Mapping
Route Settings
Since the Provider support Overlap sending there is no need to use "force enblock" option in the routes. We recommend the use of "Interworking QSIG/SIP" option in the routes.