Howto:Setting time and date without using an NTP

this is 3rd party content not provided by innovaphone, see history for authors.

Applies To

This information applies to

• All gateways, V6

Problem Details

Sometimes it is temporarely impossible to access a NTP-server. Here' s a short possibility to set time and date via the web interface.

System Requirements

In the simpliest manner a working PBX - or any other accessible Innovaphone gateway running under V6

Configuration

Simply use the following syntax in your webbrowser:

http://<ip-of-your-Innovaphone-gateway>/!time%20%20dd.mm.yyyy-hh:mm

Example: http://10.10.10.120/!time%20%2021.02.2008-15:05

If you don't care about the correct time but just need the box to have a valid time, you can add the ctime argument to NTP0 in your config file, e.g.: config add NTP0 /ctime 21.02.2008-15:05. This way, your box will always start with this (probably wrong but valid) time.

Known Problems

None

Related Articles

Howto:How to obtain the current time for innovaphone devices using NTP