All public logs

Combined display of all available logs of innovaphone wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

14:55, 22 August 2024 Mpu talk contribs deleted page Howto:Can i add a route to a specific ISDN channel? (content was: "'''FAQ:''' Can i add a route to a specific ISDN channel? For example from GW1 to TEL1-L1 or TEL1-L2. '''Answer:''' No, there is no way to address the channel in our ISDN implementation (and there is rarely a need for it). With primary rate interfaces, you can configure the allocation strategy (bottom up or top down). also, in CAS, when used in channel bank mode, there is a feature to m...", and the only contributor was "Afi" (talk))
14:54, 22 August 2024 Mpu talk contribs deleted page Howto:Can I use just any HTTP server to stream PBX announcements to the waiting queue, or does it have to be IIS (content was: "'''FAQ:''' Can I use just any HTTP server to stream PBX announcements to the waiting queue, or does it have to be IIS? '''Answer:''' The type of web server doesn't matter, as long as it performs as follows: * for streaming of announcements, the server must support HTTP GET requests * for storing audio streams and to use the save/backup functions of the update server mechanism, the server must support HTTP put requests * for the voice mail, the server must support WebDav (wh...")
14:53, 22 August 2024 Mpu talk contribs deleted page Howto:Can I set ISDN bearer capability (speech or 3.1kHz) on my IP800 GW with v6.00 firmware? (content was: "FAQ: Can I set ISDN bearer capability (speech or 3.1kHz) on my IP800 GW with v6.00 firmware? Thanks. No, the bearer cap is always set appropriately depending on the calls nature (xparent or voice). {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:52, 22 August 2024 Mpu talk contribs deleted page Howto:Can I configure an IP secondary on ethernet interface of my IP800 gateways? If It is possible, can I configure different 802.1Q VLAN id to primary IP and secondary IP (like CISCO sub interfaces)? (content was: "'''FAQ:''' Can I configure an IP secondary on ethernet interface of my IP800 gateways? If It is possible, can I configure different 802.1Q VLAN id to primary IP and secondary IP (like CISCO sub interfaces)? '''Answer:''' No that's actually not possible. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:51, 22 August 2024 Mpu talk contribs deleted page Howto:Can IP800 gateway support RADIUS protocol? (content was: "FAQ: Can IP800 gateway support RADIUS protocol? Actually, there is no support for the RADIUS protocol. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:48, 22 August 2024 Mpu talk contribs deleted page Howto:I am developing a web (content was: "#REDIRECT Howto:Retreave PBX User Info form a Web Application", and the only contributor was "Afi" (talk))
14:13, 22 August 2024 Mpu talk contribs deleted page Howto:Is it possible with Innovaphone PBX to make "bigger" conference than just 3 party call? (content was: "Sure it is, there are 3 ways to do it. User can of course "cascade" 3-way conferences, that is, one user creates a conference, the 2 others in turn create a conference with another 3 users and so forth. "poor mans multiparty conference" if you like ;-) The other option is to use a 3rd party conferencing application, such as te-systems Colloquium.IP. See the "related article". ==V6 Sr2== From V6 Sr2 it is possible to use the conference interface on IP6000 for up to 60...")
14:12, 22 August 2024 Mpu talk contribs deleted page Howto:Is there any Tool available to maintain a LDAP Database? (content was: "For LDAP Databases you can use the Softerra LDAP Browser in Version 2.6 . It is a freeware tool an should match most requirements. See the links below for more information. == Related Articles == * [http://www.ldapadministrator.com/download.htm Softerra LDAP Browser] {{PAGENAME}}")
14:10, 22 August 2024 Mpu talk contribs deleted page Howto:It is possible to connect a external device like outlook, and use other CTI devices with TAPI protocol. This I know is possible with standard H.323 devices from your own product portfolio. (content was: "1. when doing an outgoing call (seen from api, lineMakeCall), then what happens is that the PBX will call the originating device (which will let the device ring) and once the user picks up will transfer the call to the real destination (as specified in the lineMakeCall). innovaphone devices will detect this situation and silently accept the call and go into handsfree mode. 3rd party devic...", and the only contributor was "Sga" (talk))
14:10, 22 August 2024 Mpu talk contribs deleted page Howto:Is totalrecall voice recording compatible with innovaphone? (content was: "==Applies To== This information applies to * all innovaphone devices, [http://www.totalrecallvr.com/ comsec's Total Recall Voice Logger] products  ==More Information== The product has not been tested by innovaphone. However, it is a purely passive solution that needs access to un-en...", and the only contributor was "Ckl" (talk))
14:08, 22 August 2024 Mpu talk contribs deleted page Howto:I have the phones IP202, IP 200 and IP100. How can I start a Phonebook Server? I hab seen this funktion on the Web Interface of IP100. (content was: "The IP110 , IP202 and IP200 support LDAP based phone directories. Please refer to the Related Articel below. The IP100 only has access to the built-in PBX directory (providing entries for all configured PBX users). If you are running the latest firmware from the web and use it with an innovaphone PBX, the IP100's directory should work right away. == Related Articles == [http://...", and the only contributor was "Tsr" (talk))
14:08, 22 August 2024 Mpu talk contribs deleted page Howto:Retrieve PBX User Info from a Web Application (content was: "'''FAQ:''' I am developing a web application to handling all the calling data from IP800 to webuser, and what I need to do next is: I want to read users in pbx. Can I do this in http => GET or POST command, or can IP800 send me some way this data? '''Answer:''' You should use the SOAP Interface for this. Have a look at the Reference:SOAP_API#UserInfo.5B.5D_FindUser.28string_v501.2C_string_cn.2C_string_h323.2C_string_e164.2C_integer_count.2C_integer_next.29|FindUser function...")
14:08, 22 August 2024 Mpu talk contribs deleted page Howto:Retrieve PBX User Info form a Web Application (content was: "#REDIRECT Howto:Retrieve PBX User Info from a Web Application", and the only contributor was "Ckl" (talk))
14:08, 22 August 2024 Mpu talk contribs deleted page Howto:Retreave PBX User Info form a Web Application (content was: "#REDIRECT Howto:Retrieve PBX User Info form a Web Application", and the only contributor was "Ckl" (talk))
14:07, 22 August 2024 Mpu talk contribs deleted page Howto:I am currently working with ANT engineer and they have problem that they can not adjust the db(voice level) on IP21. How we can adjust the level. (content was: "There is an option in the config applet called "Volume [-31...32]" for each TEL Interface. Try to increse the volume by entering an appropriate level. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:07, 22 August 2024 Mpu talk contribs deleted page Howto:I use IXI-Call Version 2.02.0024 Can I download Hotfixes or newer releases of this Software anywhere? Or how can I get hotfixes at all? (content was: "You will need to contact support. There is currently no download mechanism in place for 3rd party software. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:05, 22 August 2024 Mpu talk contribs deleted page Howto:I have the following problem according the Pickup list. When there is several ongoing active calls you can see them in the pickup list, but if one call is transferred to a GSM phone it disappears (content was: "'''FAQ:''' I have the following problem according the Pickup list. When there is several ongoing active calls you can see them in the pickup list, but if one call is transferred to a GSM phone it disappears '''Answer:''' Not sure if I fully understand the requirement, but if you want to see the status of the GSM, then you must make sure that the GSM does not make any calls bypassing the...", and the only contributor was "Gpa" (talk))
14:04, 22 August 2024 Mpu talk contribs deleted page Howto:I have provisioned 2 ip230s from you. I cannot find the default login information in your documentation. (content was: "'''FAQ:''' I have recently provisioned 2 ip230s from you for the purpose of evaluating them for recommendation and deployment to our customers. I have a unit powered up with an IP address fine. Unfortunately I cannot find the default login information in any of your documentation. '''Answer:''' The default login credentials for all innovaphone products are user: admin pw: type where...", and the only contributor was "Sga" (talk))
14:04, 22 August 2024 Mpu talk contribs deleted page Howto:I have a problem with a ip21 and a fax. It can receive incoming fax but not send any. I think the problem is the dialing. (content was: "'''FAQ:''' I have a problem with a ip21 and a fax. It can receive incoming fax but not send any. I think the problem is the dialing. The fax sends out one digit at the time and the PBX (ip800 fw 6), directy dials up the trunkline (SIP). How do I solve this problem? '''Answer:''' It looks like an overlap dialing problem force the IP21 to enblock dialing. So in the route from the IP21 t...", and the only contributor was "Sga" (talk))
14:03, 22 August 2024 Mpu talk contribs deleted page Howto:I have a IP-202 that seemed to fail during firmware . Red lamp is on, notheing else. I have been told that GWload should help. But in the description, it tels you to start with a "long reset". There (content was: "Press the ALT button while powering on the IP200/202. Keep it pressed for a while (10 seconds). == Related Articles == Howto:How to Reset IPXXX , factory default, led behaviour, tftp mode,clear config,gwload Howto:How_to_use_gwload {{PAGENAME}}")
14:03, 22 August 2024 Mpu talk contribs deleted page Howto:I am hearing a gap in an audio stream when i minimize or maximize a window? (content was: "==Summary== This short document explains a Windows error (before XP) while minimizing or maximizing a window. ==Applies To== This information applies to * SoftwarePhone ==More Information== ===Known Problems=== This is a Windows problem, blocking the sound device for 200ms or even longer when minimizing or maximizing a window. There is no workaround or fix for systems before Window...", and the only contributor was "Sga" (talk))
14:01, 22 August 2024 Mpu talk contribs deleted page Howto:Is innovaphone compatible with Skype? (content was: "No, Skype is using a proprietary protocol which they do not disclose or license for third parties to implement. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:00, 22 August 2024 Mpu talk contribs deleted page Howto:I deal since some weeks with an ISDN provider about this thing called CLIP no screening, because I like to see the caller ID if I have set a diversion to my mobile. What is CLIP no screening? (content was: "'''FAQ:''' I deal since some weeks with an ISDN provider about this thing called CLIP no screening, because I like to see the caller ID if I have set a diversion to my mobile. What is CLIP no screening? '''Answer:''' Technically spoken, CLIP no screening allows an endpoint (in this case the ipxxx attached to the ISDN trunk) to send calling party information which is not verified ("scre...", and the only contributor was "Sga" (talk))
14:00, 22 August 2024 Mpu talk contribs deleted page Howto:I can see articles titles in my RSS reader, but I receive an error when I try to follow the link to the article (content was: "This is because you will see the titles of ALL articles in the RSS feed, even those, you have no access to. To read the full text, special authorization may be required. == Related Articles == {{PAGENAME}}")
16:32, 19 August 2024 Mpu talk contribs created page Reference15r1:Concept Innovaphone Virtual Appliance (Created page with "{{PAGENAME}}  ==Applies To== This information applies to: *V14r1 *innovaphone Virtual Appliance *Intel/AMD CPUs * Virtualization platforms **VMware *** Workstation *** Player *** vSphere 4.x-6.x *** ESXi 6.0 **Microsoft Hyper-V ([[{{NAMESPACE}}:Concept IPVA On Hyper-V]]) *** Windows 8.1 *** Windows 10 *** Windows Server 2012 R2 *** Windows Server 2016 CTP4 **Linux based Hypervisors with [https://en.wikipedia.org/wik...")
08:58, 30 May 2022 Mpu talk contribs moved page Reference13r3:Apps/PbxManager/App Kuando Connector to Reference13r3:Apps/PbxManager/App Connector for Kuando

All public logs

Navigation menu

Search