Howto:Tracing from Trapeze Access Points to Wireshark

From innovaphone wiki
Revision as of 14:56, 4 December 2009 by Vsi (talk | contribs) (→‎Settings)
Jump to navigation Jump to search

Applies To

This information applies to

  • Trapeze WLAN Infrastucture (e.g. MXR-2)


Summary

This is a quick a dirty introduction to setting up a Trapeze management switch for tracing all 802.11 traffic to a Wireshark running on a PC. For complete and official documents, contact http://www.trapezenetworks.com.

Settings

Login to a Trapeze management switch through SSH, here the login transcript: 

login as: admin

Copyright (c) 2002 - 2009 Trapeze Networks, Inc. All rights reserved.

Username: admin
Password:

*trapeze-inno> enable

Enter password:
Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Tracing_from_Trapeze_Access_Points_to_Wireshark&oldid=16001"