ReleaseNotes10:Firmware
This is the Firmware V10 Roadmap Document.
The release date of the next beta is planed for the third monday of a month. Please note that this a scheduled and no fix date.
This article is generated automatically. Do not edit! Please see the disclaimer before using the information presented here!
V10 Beta 2
Changes included in Version 10 beta2 Definition
New Features
PBX: Show conference object online state
| Status | Closed |
| Id | 89440 |
The PBX broadcast conference object supports the online state in myPBX dependent on its configuration and its group members' online state now.
Encoding of conference video stream
| Status | To-decide |
| Id | 89455 |
If a participant starts a 3rd party conference while it is already receiving a video conference stream, it has to adapt the conference stream to fit the encoder size. We have to downscale the image.
H.323: Automatically connect signaling TCP if NAT router is detected
| Status | To-decide |
| Id | 89497 |
When regestering an endpoint from a private network to a PBX within the public network, the signaling TCP connection must be established and maintained by the endpoint. Otherwise calls to the endpoint are not possible.
myPBX: Pickup calls
| Status | Closed |
| Id | 89536 |
Pickup calls that are alerting at a favourite contact.
PRI-QSIG: Interop config for channel numbering
| Status | To-decide |
| Id | 89578 |
The QSIG standard defines to use Channel numbers (1-30) instead of timeslot (1-15, 16-31) as it is defined for EDSS1. There are many 'old' QSIG implementations around, which do it wrong. The QSIG-ECMA1 protocol setting is used for these 'old' implementations and the QSIG-ECMA2 setting for standard conform inplementations.
With the QSIG-ECMA1 also 'old' facility coding is used. There is also the combination of standard facility coding and timeslots for channels around so an independent mechanism to configure the channel numbering is needed.
Bug Fixes
myPBX: Select im session when focusing chat window
| Status | Closed |
| Id | 89490 |
In order to simplify adding users to the chat.
PBX Mobility: Conference ID not set for outgoing calls initiated by myPBX
| Status | To-decide |
| Id | 89502 |
This could cause several problems:
- When the call was sent to a local user with multiple registrations, the call to each registration had a different conferenceID, so myPBX could not match these calls to actually being only a single call, so multiple calls were dissplayed
- The CDRs created for this call could not be matched
SIP: Auto answer with SDP in ACK
| Status | To-decide |
| Id | 89539 |
Auto answer results into no-audio when INVITE comes w/o SDP offer.
SIP: Don't tell application that registration is down when handling redirect response
| Status | To-decide |
| Id | 89582 |
Don't tell application that registration is down when handling redirect response for REGISTER.
Gateway: Missed FAX pages received with the FAX interface
| Status | Closed |
| Id | 89587 |
If the FAX interface is used to receive a FAX document with ECM mode and the transmitting terminal appends additional EOLs, the page counter is wrong and document pages are not written. This is fixed now.