Howto:Belgacall - Spike Technics - SIP Provider

From innovaphone wiki
Revision as of 16:42, 29 August 2014 by Sga (talk | contribs)
Jump to navigation Jump to search

Innovaphone Compatibility Test Report

Summary

SIP Provider: Spike Technics The provider was tested by the provider Spike Technics. This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.

The provider doesn't support Redundancy scenarios with multiple SIP-trunks(master & standby) registered at one account.

That being said, the provider has achieved 94% of all possible test points. For more information on the test rating, please refer to Test Description

  • Features:
    • Direct Dial In
    • Fax over IP (T.38)
    • DTMF
  • Supported Codecs by the provider
    • G711
    • G729
    • T.38 UDP

Current test state

This product is being tested right now. The test is not yet completed.


Testing Enviroment

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature Result
call using g711a OK
call using g711u OK
call using g723 NA
call using g729 OK
call using g722 NA
Overlapped sending Nok
early media channel OK
Fax using T.38 OK
T.38 Transcoding by the provider OK
Reverse Media Negotiation OK
CGPN can be suppressed OK
CLIP no screening OK
Long time call possible(>30 min) OK
External Transfer OK
NAT Detection OK
Redundancy NA
SIP over TCP OK
Voice Quality OK? OK

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) OK
Outbound(Innovaphone -> Provider) OK
Loop In call(Innovaphone -> Provider -> Innovaphone) OK

DTMF

Tested feature Result
DTMF tones sent correctly via RTP-events(RFC 2833) OK
DTMF tones sent correctly via SIP-Info OK
DTMF tones received correctly via RTP-events(RFC 2833) OK

Hold/Retrieve

Tested feature Result
Call can be put on hold OK
Held end hears music on hold / announcement from PBX OK

Transfer with consultation

Tested feature Result
Call can be transferred OK
Held end hears music on hold OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK OK
inno1 calls PSTN-phone. inno1 transfers to inno2. OK OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK OK

Transfer with consultation (alerting only)

Tested feature Result
Call can be transferred OK
Held end hears music on hold or dialling tone OK
Call returns to transferring device if the third

Endpoint is not available

OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK
inno1 calls PSTN-phone. inno1 transfers to inno2. OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK

Blind Transfer

Tested feature Result
Call can be transferred OK
Held end hears dialling tone OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MOH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK OK
inno1 calls PSTN-phone. inno1 transfers to inno2. OK OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK OK

CFU / CFB Transfer

Tested feature Result
Call can be forward OK
Held end hears dialling tone OK

CFNR / Blind Transfer (alerting only)

Tested feature Result
Call can be transferred or forward OK
Held end hears dialling tone OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group OK
Caller can make a call to a Waiting Queue OK
Announcement if nobody picks up the call OK

Configuration

SIP TRUNK

NUMBERS ROUTES IN THE NETHERLANDS

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Belgacall_-_Spike_Technics_-_SIP_Provider&oldid=35024"