Howto:Nokia Mobile Phones E Series
Innovaphone Compatibility Test Report
This Article describes how to connect (and what is working) Nokia E Series Mobile phone (dual-mode phone ) with innovaphone Pbx.
Tested with the Nokia E65
Applies To
This information applies to
- all innovaphone PBX
Build V6 07-60786, and later
- Nokia E65
Software version: 1.0633.58.03 and 2.0633.65.01
innovaphone configuration
set a normal user in the PBX
for example
Long Name: E60
Name: E60
Number: 60
Nokia E65:
Settings on Nokia E65
Sip Settings
Navigate to Tools->Settings->Connection->SIP settings:
Profile name: "innovaphone" (or anything else)
Service profile: IETF
Default access point: <your wifi access point>
Public user name: sip:E60@<IP address of your innovaphone pbx>
Use compression: No
Registration: Always on
Use security: No
Proxy server
tools -> settings -> connection -> SIP settings -> Proxy Server
Proxy server address: sip:<IP address of your innovaphone pbx>
Realm: <IP address of your IP800>
User name: E60
Password: <secret>
Allow loose routing: Yes
Transport type: UDP
Port: 5060
Registrar server
tools -> settings -> connection -> SIP settings -> Registrar Server
Registrar serv.addr.:<IP address of your innovaphone pbx>
Realm: <IP address of your innovaphone pbx>
User name: E60
Password: <secret>
Transport type: UDP
Port: 5060
Internet tel settings
tools -> settings -> connection -> Internet tel settings
give the name and profile
For trouble shooting purpose take the option of Wireless LAN
tools -> settings -> connection -> Wireless LAN
Show availability Yes
Scan for Networks every minute
Supported Codecs
Codec | Applies |
---|---|
G711 | yes |
G729 | yes |
G723 | not supported by nokia |
G726 | not supported by nokia |
GSM | no |
T.38 UDP | no |
G722 | not supported by nokia |
Test Results
Tested with innovaphone PBX and innovaphone IP phones connected with H.323 to the PBX
Summary:
- The voice quality is good - hold/retrieve is working (from Nokia and from innovaphone phone).
- Transfer with consultation is working (but only when there is no codec change)
- semi attendant transfer - or so called transfer without consultation is not working
- Blind transfer is working
- with Nokia phone version 2.0633.65.01 it is also possibe to transfer the call from the Nokia phone to another endpoint
Basic Call
Tested feature | Result |
---|---|
call using g711a | yes |
call using g711u | yes |
call using g723 | no |
call using g729 | yes |
Overlapped sending | yes |
early media channel | not tested |
Fax | no |
Voice Quality OK? | yes |
Dial Inward
Tested feature | Result |
---|---|
Inbound(nokia -> innovaphone Phone & via isdn) | yes |
Outbound(innovaphone Phone & via isdn -> nokia) | yes |
DTMF
Tested feature | Result S1 |
---|---|
DTMF tones sent correctly | yes |
DTMF tones received correctly (audible) | no |
Hold/Retrieve
hold possible with the Nokia phone and the innovaphone phone
Tested feature | Result |
---|---|
Device can put call on hold | yes |
Holding end hears music on hold | no - instead one beep tone and information on display that call is on hold |
Device can terminate either call and retrieve remaining call | yes (nokia device and innovaphone IP Phone) |
Transfer with consultation
Transfer only working when there is no codec change
Tested feature | Result |
---|---|
Device can transfer call | yes |
Holding end hears music on hold | no-instead one beep tone and information on display that call is on hold |
Call returns to transferring device if the third
Endpoint is not available |
yes |
Transfer with consultation (alerting only)
Tested feature | Result |
---|---|
Device can transfer call | no |
Held end hears music on hold or dialing tone | no - instead one beep tone and information on display that call is on hold |
Call returns to transferring device if the third
Endpoint is not available |
yes |
Blind Transfer
Tested feature | Result |
---|---|
Device can transfer call | yes |
Holding end hears dialing tone | no instead one beep tone and information on display that call is on hold |
Broadcast Group & Waiting Queue
tested also when the nokia phone is part of broadcast & waiting queue
Tested feature | Result |
---|---|
Caller can make a call to a broadcast group | yes (also when nokia phone is part of) |
Caller can make a call to a waiting Queue | yes (also when nokia phone is part of) |
Announcement if nobody picks up the call | yes ( only with same codec) |
Calling Party Number
Tested feature | Result |
---|---|
CGPN is displayed correctly | yes |
CGPN can be supressed | via pbx - send number changes the cgpn |
Known Problems
- Having a incomming call via the Trunk object and there is T.38 enabled (on the Interface or Gateway) then there is no voice connection to the Nokia Phone. When T.38 is enabled innovaphone sends the sdp offer in two media descriptions - because with that behaviour the nokia phone having problems with parsing the sdp offer.
As workaround you need to route the fax destination calls with CDPN via another gateway into the Pbx (where T.38 is enabled)
- semi attendant transfer - or so called transfer without consultation is not working.
- any kind of transfer with codec change is not working - try to avoid codec changes when using Nokia phones (so all phones ,gateway settings and waiting queue announcements should use the same codec )
Music on hold is not affected because the Nokia phone does not play it - instead it shows call on hold on the phone display.
Additional Info
To check your latest software version press *#0000# on your nokia phone and go to http://europe.nokia.com/A4577224