Special Accessories by Mehrens Unified Communication GmbH

Special Accessories by Mehrens Unified Communication GmbH

Mehrens Unified Communication GmbH Special Accessories by Mehrens Unified Communication GmbH with 3D printing technologie

Certification Status

This product is listed due to a customer testimonial. No tests have been conducted by innovaphone. Article has been finalized October 2023.

Vendor

As a partner, you have an innovaphone Value Added Distributor Pro at your side. We connect people and always stand up for your needs. As a “value added” distribution, we also provide our partners with technical advice and support in their day-to-day business. We develop our own products for innovaphone devices to expand the range of functions and meet the requirements of end customers.

Description

3D-Products

1 Kuando Monitor-Halter

Kuando Monitor Holder The Kuando Busylight UC Omega is difficult or impossible to attach to modern narrow monitors with the included adhesive pad. We are therefore offering a new solution here: a holder that can hold the Kuando Busylight UC Omega and can be attached to all monitors with a frame thickness of up to 38 mm at the top.

2 DECT/WLAN telephone wall and pipe mount

DECT/WLAN telephone wall and pipe mount suitable for DECT and WLAN telephones IP64, IP65 and IP73, as well as Ascom D43, D63 and I63. Holder can be attached with two screws, or with up to 4 cable ties, two each for a vertical and horizontal pole .Application locations include: B. in the forklift, in the emergency vehicle, on the picking truck, in short, at all mobile work locations where you want to have your DECT phone with you but not in your hand.

3 Wall mount for IP2X2 phones

Wall mount for IP2X2 telephones + Drop-Stop Bundle Unscrew the two upper housing screws on the back and place this wall mount corner on top. The screw is screwed back in through the wall bracket and now also holds the wall bracket. This has a holder on the wall side for a normal wall screw including a drilling template.

4 Wall kit / wall and ceiling mount

Wall kit / wall and ceiling mount for IP411, IP811, IP3011, IP6010, IP29-2, IP29-4, IP29-8, IP600, IP1500, IP400, IP2000, IP3000, IP6000, IP38, IP302, IP305, IP800, IP302 , IP1130, IP0010, IP1060, IP1130, so all stainless steel housings. The kit includes a wall/ceiling bracket, 3 mounting screws for connection to the stainless steel housing and a locking tab. The safety tab is required for mounting under the table to prevent the holder from unhooking. The securing tab is not required for wall mounting. The kit includes a wall / ceiling bracket, 3 mounting screws for the connection to the stainless steel housing and a securing strap. The safety tab is required for assembly under the table to prevent the bracket from unhooking. The securing strap is not required for wall mounting.

5 Stand-Up for IP112 / IP111 / IP10X*

Stand-Up for IP112 / IP111 / IP10X* The stand-up changes the tilt of an IP-111, IP112, IP101*, or IP102* from 28 degrees to 40 degrees. *On the IP10x, the stand-up sits a little looser, but is secure. Pack: 2 pcs.

6 MEHRENS IP2x2 mobile phone stand

MEHRENS IP2x2 mobile phone stand for mobile phone cases. It comes in three diferent versions Standart (6a), Big and for Apple MagSafe(6b).

7 IP11x display anti-glare protection

Display glare protection for IP111 and IP112 against unwanted reflections. Functions and visibility of the display are not restricted. It can be stuck to the phone with double-sided adhesive tape.

8 Drop Stop - for IP222 / IP232

Drop-Stop - for IP222 / IP232 The drop-stop, manufactured using the 3D printing process, gives your phone a classic receiver stop. This means that there is no longer any play between the receiver and the base device, which means that the receiver no longer falls off the base unit when you hastily grab it. The receiver can be hung up again more forcefully, as with classic telephones with a mechanical rocker. A conversation is no longer accidentally ended when you The receiver is not grasped properly and the contact is opened for the call by briefly rocking and then immediately closed again.

10 Flat Wall Kit for IP1XX

Flat Wall Kit for IP1XXFlat mounting option for IP101, IP102, IP111, IP112 and IP112a. 5 mm distance from the wall for laying the LAN cables. Particularly suitable for wall telephones in narrow hallways, in-table mounting for e.g. .B. maritime operations, or mobile operations centers. Two-piece mounting set for the click mount in the telephone and four normal screw heads.

Version

All products were tested on old and current production lines.

Configuration

Individual assembly instructions (if necessary) are included with the product or are engraved on the product.

Contact

Mehrens Unified Communication GmbH

Memellandstr. 4

D-24537 Neumünster

Tel: +49 (0) 43 21 - 96 66 9 - 50

Fax: +49 (0) 43 21 - 96 66 9 - 66

Mail: vertrieb@mehrens.de

Website: mehrens.de