Howto:Feature List in English: Difference between revisions
Jump to navigation
Jump to search
m (→Applies to) |
|||
(62 intermediate revisions by 9 users not shown) | |||
Line 6: | Line 6: | ||
This information applies to | This information applies to | ||
- All innovaphone products based on V7, V8, V9 and V10 | |||
Starting with V11, this list is discontinued. Firmware-dependent functions and improvements can be found in the respective release notes: | |||
* [[Reference11r1:Release_Notes_Firmware#11r1_Service_Release_1_(110925)|V11r1]] | |||
* [[Reference11r2:Release_Notes_Firmware#11r2_Service_Release_1_(113182)|V11r2]] | |||
* [[Reference12r1:Release_Notes_Firmware#12r1_Final_(120857)|V12r1]] | |||
* [[Reference12r2:Release_Notes_Firmware#12r2_Final_(125149)|V12r2]] | |||
* [[Reference13r1:Release_Notes_Firmware|V13r1]] | |||
* [[Reference13r2:Release_Notes_Firmware#13r2_Main_improvements|V13r2]] | |||
* [[Reference13r3:Release_Notes_Firmware#Main_improvements_in_13r3|V13r3]] | |||
Functions of earlier firmware versions are also included in newer versions (subject to change and discontinuation). | |||
==More information== | ==More information== | ||
===System Features | === PBX System Features === | ||
ACD groups | * Access to exchange via group number | ||
* Access to separate exchange via individual number | |||
Alternate route selection | * ACD groups | ||
* Active Directory Replication | |||
* Administration via uniform interface | |||
* Alarm and error events | |||
* Alternate route selection | |||
* Announcement before pickup (*) | |||
Automatic call distribution (ACD) | * Announcements (*) | ||
* Authorisation groups (class of service) | |||
Automatic night switching with week clock | * Automatic break through for call protection for preferred numbers | ||
* Automatic call distribution (ACD) | |||
Automatic route selection (ARS) | * Automatic night switching with week clock | ||
* Automatic route selection (ARS) | |||
* Bootcode with minifirmware (not supported with IP3000) | |||
* Branches (virtual central PBX) | |||
* Bunched circuit | |||
* Call back | |||
* Call back also if internal call | |||
* Call detail records (CDR) | |||
* Calling line identification restriction (CLIR) | |||
* Calling party identification (CLIP) | |||
* Calling to E.164 | |||
* Calling via ENUM (H.323 and SIP) | |||
Direct dial (with and without number reassessment) | * centralized backup /firmware/config upload | ||
* Circle call with circle call query (#) | |||
* Clock synchronization via IP | |||
* Config templates for PBX User | |||
* Configurable tones | |||
* Configure / change / delete call diversion via web | |||
* Conversation return to operator | |||
* Cross connection via IP | |||
Enhanced H.323 features according to | * Cross connection via ISDN | ||
* Different call (external, internal) | |||
External communication | * Direct dial (with and without number reassessment) | ||
* Door bell interface with door opener function (#) | |||
* DTMF detection disabling | |||
* DTMF-post dial/direct dial | |||
* Emigration of endpoint | |||
* Enhanced error reporting (SIP, QOS parameter, router error reporting) | |||
Flexible dial plan | * Enhanced H.323 features according to H.450.x | ||
* Extended DTMF Object (feature set via DTMF dial) | |||
* External communication | |||
* Firmware upload in DRAM (not supported with IP3000) | |||
* Floating license model | |||
* Flexible dial plan | |||
General night switching | * General night switching | ||
* Group call (all, circular) | |||
* Hide Objects from LDAP | |||
* Home office integration | |||
Group call | * HTTP/ HTTPS allowed stations | ||
* Incoming direct call to subscriber or group | |||
Home office integration | * Interactive call acceptance (*) | ||
* Interface for external announcement construction (#) | |||
* Internal communication | |||
* Internal music on hold | |||
Interactive call acceptance (*) | * Least cost routing (LCR) | ||
* Log forwarding | |||
Interface for external | * LDAP replication | ||
* Message center (H.450.7 or DTMF) | |||
Internal communication | * Message Waiting Indication (MWI) | ||
* Messaging (SIP and H.323) | |||
* Mixed dial method (overlap and en-block dialing) | |||
* MS-chap V1/V2 | |||
Least cost routing (LCR) | * Multi conferencing (IP800, IP6000, IP0010, IP1060, IP3010, IP6010) | ||
* Multi protocol (H.323, SIP) | |||
* Multilevel admin access (detailed multilevel user rights for the PBX configuration) | |||
* Multiple system admin (multiple admin and viewer rights possible for the whole system) | |||
* Multistage login (multi-user) | |||
* Music / announcement in standby from analogue resource (#) | |||
* Music / announcement in standby from HTTP resource (*) | |||
* Network wide features (Master/slave with virtual PBX) | |||
Multi protocol (H.323, SIP) | * Only calling to registered subscribers (passive control) | ||
* Overflow of subscribers and cross connection | |||
Music/announcement | * Overlapped sending | ||
* PBX directory search (LDAP search via DTMF) | |||
Music/announcement | * Phonebook either from internal or from external source (LDAP) | ||
* QSIG | |||
Network wide features (Master/slave with virtual PBX) | * QSIG inter-working | ||
* QSIG trunking (point to point and point to multipoint) | |||
Only calling to registered subscribers (passive control) | * Redundancy of the ISDN-lines | ||
* Redundancy of the PBX | |||
QSIG | * Remote monitoring and remote diagnostics | ||
* Remote software upgrade | |||
QSIG inter-working | * RTP Proxy | ||
* SDP Transit (for video and other codecs) | |||
QSIG trunking (point to point and point to multipoint) | * Short dial (individual, group, system wide) | ||
* Silent intrusion | |||
* SIP/H.323 Media Relay (RTP stream routing via gateway) | |||
* SIP trunking | |||
* SIP via TCP | |||
* SIPS (SIP-Secure) – SIP via TCP/TLS (not supported with IP3000) | |||
* SNMP Traps (alarm events) | |||
* SOAP-API | |||
* SRTP (Voice encryption) for H.323 and SIP (not supported with IP3000) | |||
* Subscriber authorisation | |||
* Standard protocols to the endpoint | |||
* Subscriber groups with progressive call (parallel, circular, sequential) | |||
* Switch between day/night with code digit from subscribers | |||
* System time/date via timeserver (LAN or web) | |||
* TAPI / Multi line TAPI (via several PBX’s / locations) | |||
* Telephone number assignment | |||
* Time based subscriber authorisation | |||
* Twin Phones | |||
* US standard (T1 and CAS) | |||
* VoIP-CAPI | |||
* Waiting queue – call busy operators / CFU disable operators | |||
* 802.1x | |||
* Active Directory Replication/More detail information in error situations | |||
==== New in V8 ==== | |||
* Announcing the queue position in a waiting queue | |||
* Call completion on busy/free to ISDN | |||
* Customized Visual Appearance (individually designable user interface) | |||
* Dual Forking (OCS compatible) | |||
* Dynamic PBX (more PBXs on one Device ) PBX hosting / PBX virtualization | |||
* Kerberos based authentication and Cross Realm authentication | |||
* Mobility (GSM integration) | |||
** Call-waiting | |||
** hold | |||
** transfer | |||
** park | |||
** group login/logout | |||
** mobility on/off | |||
** setting presence status | |||
* Off load Dialtone (external gateway) | |||
* Off load Media Relay (external gateway) | |||
* Off load MOH (external gateway) | |||
* Presence | |||
* Recording at the ISDN and analogue interfaces | |||
* Roaming Phone Profiles | |||
* RSTP (Rapid Spanning Tree) | |||
* Send Message to group | |||
* SIP error detection (alarm/event updated) | |||
* SIP Federation | |||
* SIP video multisite support | |||
====New in V9==== | |||
* Executive/secretary enhancements | |||
** Secretary can initiate calls with the CLIP from the executive. | |||
** Executive can see if the secretary is joined or unjoined in the primary secretary group. | |||
** Executive sees if a call diversion is set at the secretary. | |||
** Breakthrough disabled call waiting at secretary. | |||
* Reporting | |||
** Based on internal or external Linux Application Platform | |||
** Based on PBX CDR´s | |||
** Predefined filter | |||
** Reports (export as PDF, XML) from filter, combined filter, date and time | |||
* Emergency calls priority | |||
* Import/Export PBX user database (CSV/XML) | |||
* Individual MOH (context sensitive based on object, node or PBX) | |||
* IP filter for registrations with or without password | |||
* IPv6 support (IPv6 routing, 6to4 routing and http access, telnet) | |||
* LDAP via TLS | |||
* MTLS | |||
* NTP redundancy | |||
* Partnerkeys via separate Pbx´s | |||
* Wideband audio | |||
* Enhanced Boolean (call forward, filter and diversion filter) based also on date | |||
* Maximum call duration | |||
==== New in V10 ==== | |||
* Show video calls on page PBX/Calls | |||
* Show video capability of registrations on page PBX/Registrations | |||
* Tone type for PBX generated tones (e.g. for Mobility) configurable | |||
* Explicit assignement of licenses to users | |||
* Server based myPBX call lists included with myPBX licenses at no extra charge | |||
* per user Voicemail license scheme | |||
* Support for cloud setup | |||
* Ability to correct calendar-driven presence information manually | |||
* 'do-not-disturb' presence | |||
* Support for Mobility client using data for call-control features (hold, retrieve etc.) | |||
* configurable default visibility (presence/dialog) for group members | |||
* Disconnect other ringing endpoints if call is rejected on one in a twin-phone configuration | |||
* Broadcast Conference object supports chat conferences | |||
* Offload-able media interface for voicemail (Hosting) | |||
* Waiting Queue supports mobile operators | |||
* Conditional Mobility/Forking (via ''Boolean'' object) | |||
* Kerberos with AES (Windows 2008R2 compatibility) | |||
===Features IP Phones – IP110 / IP200 / IP230 / IP240 / IP240-1000 / IP241 / IP222 / IP232=== | |||
* Adjustable loudness | |||
* Adjustable ringing tones also possible, import RTTTL and midi files | |||
* Alphanumeric phonebook | |||
* Announcement via loudspeaker | |||
* Automatic callback on busy and free | |||
* Automatic redialing | |||
* Automatic redialing to busy bunched circuit | |||
* Blind transfer | |||
* Call diversion to internal phone number | |||
* Call hold / retrieve call diversion to external phone number | |||
* Call intrusion | |||
* Call list (outgoing, incoming, combined, not reached, not answered) | |||
* Call park and enquiry from other subscribers | |||
* Call prevention | |||
* Call transfer / pickup (selective and from a group) | |||
* Call waiting (acoustical and optical signaling of waiting calls) | |||
* Caller identification (name/number) | |||
* Changeover of the assigned partners | |||
* Conference (3 way) | |||
* Configuration of the voice recording via HTTP | |||
* Connect to busy and free subscribers without notification | |||
* Counter and list of missed calls | |||
* Date and time display (automatic summer/winter time adjustment) | |||
* Delete call back | |||
* Delete variable call diversion | |||
* Dialing an IP address (with and without RAS) | |||
* Dialing with code key from an unauthorized phone | |||
* Direct dialing (immediate, internal/external) | |||
* Display duration of call | |||
* Display calling number | |||
* Emigration of subscriber/endpoint | |||
* Fixed call diversion (unconditional, no answer (time adjustable) on busy) | |||
* Forced announcement (priority call) | |||
* Function keys – multitude possible – exact list can be found in the technical specification of each IP phone | |||
* Hands free | |||
* Headset | |||
* Individual configuration | |||
* Individual phonebook | |||
* Intercom with automatic call pick up | |||
* Interlinked and limitless multiple conference | |||
* Manager/assistant feature | |||
* Message waiting indication (MWI) | |||
* Messaging | |||
* Multi language | |||
* Multi-protocol and multi-registration (SIP and H.323 concurrent) | |||
* Multiple registrations with selective de-registration | |||
* Mute (switch off the microphone) | |||
* Name dialing | |||
* Open listening | |||
* Over plugging (connect call to a busy subscriber) | |||
* Phone lock | |||
* Preferred subscribers | |||
* Project code | |||
* Redialing of the last 100 dialed numbers | |||
* Silent Intrusion | |||
* SIP via TCP | |||
* SIPS (Secure SIP via TCP/TLS) | |||
* SRTP (SIP and H.323) | |||
* Status indication of the subscriber (free/busy/call) | |||
* Subscriber with several lines | |||
* Subscriber with several numbers | |||
* Transfer with consultation | |||
* Variable call diversion | |||
* 802.1x | |||
==== Phone Menu Languages ==== | |||
* ger - Deutsch | |||
* eng - English | |||
* frn - Français | |||
* dut - Nederlands | |||
* ita - Italiano | |||
* esp - Español | |||
* swe - Svenska | |||
* dan - Dansk | |||
* nor - Norsk | |||
* fin - Suomi | |||
* cze - Cestina | |||
* est - Eesti | |||
* por - Português | |||
* lat - Latviešu | |||
* cro - Hrvatski | |||
* pol - Polski | |||
* rus - Русский | |||
* slo - Slovenija | |||
* hun - Magyar | |||
* tha - ภาษาไทย | |||
==== New in V9 ==== | |||
* Colour display (IP241 / IP222 / IP232) | |||
* Individual background picture (IP241 / IP222 / IP232) | |||
* Individual audible signal for announcement calls /multicast announcements and messaging | |||
* 802.3az (IP222 / IP232) | |||
* Wideband audio (IP222 / IP232) | |||
==== New in V10 ==== | |||
* Russian and Slovenian languages | |||
===Features 3rd party Phones connected to analogue (POTS) port, DECT Phones IP52 / IP54 / IP55 / IP61 / IP63 / IP65 === | |||
* Call completion on busy | |||
* Call completion on free | |||
* Call diversion to internal/external number | |||
* Call hold/retrieve | |||
* Call park and enquiry from other subscribers | |||
* Call protection | |||
* Call transfer/pickup (selective and from a group) | |||
* Call waiting (acoustic signalling of the waiting call) | |||
* Clip to an analogue phone | |||
* Confirmation tone (positive and negative) | |||
* Connect to a free and busy subscriber without notification | |||
* Delete variable call diversion | |||
* Dial with code key from an unauthorized phone | |||
* Direct dial immediate (internal, external) | |||
* Do not disturb (internal and external calls) | |||
* Fixed call diversion; unconditional, no answer (time adjustable), on busy | |||
* Lock phone | |||
* Message Waiting Indication (MWI) on DECT Phones | |||
* Preferred subscriber | |||
* Project code | |||
* Special tone when active feature | |||
* Transfer with consultation | |||
==== New in V10 ==== | |||
* DECT: pass the DECT Security certification | |||
===Features innovaphone Voice mail (*)=== | |||
* ''Languages supported: German / English / Italian / French / Dutch / Spanish / Norwegian / Danish / Polish /Swedish / Czech – additional languages on demand.'' | |||
* ''Voicemail runs on Compact Flash (CF slot in IP800, IP305, IP302, IP2000, IP6000, IP1060, IP3010, IP6010) or on external Web Server'' | |||
* Email notification (with or without attachment) | |||
* Listen to/delete /store voice mails by means of DTMF input | |||
* MWI (according to H.450.7) | |||
* Personal greeting message | |||
* Voice recording | |||
==== New in V9 ==== | |||
* Voicemail support SRTP | |||
=== Features myPBX === | |||
UC client (myPBX) web-based and Windows launcher | |||
* ''Languages supported: Danish / English / Estonian / Finnish / French / Italian / Latvian / Dutch / Norwegian / Polish / Portuguese / Spanish / Swedish / Czech – additional languages on demand.'' | |||
** CTI (initiate call, accept call, terminate call, hold call, retrieve call, transfer call, park call, 3PTY conference) | |||
** Manage own call diversions | |||
** Call list | |||
** Presence (manage own presence state) | |||
** Buddylist (including partners presence and call status) | |||
** Chat (multiparty chat) | |||
** Audioconference (via innovaphone audio conference Interface) | |||
** Videoconferece (via integration of Webex or Microsoft Livemeeting) | |||
** Application sharing (via integration of Webex or Microsoft Livemeeting) | |||
==== New in V10 ==== | |||
* Improved usability, new look, single-window design | |||
* Intuitive LDAP search (arbitrary search string input, results from different sources are merged) | |||
* Possibility to display additional info from the directory in the LDAP search | |||
* Support for LDAPS (LDAP over TLS) | |||
* Improved instant messaging (subject, list of participants, messages are received before the chat is accepted, window can be closed and opened again without terminating the session) | |||
* Simplified call diversion configuration (synchonized with the favourite call diversions on the phone) | |||
* Simplified visibility settings | |||
* Do not disturb (new presence activity, chats are rejected if DND is set) | |||
* Pickup calls from favourites | |||
* Unpark calls from favourites | |||
* Unlimited length of call list (using a paging mechanism). | |||
* Configure language in launcher | |||
* Translated launcher user interface | |||
* Auto appear offline, after an idle timeout that can be configured in the launcher | |||
* MSI-Parameters for deployment of the launcher | |||
* Launcher can dock to the left or right screen border | |||
* Launcher can write trace files for debugging purposes and support | |||
* Audio conferencing from the chat window has been removed | |||
* Desktop notifications and notification sounds for calls and instant messaging. Accept and reject calls directly from the notification window. Visibility requests using desktop notifications. | |||
* Configure mobility | |||
* Tool that dials or starts chats in myPBX. This tool is registered in windows as an handler for tel: sip: and im: URIs. | |||
* Display diverting info at incoming alerting calls | |||
* Display causes at disconnecting calls | |||
*Video calls between two myPBX Launchers is now possible (runs on Windows 7 and Windows 8, see [[Reference10:Concept myPBX Video]] for details) | |||
*3 party Video conference | |||
*Webcam selection if several webcams present | |||
*Webcam preview of the selected webcam | |||
*Webcam menu to control settings like brightness or contrast. Adjustable at webcam preview or even during the video call | |||
*Webcam is configured to deliver 352x288 or 320x240 resolutions and the maximun frame rate available, usually 30 fps | |||
*H264 encoder configured to deliver an average rate of 250 kbps | |||
*H264 video stream compatible with other vendors like LifeSize or Polycom | |||
=== Microsoft Office 2010/2013 integration (introduced in V10) === | |||
allows to see the presence of a user inside a Microsoft Office 2010 application | |||
* Presence visibility inside an Office application | |||
* Start of a chat from inside an Office application | |||
* Start of a call from inside an Office application | |||
=== Exchange Calender Connector (introduced in V10) === | |||
Replicates Exchange Calendar information to PBX user presence | |||
(Linux Application Platform) | |||
* Presence is set to busy during calendar appointments | |||
* The appointment subject is provided as presence note | |||
* later appointments the same day are indicated as presence note, if presence is 'available' | |||
=== Fax Server (introduced in V10)=== | |||
(Linux Application Platform) | |||
* email-to-fax and fax-to-email gateway | |||
* Each PBX user has an own fax number: personal fax | |||
* Fax source formats | |||
** plain text | |||
** HTML | |||
** PDF files | |||
** all other file formats which can be converted by OpenOffice | |||
* Cover page | |||
* e-mail delivery/non-delivery report | |||
* Incoming fax documents delivered as PDF | |||
===Features Operator (V8) software based=== | |||
* ''Localized versions: German / English / Italian / Dutch – additional languages on demand'' | |||
* Busylampfield (divided into groups) | |||
* Call journal | |||
* Call transfer (with/without consultation (blind)) | |||
* Drag&Drop or with keypad use | |||
* Integrated help | |||
* Monitor blind transferred calls | |||
* Monitor of waiting queue | |||
* Name display for incoming calls in LDAP directory | |||
=== | * Park/unpark | ||
* Send messages to PBX users | |||
* Searching within a LDAP directory | |||
* Searching for PBX users in all PBX´s | |||
* Set/change call forward for all PBX users | |||
* Set/change presence status for all PBX users | |||
* Show busy state | |||
* Show call forward | |||
* Show current call | |||
* Show presence status | |||
* State-of-the-art user interface | |||
* Support of Master/Slave scenarios | |||
* | |||
Call | |||
Call transfer | |||
===Features Interactive Voice Response (IVR) (*)=== | ===Features Interactive Voice Response (IVR) (*)=== | ||
* Call handling according to lines and/or calling number (CLI) | |||
* Listen to the menu also from internal subscribers | |||
* Multi level menu | |||
* Overflow from the operator to an automatic operator | |||
* Voice menu at extension (if no answer, busy, unconditional) | |||
* Voice menu with information and automatic dialing | |||
* Voice menu with predefined destinations | |||
* Voice menu with manual dialing of the destination (DTMF) | |||
==== New in V8==== | |||
* Announcing the queue position in a waiting queue | |||
====V8==== | |||
Announcing the | |||
* Note: | |||
* (*) External or internal (CF-card) web server required | |||
* (#) innovaphone IP21 required | |||
== Related Information == | |||
[[Reference10:Concept_Phone_Firmware_10]] | |||
See the [http://www.innovaphone.com/en/services/downloads.html ''Downloads'' section on www.innovaphone.com] for further information | |||
[[Howto:Feature Liste in Deutsch]] | |||
[[Category:News|{{PAGENAME}}]] | [[Category:News|{{PAGENAME}}]] | ||
[[Category:Technical Data EN|{{PAGENAME}}]] |
Latest revision as of 16:52, 2 August 2023
innovaphone feature list
Applies to
This information applies to
- All innovaphone products based on V7, V8, V9 and V10
Starting with V11, this list is discontinued. Firmware-dependent functions and improvements can be found in the respective release notes:
Functions of earlier firmware versions are also included in newer versions (subject to change and discontinuation).
More information
PBX System Features
- Access to exchange via group number
- Access to separate exchange via individual number
- ACD groups
- Active Directory Replication
- Administration via uniform interface
- Alarm and error events
- Alternate route selection
- Announcement before pickup (*)
- Announcements (*)
- Authorisation groups (class of service)
- Automatic break through for call protection for preferred numbers
- Automatic call distribution (ACD)
- Automatic night switching with week clock
- Automatic route selection (ARS)
- Bootcode with minifirmware (not supported with IP3000)
- Branches (virtual central PBX)
- Bunched circuit
- Call back
- Call back also if internal call
- Call detail records (CDR)
- Calling line identification restriction (CLIR)
- Calling party identification (CLIP)
- Calling to E.164
- Calling via ENUM (H.323 and SIP)
- centralized backup /firmware/config upload
- Circle call with circle call query (#)
- Clock synchronization via IP
- Config templates for PBX User
- Configurable tones
- Configure / change / delete call diversion via web
- Conversation return to operator
- Cross connection via IP
- Cross connection via ISDN
- Different call (external, internal)
- Direct dial (with and without number reassessment)
- Door bell interface with door opener function (#)
- DTMF detection disabling
- DTMF-post dial/direct dial
- Emigration of endpoint
- Enhanced error reporting (SIP, QOS parameter, router error reporting)
- Enhanced H.323 features according to H.450.x
- Extended DTMF Object (feature set via DTMF dial)
- External communication
- Firmware upload in DRAM (not supported with IP3000)
- Floating license model
- Flexible dial plan
- General night switching
- Group call (all, circular)
- Hide Objects from LDAP
- Home office integration
- HTTP/ HTTPS allowed stations
- Incoming direct call to subscriber or group
- Interactive call acceptance (*)
- Interface for external announcement construction (#)
- Internal communication
- Internal music on hold
- Least cost routing (LCR)
- Log forwarding
- LDAP replication
- Message center (H.450.7 or DTMF)
- Message Waiting Indication (MWI)
- Messaging (SIP and H.323)
- Mixed dial method (overlap and en-block dialing)
- MS-chap V1/V2
- Multi conferencing (IP800, IP6000, IP0010, IP1060, IP3010, IP6010)
- Multi protocol (H.323, SIP)
- Multilevel admin access (detailed multilevel user rights for the PBX configuration)
- Multiple system admin (multiple admin and viewer rights possible for the whole system)
- Multistage login (multi-user)
- Music / announcement in standby from analogue resource (#)
- Music / announcement in standby from HTTP resource (*)
- Network wide features (Master/slave with virtual PBX)
- Only calling to registered subscribers (passive control)
- Overflow of subscribers and cross connection
- Overlapped sending
- PBX directory search (LDAP search via DTMF)
- Phonebook either from internal or from external source (LDAP)
- QSIG
- QSIG inter-working
- QSIG trunking (point to point and point to multipoint)
- Redundancy of the ISDN-lines
- Redundancy of the PBX
- Remote monitoring and remote diagnostics
- Remote software upgrade
- RTP Proxy
- SDP Transit (for video and other codecs)
- Short dial (individual, group, system wide)
- Silent intrusion
- SIP/H.323 Media Relay (RTP stream routing via gateway)
- SIP trunking
- SIP via TCP
- SIPS (SIP-Secure) – SIP via TCP/TLS (not supported with IP3000)
- SNMP Traps (alarm events)
- SOAP-API
- SRTP (Voice encryption) for H.323 and SIP (not supported with IP3000)
- Subscriber authorisation
- Standard protocols to the endpoint
- Subscriber groups with progressive call (parallel, circular, sequential)
- Switch between day/night with code digit from subscribers
- System time/date via timeserver (LAN or web)
- TAPI / Multi line TAPI (via several PBX’s / locations)
- Telephone number assignment
- Time based subscriber authorisation
- Twin Phones
- US standard (T1 and CAS)
- VoIP-CAPI
- Waiting queue – call busy operators / CFU disable operators
- 802.1x
- Active Directory Replication/More detail information in error situations
New in V8
- Announcing the queue position in a waiting queue
- Call completion on busy/free to ISDN
- Customized Visual Appearance (individually designable user interface)
- Dual Forking (OCS compatible)
- Dynamic PBX (more PBXs on one Device ) PBX hosting / PBX virtualization
- Kerberos based authentication and Cross Realm authentication
- Mobility (GSM integration)
- Call-waiting
- hold
- transfer
- park
- group login/logout
- mobility on/off
- setting presence status
- Off load Dialtone (external gateway)
- Off load Media Relay (external gateway)
- Off load MOH (external gateway)
- Presence
- Recording at the ISDN and analogue interfaces
- Roaming Phone Profiles
- RSTP (Rapid Spanning Tree)
- Send Message to group
- SIP error detection (alarm/event updated)
- SIP Federation
- SIP video multisite support
New in V9
- Executive/secretary enhancements
- Secretary can initiate calls with the CLIP from the executive.
- Executive can see if the secretary is joined or unjoined in the primary secretary group.
- Executive sees if a call diversion is set at the secretary.
- Breakthrough disabled call waiting at secretary.
- Reporting
- Based on internal or external Linux Application Platform
- Based on PBX CDR´s
- Predefined filter
- Reports (export as PDF, XML) from filter, combined filter, date and time
- Emergency calls priority
- Import/Export PBX user database (CSV/XML)
- Individual MOH (context sensitive based on object, node or PBX)
- IP filter for registrations with or without password
- IPv6 support (IPv6 routing, 6to4 routing and http access, telnet)
- LDAP via TLS
- MTLS
- NTP redundancy
- Partnerkeys via separate Pbx´s
- Wideband audio
- Enhanced Boolean (call forward, filter and diversion filter) based also on date
- Maximum call duration
New in V10
- Show video calls on page PBX/Calls
- Show video capability of registrations on page PBX/Registrations
- Tone type for PBX generated tones (e.g. for Mobility) configurable
- Explicit assignement of licenses to users
- Server based myPBX call lists included with myPBX licenses at no extra charge
- per user Voicemail license scheme
- Support for cloud setup
- Ability to correct calendar-driven presence information manually
- 'do-not-disturb' presence
- Support for Mobility client using data for call-control features (hold, retrieve etc.)
- configurable default visibility (presence/dialog) for group members
- Disconnect other ringing endpoints if call is rejected on one in a twin-phone configuration
- Broadcast Conference object supports chat conferences
- Offload-able media interface for voicemail (Hosting)
- Waiting Queue supports mobile operators
- Conditional Mobility/Forking (via Boolean object)
- Kerberos with AES (Windows 2008R2 compatibility)
Features IP Phones – IP110 / IP200 / IP230 / IP240 / IP240-1000 / IP241 / IP222 / IP232
- Adjustable loudness
- Adjustable ringing tones also possible, import RTTTL and midi files
- Alphanumeric phonebook
- Announcement via loudspeaker
- Automatic callback on busy and free
- Automatic redialing
- Automatic redialing to busy bunched circuit
- Blind transfer
- Call diversion to internal phone number
- Call hold / retrieve call diversion to external phone number
- Call intrusion
- Call list (outgoing, incoming, combined, not reached, not answered)
- Call park and enquiry from other subscribers
- Call prevention
- Call transfer / pickup (selective and from a group)
- Call waiting (acoustical and optical signaling of waiting calls)
- Caller identification (name/number)
- Changeover of the assigned partners
- Conference (3 way)
- Configuration of the voice recording via HTTP
- Connect to busy and free subscribers without notification
- Counter and list of missed calls
- Date and time display (automatic summer/winter time adjustment)
- Delete call back
- Delete variable call diversion
- Dialing an IP address (with and without RAS)
- Dialing with code key from an unauthorized phone
- Direct dialing (immediate, internal/external)
- Display duration of call
- Display calling number
- Emigration of subscriber/endpoint
- Fixed call diversion (unconditional, no answer (time adjustable) on busy)
- Forced announcement (priority call)
- Function keys – multitude possible – exact list can be found in the technical specification of each IP phone
- Hands free
- Headset
- Individual configuration
- Individual phonebook
- Intercom with automatic call pick up
- Interlinked and limitless multiple conference
- Manager/assistant feature
- Message waiting indication (MWI)
- Messaging
- Multi language
- Multi-protocol and multi-registration (SIP and H.323 concurrent)
- Multiple registrations with selective de-registration
- Mute (switch off the microphone)
- Name dialing
- Open listening
- Over plugging (connect call to a busy subscriber)
- Phone lock
- Preferred subscribers
- Project code
- Redialing of the last 100 dialed numbers
- Silent Intrusion
- SIP via TCP
- SIPS (Secure SIP via TCP/TLS)
- SRTP (SIP and H.323)
- Status indication of the subscriber (free/busy/call)
- Subscriber with several lines
- Subscriber with several numbers
- Transfer with consultation
- Variable call diversion
- 802.1x
Phone Menu Languages
- ger - Deutsch
- eng - English
- frn - Français
- dut - Nederlands
- ita - Italiano
- esp - Español
- swe - Svenska
- dan - Dansk
- nor - Norsk
- fin - Suomi
- cze - Cestina
- est - Eesti
- por - Português
- lat - Latviešu
- cro - Hrvatski
- pol - Polski
- rus - Русский
- slo - Slovenija
- hun - Magyar
- tha - ภาษาไทย
New in V9
- Colour display (IP241 / IP222 / IP232)
- Individual background picture (IP241 / IP222 / IP232)
- Individual audible signal for announcement calls /multicast announcements and messaging
- 802.3az (IP222 / IP232)
- Wideband audio (IP222 / IP232)
New in V10
- Russian and Slovenian languages
Features 3rd party Phones connected to analogue (POTS) port, DECT Phones IP52 / IP54 / IP55 / IP61 / IP63 / IP65
- Call completion on busy
- Call completion on free
- Call diversion to internal/external number
- Call hold/retrieve
- Call park and enquiry from other subscribers
- Call protection
- Call transfer/pickup (selective and from a group)
- Call waiting (acoustic signalling of the waiting call)
- Clip to an analogue phone
- Confirmation tone (positive and negative)
- Connect to a free and busy subscriber without notification
- Delete variable call diversion
- Dial with code key from an unauthorized phone
- Direct dial immediate (internal, external)
- Do not disturb (internal and external calls)
- Fixed call diversion; unconditional, no answer (time adjustable), on busy
- Lock phone
- Message Waiting Indication (MWI) on DECT Phones
- Preferred subscriber
- Project code
- Special tone when active feature
- Transfer with consultation
New in V10
- DECT: pass the DECT Security certification
Features innovaphone Voice mail (*)
- Languages supported: German / English / Italian / French / Dutch / Spanish / Norwegian / Danish / Polish /Swedish / Czech – additional languages on demand.
- Voicemail runs on Compact Flash (CF slot in IP800, IP305, IP302, IP2000, IP6000, IP1060, IP3010, IP6010) or on external Web Server
- Email notification (with or without attachment)
- Listen to/delete /store voice mails by means of DTMF input
- MWI (according to H.450.7)
- Personal greeting message
- Voice recording
New in V9
- Voicemail support SRTP
Features myPBX
UC client (myPBX) web-based and Windows launcher
- Languages supported: Danish / English / Estonian / Finnish / French / Italian / Latvian / Dutch / Norwegian / Polish / Portuguese / Spanish / Swedish / Czech – additional languages on demand.
- CTI (initiate call, accept call, terminate call, hold call, retrieve call, transfer call, park call, 3PTY conference)
- Manage own call diversions
- Call list
- Presence (manage own presence state)
- Buddylist (including partners presence and call status)
- Chat (multiparty chat)
- Audioconference (via innovaphone audio conference Interface)
- Videoconferece (via integration of Webex or Microsoft Livemeeting)
- Application sharing (via integration of Webex or Microsoft Livemeeting)
New in V10
- Improved usability, new look, single-window design
- Intuitive LDAP search (arbitrary search string input, results from different sources are merged)
- Possibility to display additional info from the directory in the LDAP search
- Support for LDAPS (LDAP over TLS)
- Improved instant messaging (subject, list of participants, messages are received before the chat is accepted, window can be closed and opened again without terminating the session)
- Simplified call diversion configuration (synchonized with the favourite call diversions on the phone)
- Simplified visibility settings
- Do not disturb (new presence activity, chats are rejected if DND is set)
- Pickup calls from favourites
- Unpark calls from favourites
- Unlimited length of call list (using a paging mechanism).
- Configure language in launcher
- Translated launcher user interface
- Auto appear offline, after an idle timeout that can be configured in the launcher
- MSI-Parameters for deployment of the launcher
- Launcher can dock to the left or right screen border
- Launcher can write trace files for debugging purposes and support
- Audio conferencing from the chat window has been removed
- Desktop notifications and notification sounds for calls and instant messaging. Accept and reject calls directly from the notification window. Visibility requests using desktop notifications.
- Configure mobility
- Tool that dials or starts chats in myPBX. This tool is registered in windows as an handler for tel: sip: and im: URIs.
- Display diverting info at incoming alerting calls
- Display causes at disconnecting calls
- Video calls between two myPBX Launchers is now possible (runs on Windows 7 and Windows 8, see Reference10:Concept myPBX Video for details)
- 3 party Video conference
- Webcam selection if several webcams present
- Webcam preview of the selected webcam
- Webcam menu to control settings like brightness or contrast. Adjustable at webcam preview or even during the video call
- Webcam is configured to deliver 352x288 or 320x240 resolutions and the maximun frame rate available, usually 30 fps
- H264 encoder configured to deliver an average rate of 250 kbps
- H264 video stream compatible with other vendors like LifeSize or Polycom
Microsoft Office 2010/2013 integration (introduced in V10)
allows to see the presence of a user inside a Microsoft Office 2010 application
- Presence visibility inside an Office application
- Start of a chat from inside an Office application
- Start of a call from inside an Office application
Exchange Calender Connector (introduced in V10)
Replicates Exchange Calendar information to PBX user presence (Linux Application Platform)
- Presence is set to busy during calendar appointments
- The appointment subject is provided as presence note
- later appointments the same day are indicated as presence note, if presence is 'available'
Fax Server (introduced in V10)
(Linux Application Platform)
- email-to-fax and fax-to-email gateway
- Each PBX user has an own fax number: personal fax
- Fax source formats
- plain text
- HTML
- PDF files
- all other file formats which can be converted by OpenOffice
- Cover page
- e-mail delivery/non-delivery report
- Incoming fax documents delivered as PDF
Features Operator (V8) software based
- Localized versions: German / English / Italian / Dutch – additional languages on demand
- Busylampfield (divided into groups)
- Call journal
- Call transfer (with/without consultation (blind))
- Drag&Drop or with keypad use
- Integrated help
- Monitor blind transferred calls
- Monitor of waiting queue
- Name display for incoming calls in LDAP directory
- Park/unpark
- Send messages to PBX users
- Searching within a LDAP directory
- Searching for PBX users in all PBX´s
- Set/change call forward for all PBX users
- Set/change presence status for all PBX users
- Show busy state
- Show call forward
- Show current call
- Show presence status
- State-of-the-art user interface
- Support of Master/Slave scenarios
Features Interactive Voice Response (IVR) (*)
- Call handling according to lines and/or calling number (CLI)
- Listen to the menu also from internal subscribers
- Multi level menu
- Overflow from the operator to an automatic operator
- Voice menu at extension (if no answer, busy, unconditional)
- Voice menu with information and automatic dialing
- Voice menu with predefined destinations
- Voice menu with manual dialing of the destination (DTMF)
New in V8
- Announcing the queue position in a waiting queue
- Note:
- (*) External or internal (CF-card) web server required
- (#) innovaphone IP21 required
Related Information
Reference10:Concept_Phone_Firmware_10
See the Downloads section on www.innovaphone.com for further information