Reference14r1:PBX/Objects/Fax
There are also other versions of this article available:
Reference13r1 | Reference14r1 (this version)
The innovaphone App Fax is configured with the PBX Fax object.
Configuration Options available for Fax-Objects
- URL
- Any valid URL to point to the innovaphone App Fax. With the App Fax URL argument 'mailbox' it is possible to configure a fax group app. The specified sip is used as the fax account instead of the login user.
- Header line
- A header line for outgoing faxes can be configured.
- Subscriber ID
- The subscriber id of the T.30 protocol.
- Subscriber Name
- The subscriber name used in the header line.
- Default User
- If no valid user with a fax license is found for the dialed extension number or no extension number is dialed, this user receives the incoming fax instead.
- External Resource Destination
- If the H.323 name of another PBX fax object of this PBX is configured here, the FAX interface registrations of that object is used for the FAX interface call.
- An external resource for fax group objects is mandatory.
- Modem capability
- The modem capability can be restricted if necessary. v17 can go up to 14400 bps (bit per second), v29 can go up to 9600 bps, v27ter is limited to 4800 bps. All modem speeds are allowed by default.
- Append user number
- If this is ticked, the user extension number is appended to the object number and to the subscriber id. The default is enabled.
- ECM
- If this is ticked, T.30 error correction mode is used. The default is enabled.
- Receiving with 400dpi allowed
- If this is ticked, the FAX interface is allowed to receive documents with 400dpi. The default is enabled.
- Fax License
- A fax license can be assigned to the fax object itself, if it acts as an user to receive and send a fax and as an app object together. Also, it is possible to configure the object as a group fax user.
- UC License
- An UC license can be used instead of a fax license, but without an additional value.
Apps configuration
Configures access to other apps which provide an additional service; currently, the fax app does not need any other service.
General Configuration Options
The information about general configuration options shared by all objects can be found at Reference14r1:PBX/Objects.