Reference13r2:Maintenance/Diagnostics/Counters
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference9 | Reference13r2 (this version)
Performance counters are shown once per minute (that is: one pixel in the graph represents a minute). However they are saved to flash only each full hour, so counter values calculated prior to a trap may be missing.
The counter's mean value is calculated every 10 seconds. The peak of such mean values within a minute is shown in the graph.
The counters are device-dependent and not present on each device type.
Values are displayed in the counter-specific unit. Mouse-over displays value and unit.
- CPU-R: reserved CPU time for RTP data
- CPU Average: average value of the CPU load in a one-minute cycle
- CPU Peak: maximum value which has been exceeded for 10 seconds within a one-minute cycle
- MEM: the total volatile memory (RAM) usage
- TEMP: device temperature (gateways only)
- BRIx/PRIx: the number of B-channels used on the respective ISDN interfaces. (devices with BRI/PRI interfaces only)
- ETHx: ethernet traffic on respective interface
- PINGx: response time for PING request
- CONF/SCNF: concurrent calls on respective interface (devices with CONF/SNCF interfaces only)
- CONF-R/SCNF-R: reserved CPU time for RTP data on this kind of interface (devices with CONF/SCNF interface only)
- Concurrent Calls (DECT only)