Reference13r1:PBX/Config/myApps

From innovaphone wiki
Jump to navigation Jump to search
There are also other versions of this article available: Reference13r1 (this version) | Reference13r2 | Reference13r3 | Reference14r1 | Reference14r2

All the settings on that page can be done per PBX. Note that they are not synchronized automatically across PBXes.

User Registration

Launcher Software Update

Client Settings

Applies to PBX from 13r1 SR11.

This section contains administrative settings for the myApps clients connected to the PBX.

Autostart
If turned on, myApps will be started automatically each time the user logs in on his computer. myApps for Windows only.
Show in taskbar
If turned on, myApps will be displayed in the Windows taskbar, additionally to the task tray. myApps for Windows only.
Auto appear offline
The time of inactivity after which users should be displayed as offline. (myApps for Windows only, applies for browser version also from 13r1 SR38).
Autostart video
This setting controls the default behaviour of phone apps on new phone calls. If on video telephony is done by default. If off audio-only calls are done by default. Note that during the call the user can turn video on or off at any time with both options.
Hotkey dial
The hotkey for dialling a selected phone number. myApps for Windows only.
Hotkey accept
The hotkey for accepting ringing calls. myApps for Windows only.
Hotkey reject
The hotkey for rejecting ringing calls or disconnecting active calls. myApps for Windows only.
Log flags
A hex string that represents the trace flags of the myApps launcher. See Reference13r1:Concept_myApps_platform_services#Troubleshooting.

Example trace flags:

  0x000000001 (activate App trace)
+ 0x000000008 (activate DNS trace)
+ 0x000000080 (activate HTTP client trace)
+ 0x000008000 (activate App WebSocket client trace)
+ 0x080000000 (activate AppProxy client trace)
+ 0x200000000 (activate Webserver client trace)
============
  0x280008089 <---- hide-mask
Docking
Alignment of the Docking Mode or deactivated
Show desktop notification
Enable/Disable native Windows Notifications
Audio/Video/AppSharing outside VPN
Enable/Disable ignoring ICE candiates with an interfacetype of IF_TYPE_PPP or IF_TYPE_TUNNEL
Disable Outlook search
Enable/Disable search in Outlook contacts when using native myAPPs-Windows-Client


For each setting there is a force checkmark with the following meaning:

force on
The administrative setting will be used by all clients. The user is not able to change it. Previous user settings are ignored. Note that the force checkmark has no effect, if the corresponding option is unset.
force off
The administrative setting is used as a default by all clients. The user can change it locally at any time. Previous user settings have priority.