User contributions for Afi
Jump to navigation
Jump to search
26 January 2011
- 17:1817:18, 26 January 2011 diff hist empty m Reference9:Services/HTTP/Server New page: The internal HTTP server allows web access to the device. == Configuration == {| |valign=top nowrap=true|'''Force HTTPS:''' |Allow only HTTPS sessions. HTTP requests are redirected to HT...
- 17:1717:17, 26 January 2011 diff hist empty m Reference9:Services/HTTP/Client New page: == Authenticated URLs == Some files that the device must access via HTTP (update commands, MoH, announcements, voicemail, etc.) may be located in a password-protected area. A list of URLs ...
- 17:1617:16, 26 January 2011 diff hist empty m Reference9:General/Certificates New page: == Trust list == This list contains the certificates to be accepted for TLS secured connections (e.g. HTTPS, SIPS). You can add either individual endpoint certificates or a CA certificate ...
- 17:1617:16, 26 January 2011 diff hist empty m Reference9:General/Admin →Help URL
- 17:1517:15, 26 January 2011 diff hist empty m Reference9:General/Admin New page: Basic parameters for the Administration access of the device are configured here. == Device Name == The name of the device. This name is displayed in the browser as a title. It is also a...
- 17:1517:15, 26 January 2011 diff hist empty m Reference8:Configuration/General/Admin No edit summary
- 17:1417:14, 26 January 2011 diff hist empty m Reference9:Interfaces/ETH/VLAN New page: If a network uses several '''VLAN'''s (Virtual Local Area Network), a VLAN can be specified for every Ethernet interface . This ensures that the data packets are transmitted to the specifi... current
- 17:1317:13, 26 January 2011 diff hist empty m Reference9:Interfaces/ETH/Statistics New page: The '''Statistics''' submenu provides you with an overview of all sent (tx) and received (rx) data packets: == Sent packets == {| |valign=top nowrap=true|'''tx-good:''' | The number of su...
- 17:1317:13, 26 January 2011 diff hist empty m Reference9:Interfaces/ETH/RSTP New page: The '''RSTP''' function is provided for devices connected to a redundant bridged network when a device must stay operational even if a network port or a bridge in the network fails. If RST...
- 17:0617:06, 26 January 2011 diff hist empty m Reference9:IP4/ETH/NAT New page: Use of '''NAT''' (Network Address Translation) for the relevant interface can be enabled here. It is also possible to exclude particular network addresses and masks from the translation. ... current
- 17:0417:04, 26 January 2011 diff hist empty m Reference9:Maintenance/Upload/Bootcode New page: This function can be used to load a new '''boot''' code version onto the VoIP device. New boot code versions can be obtained from a certified innovaphone dealer (http://www.innovaphone.com... current
- 17:0017:00, 26 January 2011 diff hist empty m Reference9:Interfaces/ETH/Link New page: The transmission mode of the Ethernet interface is defined here. On phones with a configurable switch the PC and the LAN port can be configured. == Configuration == The auto transmission ...
- 17:0017:00, 26 January 2011 diff hist empty m Reference:Configuration/ETH/Link No edit summary
- 16:5716:57, 26 January 2011 diff hist empty m Reference9:IP4/ETH/IP New page: == Configuration == The manual configuration settings are effective if the settings are not received within a DHCP lease. To the right of the entry fields, the settings currently used are...
- 16:5516:55, 26 January 2011 diff hist empty m Reference9:Phone/User/Directories New page: In this menu, there are three options for how the telephone can access telephone directories. '''local enable''' * A private telephone directory can be created on the device itself and us...
- 16:5416:54, 26 January 2011 diff hist empty m Reference9:IP4/ETH/DHCP-Server New page: __NOTOC__ If the DHCP server was enabled (see chapter entitled "IP4/ETH/DHCP"), it can be configured here. All settings marked with a "'''*'''" are innovaphone...
- 16:5216:52, 26 January 2011 diff hist empty m Reference9:IP4/ETH/DHCP-Leases New page: VoIP devices that have obtained an IP-Adresse from the installed DHCP server via this interface are displayed here. == Reserve IP Address == In the '''Reserve IP Address''' section, it is... current
- 16:5216:52, 26 January 2011 diff hist empty m Reference9:IP4/ETH/DHCP New page: The '''DHCP''' function can either be disabled in DHCP Disabled mode or operated in DHCP Client or in DHCP Server mode. The DHCP function of the Ethernet interface has four operating modes...
- 16:4916:49, 26 January 2011 diff hist empty m Reference9:Interfaces/ETH/802.1X New page: '''802.1X,''' Port-Based Network Control, is an IEEE standard. The standard allows LAN devices (wired network cabling!<ref>The standard refers to 802 LANs as a whole, including shared medi...
- 16:4816:48, 26 January 2011 diff hist empty m Reference9:DECT/Config/System New page: The general configuration of the DECT '''system''', as well as the allocation of the DECT system name and password are performed in this submenu. * '''Name:''' The name of the DECT system... current
- 16:4716:47, 26 January 2011 diff hist empty m Reference9:DECT/Config/Radio New page: In this menu, the DECT system can be configured as a '''DECT radio''', provided that a DECT master was already configured. * '''Disable:''' A checked check box disables the DECT radio (ce... current
- 16:4716:47, 26 January 2011 diff hist empty m Reference9:DECT/Config/Messaging New page: * '''Enable:''' If enabled, messages will be send to and received from the PBX via SIP or H.323, if disabled messages will be sent via the Polycom MSF-Module. * '''Alert pattern:''' Specif...
- 16:4516:45, 26 January 2011 diff hist empty m Reference9:DECT/Config/Master New page: It is necessary to configure the operating mode of the DECT system. A gatekeeper must also be specified here, on which the innovaphone PBX component is operated. * '''Mode:''' Active swit...
- 16:4516:45, 26 January 2011 diff hist empty m Reference9:DECT/Config/Features New page: On this page the use of feature codes for supplementary services is enabled and the codes for the different supplementary services can be configured. See Reference:Feature_Codes for a... current
- 16:4416:44, 26 January 2011 diff hist empty m Reference9:Interfaces/BRI/Statistics New page: The values marked with a '''*''' are only visible with ISDN PRI interfaces. {| |valign=top nowrap=true|'''State*''' | Specification of the state (''up'', ''down''). |- |valign=top nowrap=... current
- 16:4316:43, 26 January 2011 diff hist empty m Reference9:Interfaces/BRI/State New page: In the '''State''' submenu, you can display the state of the ISDN interfaces. The individual columns are explained in the following table. {| |valign=top nowrap=true|'''Physical State:'''... current
- 16:4316:43, 26 January 2011 diff hist empty m Reference:Configuration/BRI/Protocol No edit summary current
- 16:4316:43, 26 January 2011 diff hist empty m Reference9:Interfaces/BRI/Protocol New page: The signaling '''protocol''' for the ISDN interface is configured here. == Euro ISDN D-channel protocol: == {| |valign=top nowrap=true|'''EDSS1:''' | This type of signalling has gained wo... current
- 16:4116:41, 26 January 2011 diff hist empty m Reference9:Interfaces/BRI/Physical New page: The basic settings of the '''ISDN Basic Rate interfaces''' ('''TEL''', '''PPP''', '''BRI''') can be made here. {| |valign=top nowrap=true|'''NT Mode:''' | The interface is operated in TE ...
- 16:4116:41, 26 January 2011 diff hist empty m Reference9:Interfaces/BRI/Interop New page: Usually it should not be necessary to do any adjustments on this page. Nevertheless some ISDN implementation are not compatible to what we consider the standard. {| |valign=top nowrap=tru...
- 16:4016:40, 26 January 2011 diff hist empty m Reference9:Maintenance/Upload/Radio New page: This function can be used to load a new '''radio''' firmware version onto the VoIP device. New radio firmware versions can be obtained from a certified innovaphone dealer (http://www.innov... current
- 16:3916:39, 26 January 2011 diff hist empty m Reference9:Maintenance/Upload/Firmware New page: This function allows you to manually upload a new '''firmware''' version onto the VoIP device. This can be automated by configuring an update server as described in the chapter "[[Referenc...
- 16:3816:38, 26 January 2011 diff hist empty m Reference9:Maintenance/Upload/Directory New page: This Upload tab allows you to load the telephone directory, saved with Download Directory from your IP telephone.
- 16:3716:37, 26 January 2011 diff hist empty m Reference9:Maintenance/Upload/DRAM New page: This function allows you to upload a new '''firmware''' version into the DRAM of the VoIP device. The new firmware is started immediately after upload. The firmware loaded to DRAM is act...
- 16:3616:36, 26 January 2011 diff hist empty m Reference9:Maintenance/Upload/Config New page: This function allows you to '''load''' a saved '''configuration''' (see chapter entitled "Maintenance/Diagnostics/Config-Show") onto the ... current
- 16:3316:33, 26 January 2011 diff hist empty m Reference9:Maintenance/Reset/TFTP New page: With a '''TFTP Reset''', the VoIP device is transferred to TFTP mode. In this mode, the device can only be accessed with the GWLoad tool and thus allocated an IP-Adresse. Further informati... current
- 16:3216:32, 26 January 2011 diff hist empty m Reference9:Maintenance/Reset/Reset New page: With a '''normal Reset''', the device is immediately reset. All active calls are lost. current
- 16:3216:32, 26 January 2011 diff hist empty m Reference9:Maintenance/Reset/Idle-Reset New page: With an '''Idle Reset''', the VoIP device is reset as soon as no more active calls are being carried out. If you want to cancel the idle reset you have to switch to the General/Info page ... current
- 16:3116:31, 26 January 2011 diff hist empty m Reference9:Maintenance/Reset/Bootcode New page: With a '''Boot Reset''', the VoIP device is transferred to Boot mode. In this mode, the device executes the bootcode that contains the minifirmware. The minifirmware is a small version of ... current
- 16:3016:30, 26 January 2011 diff hist empty m Reference9:Gateway/Interfaces/VOIP New page: = Basic = == Name == Descriptive name of this gateway interface. == Disable == Disables an interface without deleting the interface configuration. == Protocol == Select the Voice over IP... current
- 16:2816:28, 26 January 2011 diff hist empty m Reference9:Gateway/Routes/Map New page: This page is used to edit a Number map. == Configuration == {| |valign=top nowrap=true|'''Description''' |This description is displayed in the last column of the routing table. It can be...
- 16:2616:26, 26 January 2011 diff hist empty m Reference9:Gateway/Interfaces/SIP New page: == SIP Registration section == The entry fields for a '''SIP registration''' are: {| |valign=top nowrap=true|'''Name''' |Descriptive name for this registration. |- |valign=top nowrap=true|...
- 16:2516:25, 26 January 2011 diff hist empty m Reference9:Gateway/Interfaces/Physical New page: On this page a physical interface (ISDN or FXS) can be configured for Gateway use. Number mapping may be configured to normalize the called and calling numbers for internal use. An interfa...
- 16:0616:06, 26 January 2011 diff hist empty m Reference9:Gateway/Interfaces/Maps New page: Number mappings performed on the interface. There are mappings for calls coming in from the interface (CGPN-In, CDPN-In) and mappings for calls going out on the interface (CGPN-Out, CDPN-O... current
- 16:0516:05, 26 January 2011 diff hist empty m Reference9:Gateway/CGPN-Maps New page: The CGPN (Calling Party Number) can be changed with mappings entered here for a call sent thru the respective route. A headmatch of the received number is performed and the matching digits...
- 16:0116:01, 26 January 2011 diff hist empty m Reference9:Phone/Ring-Tones New page: In this submenu, up to 26 ring tones in RTTTL format (Ringing Tones Text Transfer Language) can be loaded onto the IP telephone. Other formats are not supported. To load a ring tone, you e... current
- 16:0016:00, 26 January 2011 diff hist empty m Howto:How can i create RTTL ringtone files? No edit summary
- 15:5615:56, 26 January 2011 diff hist empty m Reference9:Phone/State/Registrations New page: This area shows the current state of all user registrations configured at the phone. * '''ID''': Local numeric registration ID * '''State''' ** up: User registration was successful. **... current
- 15:5415:54, 26 January 2011 diff hist empty m Reference9:Phone/Protect New page: * '''Protect configuration at phone''': Password protect changes of the administrative, phone and user configurations at the phone. * '''Hide configuration at phone''': Do not display the ...
- 15:4215:42, 26 January 2011 diff hist empty m Reference9:Phone/Preferences No edit summary