Howto12r2:Push using v12PBX and new push.innovaphone.com
Jump to navigation
Jump to search
v12 PBX can use the new Push-service, available at push.innovaphone.com instead of the old one at services.innovaphone.com. This is the desired configuration, since the new Push-service is more robust, as it has more hardware-resources available on our site.
Process to move an existing v12 PBX to the new push.innovaphone.com service
- If not already done, create a certificate for your IPVA. This is not needed for gateway-based PBXs
- Change than the Push-object URL from services.innovaphone.com to https://push.innovaphone.com/push/ws
- Check the General/Certificates section of your device and add to the Trust-List the certificate for *.innovaphone.com - it should be listed in the "Rejected certificates" section, since the first attempt to connect by HTTPS failed
Process to configure a v12 PBX with a new Push-Object for the new push.innovaphone.com service
- If not already done, create a certificate for your IPVA. This is not needed for gateway-based PBXs
- Create a new PBX object of type Push.
- The Name of the Push object is case-sensitive and will be used in the User objects to identify the push service.
- Set any password, it is not used for authentication but needed in the v12 PBX to start the websocket connection to the Push-URL
- Configure as Push-URL https://push.innovaphone.com/push/ws and click on OK
- Check the General/Certificates section of your device and add to the Trust-List the certificate for *.innovaphone.com - it should be listed in the "Rejected certificates" section, since the first attempt to connect by HTTPS failed
In both cases, the Push-object will now show as State connected and push-messages can be delivered.