Summary
The Bria Add-in for Microsoft Outlook® supports all required innovaphone features and is therefore qualified as recommended product.
The integration of the innovaphone voicemail in the softclient is possible. The message waiting indication will work only when using v7 firmware, all other voicemail features are working with v6 firmware too.
In comparison to the Bria Professional version, the Outlook Add-in does not support video calls, presence or access to the corporate directory via LDAP . However you can access your Exchange Contact List using this Add-in.
Certification Status
The tests for this product have been completed.
Testing of this product has been finalized September 15th, 2008.
Version
Firmware Version:
Bria Add-in for Microsoft Outlook® version 1.1.0.87
innovaphone Firmware:
SR2 HF7
Test Setup
Device Setup
Tested feature
|
Result
|
Register Device w/o specific configuration (requires DHCP)
|
No
|
DHCP is default
|
Yes
|
DHCP yields timeserver and time displays correctly
|
Yes
|
SNTP config has TZ string for timezone/dst autoconfig
|
Yes
|
DHCP yields correct default gateway
|
Yes
|
Device supports magic registration (e.g. provisioning)
|
Yes(not tested)
|
Fixed registrations works
|
Yes
|
Device registers w/o Extension (just by name)
|
Yes
|
Device registers by extension
|
Yes
|
Device registers with password
|
Yes
|
Device registers multiple identities
|
Yes
|
Device supports STUN protocol
|
Yes
|
Device sends NAT - keepalive messages
|
Yes
|
Device refreshes the PBX registration
|
Yes
|
Device supports SIP over TCP
|
Yes
|
Device supports SIPS (SIP over TLS)
|
Yes
|
Device supports SRTP
|
No
|
Device supports HTTPS
|
N/A
|
Device supports VAD (Voice activity detection)
|
Yes
|
Test Results
Basic Call
Tested feature
|
Result
|
call using g711a
|
Yes
|
call using g711u
|
Yes
|
call using g729
|
No
|
Overlapped sending
|
No
|
Early media channel
|
Yes
|
Device shows called id number
|
Yes
|
Device shows called id name
|
Yes
|
Device shows called id display info
|
Yes
|
Fax using T.38
|
N/A
|
CGPN can be supressed
|
No
|
Reverse Media Negotiaton
|
No
|
Device shows CDPN/CGPN on incoming call
|
Yes
|
Device shows CDPN/CGPN on outgoing call
|
Yes
|
Device shows connected number
|
Yes
|
Device shows diverting number
|
No
|
Device supports distinctive ringing
|
No
|
Device supports asymetric codec negotiation
|
Yes
|
Device supports codec renegotiation during a conversation
|
Yes
|
Device shows correct display message in case of busy CDPN
|
Yes
|
Device shows correct display message in case of not existing CDPN
|
Yes
|
Device shows correct display message in case that the call is declined
|
Yes
|
Call using video
|
Yes (only with v7 PBX firmware)
|
call using wideband codecs
|
Yes (only with v7 PBX firmware)
|
MWI from voicemail displayed correctly
|
Yes(only with v7 PBX firmware)
|
Voice Quality OK?
|
Yes
|
DTMF
Tested feature
|
Result
|
DTMF tones sent correctly
|
Yes
|
DTMF tones received correctly
|
Yes
|
Hold/Retrieve
Tested feature
|
Result
|
Device handles incoming hold (sendonly) correctly
|
Yes
|
Device can put a call on hold using correctly(inactive or sendonly)
|
Yes
|
Transfer with consultation
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
Yes
|
Yes
|
Transfer with consultation (alerting only)
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
Yes
|
Yes
|
Blind Transfer
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
Blind Transfer (alerting only)
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
Yes
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Broadcast Group & Waiting Queue
Tested feature
|
Result
|
testphone makes call to a Broadcast Group. inno1 picks up.
|
Yes
|
inno1 makes call to a Broadcast Group. testphone picks up.
|
Yes
|
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
Yes
|
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
Yes
|
inno1 makes call to a Waiting Queue. testphone picks up.
|
Yes
|
Other Features
Directory
Tested feature
|
Result
|
Device built-in directory
|
Exists
|
Yes
|
Can be dialled from
|
Yes
|
Does CLI resolution
|
Yes
|
Hands free
Tested feature
|
Result
|
Loudspeaker operation works fine
|
Yes
|
Hands free works fine
|
Yes
|
Volume adjustable during call
|
Yes
|
Keys
Tested feature
|
Result
|
Device has speed dial keys
|
No
|
Device has programmable function keys
|
No
|
Configuration
innovaphone configuration
Add a new PBX object of type "user":
3rd party product configuration
Bria Account Configuration
On the Bria softphone go to "SIP Account Settings ...".
Open "Properties" of a new account and fill like this:
You can use the Dialing plan to support international numbers, e.g. +x.T;match=1;prestrip=1;pre=000 will remove the `+´ from an international number and replace it with 000 (assuming this is your international trunk prefix from an internal line).
Bria Voicemail Configuration
To make Bria interrogate for current voicemail status, enable "Check for voice mail" and enter the voice mail number of the Bria user:
Usually the voice mail number of a PBX user is constructed by appending the phone number of the PBX user to the voice mail prefix ("4" + "217").
Related Articles