Howto:External UC

From innovaphone wiki
Revision as of 15:51, 7 December 2011 by Tac (talk | contribs) (New page: =The External UC-server logs on innovaphone UC-object with TSIP?= Yes, TSIP is the recommended transport protocol, since message bodies can get very huge. ==Any special settings required?...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The External UC-server logs on innovaphone UC-object with TSIP?

Yes, TSIP is the recommended transport protocol, since message bodies can get very huge.

Any special settings required?

As soon as the External-UC has registered, the PBX itself will send a SUBSCRIBE(presence) for a "resource-list". The destination URI can be configured at the PBX object (type External UC). The PBX then expects to get a NOTIFY(presence) containing the presence information of all users.

What is the format for sending Presence server from External UC-server to the UC-objekct?

Will innovaphone send idle/busy as presence info to External UC-server?

What is the format for sending idle/busy presence info to external presence server?

if it doesn?t send it as presence, how to monitor busy/idle? TAPI or SOAP?

innovaphone will also send presence info about phone enabled presence status and notes. But for some weeks ago I heard that this was not implemented correct yet. Is it implemented now?

What is the format for sending local enabled presence info to external presence server?

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:External_UC&oldid=23364"