Howto:Flash your own Logo on the Kirk 5020 or 5040 Handset

From innovaphone wiki
Revision as of 13:36, 29 June 2009 by Inno-gkr (talk | contribs) (New page: ==Applies To== This information applies to * IP55, IP56 Firmware Version1414 1201 PCS 07Aa (5020) or 1414 1251 PCS 07Aa (5040). <!-- Keywords:Kirk Dect Handset --> ==More Information==...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Applies To

This information applies to

  • IP55, IP56

Firmware Version1414 1201 PCS 07Aa (5020) or 1414 1251 PCS 07Aa (5040).


More Information

Configuration

in Order to be able to flash your own Logo on the Kirk 5020 or 5040 Handset you must have at least Firmware Version1414 1201 PCS 07Aa (5020) or 1414 1251 PCS 07Aa (5040)

You can find the Firmware here:

http://www.polycom.eu/support/voice/dect/dect_5020_handset.html [^] http://www.polycom.eu/support/voice/dect/dect_5040_handset.html [^]

Handset Management Tool: http://downloads.polycom.com/voice/KIRK/KIRK_5020_5040_Handset_Management_1_3_0_18_setup.zip [^]

The maximum size should not exceed 128x60 but there should be no restrictions on the color depth.

The new Q3/2009 Release Firmware will be online from the 01.07.2009 (P08Aa)



[[Category:Howto|Template:Flash your own Logo on the Kirk 5020 or 5040 Handset]]

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Flash_your_own_Logo_on_the_Kirk_5020_or_5040_Handset&oldid=14360"