Howto:Hikvision DS-KV8113 - Hikvision - 3rd Party Product: Difference between revisions
m (→Category) |
|||
| Line 13: | Line 13: | ||
==Category== | ==Category== | ||
<!-- Do not change this section and do not remove comments. Will be done by innovaphone upon document check --> | <!-- Do not change this section and do not remove comments. Will be done by innovaphone upon document check --> | ||
[[Category:Referral Product|{{PAGENAME}}]] | |||
{{Category:3rdParty_Terminal_Devices}} | |||
[[Category:3rdParty_Terminal_Devices|{{PAGENAME}}]] | |||
==Vendor== | ==Vendor== | ||
Revision as of 13:26, 4 April 2022
|
FIXME: "Incomplete article, work in progress" |
Product Name
Hikvision DS-KV8113
Certification Status
This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.
Testing of this product has been finalized April 4th, 2022.
Category
SIP hardware and software endpoints
Vendor
Description
The Hikvision DS-KV8113 is a simple Intercom Door Station, which support SIP-Integration with Video.
This is a instruction to configurate the Hikvision Video Intercom Door Station DS-KV8113
|
|
|
|
Functions
- SIP-Integration
- Relay contact to open a electrical door lock
- 2 Way Audio
- Video Support
- Supported Codec: g711u, h.264
Incoming Call
After pressing the button on the Door Station a call is startet to the configured number above (in this example 10).
Open the door
To open the Door (Relay on the Door Station) the user has to press the "#" key.
Video function
If the function "Autostart video" is enabled, the image of the Door Station is shown automatically:
Version
Product versions used for interop testing:
Innovaphone PBX: 13r2 sr9 / IPVA
Hikvision DS-KV8113: V2.2.53
Configuration
Innovation PBX
On the Innovaphone PBX a normal User-Object has to be configured:
Hikvision Door Station
SIP Settings
On the Hikvision Door Station the SIP-Settings have to be configured:
After refreshing the page, the status has to be "Registered":
Button - Number Settings
Under Intercom -> Number Settings the Endpoint which has to be called after pressing the button on the Door Station has to be configured here:
