Howto:IP Austria SIP Provider Compatibility Test

From innovaphone wiki
Revision as of 18:22, 26 March 2010 by Sga (talk | contribs) (New page: '''Innovaphone Compatibility Test Report''' == Summary == '''IP Austria''' <!--The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%2...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Innovaphone Compatibility Test Report

Summary

IP Austria


Current test state

This product is being tested right now. The test is not yet completed.


Testing Enviroment

Scenario NAT

HFO SIP Compatibility Test 5.PNG

This scenario describes a setup where the PBX and phones are in a private network. The IP800 must does not use a stun server, the SIP provider is responsible for handling the correct NAT mappings. The IP800 does not works as media relay, all RTP - streams don't pass the PBX.

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature Result
call using g711a Yes
call using g711u Yes
call using g723 No
call using g729 No
Overlapped sending No
early media channel Yes
Fax using T.38 Not tested yet
CGPN can be supressed Tests not complete
CLIP no screening Tests not complete
Long time call possible(>30 min) Yes
Voice Quality OK? Yes

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) Yes
Outbound(Innovaphone -> Provider) Tests not complete

DTMF

Tested feature Result
DTMF tones sent correctly Tests not complete
DTMF tones received correctly Yes

Hold/Retrieve

Tested feature Result
Call can be put on hold Yes
Held end hears music on hold / announcement from PBX Yes
Held end hears music on hold / announcement from provider No

Transfer with consultation

Tested feature Result
Call can be transferred Yes
Held end hears music on hold Yes
Call returns to transferring device if the third

Endpoint is not available

Yes

Transfer with consultation (alerting only)

Tested feature Result
Call can be transfered Yes
Held end hears music on hold or dialling tone Yes
Call returns to transferring device if the third

Endpoint is not available

Yes

Blind Transfer

Tested feature Result
Call can be transferred Yes
Held end hears dialling tone Yes

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group Yes
Caller can make a call to a Waiting Queue Yes
Announcement if nobody picks up the call Yes

Configuration

Firmware version

SIP - Trunk

Number Mapping

Route Settings

Media Relay

Fax