Howto:Initial Deployment of IP72
Jump to navigation
Jump to search
- Configure the WLAN access point temporarily to match IP72's default (factory) WLAN settings. Than use the web browser to access the IP72 and change to "real" production-use WLAN config
- Enter the WLAN configuration on the phone using the phone keyboard
- Connect the USB cradle to the Windows PC and use usbload.exe application to configure the WLAN phone through command line interface
Configuring the access point to match IP72's factory WLAN settings
Default IP72 WLAN config:
SSID : innovaphone_ip72 Encryption : static WEP 128 WEP-Key (ASCII) : innovaphoneag WEP-Key (Hex) : 696e6e6f766170686f6e656167 WEP-Key Index : 1
When unconfigured, the IP72 tries to connect to ssid innovaphone_ip72, with WEP-128 cipher, Wep-Key: innovaphoneag or 696e6e6f766170686f6e656167, index 1. Adjust the access point to these settings, and proceed with real production configuration via http. The IP address can be found through Menu - Administration - Information - Network. (The default user/password for http access is admin/ip72).