Howto:Netia-S.A. - SIP Provider Compatibility Test

From innovaphone wiki
Revision as of 12:53, 24 April 2012 by Can (talk | contribs) (New page: '''Netia S.A. innovaphone Compatibility Test Report''' == Summary == '''SIP Provider: Netia.S.A.''' The provider supports all required innovaphone features and is therefore qualified as...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Netia S.A. innovaphone Compatibility Test Report

Summary

SIP Provider: Netia.S.A.

The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.

That beeing said, the provider has achieved XX,X% of all possible test points (117 on total of 120 Points). For more information on the test rating, please refer to Test Description


  • Features:
    • Direct Dial In
    • Fax over IP (T.38)
    • DTMF
    • NAT Detection
    • Suppress the Number if Requested.


  • Supported Codecs by the provider
    • G711
    • G729
    • G723
    • T.38 UDP

Current test state

This product is being tested right now. The test is not yet completed.

Testing of this product has been finalized XX, 20XX.

Testing Enviroment

Scenario NAT

HFO SIP Compatibility Test 5.PNG

This scenario describes a setup where the PBX and phones are in a private network. The IP800 should use a stun server, in order to send correct SIP - messages. The IP800 works as media relay, all RTP - streams go through the PBX.

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Tested feature Result
Call using g711a X
Call using g711u X
Call using g723 X
Call using g729 X
Overlapped sending X
Early media channel X
Fax using T.38 X
CGPN can be suppressed X
CLIP no screening X
Reverse Media Negotiation X
Long time call possible X
External Transfer X
NAT Detection X
Voice Quality OK? X

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) X
Outbound(Innovaphone -> Provider) X

DTMF

Tested feature Result
DTMF tones sent correctly X
DTMF tones sent correctly via SIP-Info X
DTMF tones received correctly X

Hold/Retrieve

Tested feature Result
Call can be put on hold X
Held end hears music on hold / announcement from PBX X

Transfer with consultation

Tested feature Result
Call can be transferred X
Held end hears music on hold X

Transfer with consultation (alerting only)

Tested feature Result
Call can be transferred X
Held end hears music on hold or dialling tone X
Call returns to transferring device if the third Endpoint is not available X

Blind Transfer

Tested feature Result
Call can be transferred X
Held end hears dialling tone X

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group X
Caller can make a call to a Waiting Queue X
Announcement if nobody picks up the call X


Configuration

Firmware version

All innovaphone devices use V9hf11 as firmware.

SIP - Trunk

Netia-SA - SIP Provider Compatibility Test 1.png

Number Mapping

Netia-SA - SIP Provider Compatibility Test 2.png


We should add 0 on CDPN Out maps so users don't need to dial extra 0 to the Provider.

Route Settings

Since the Provider support Overlap sending there is no need to use "force enblock" option in the routes. We recommend the use of "Interworking QSIG/SIP" option in the routes.