Howto:SIP Interworking Interoperability HiPath 4000: Difference between revisions
Jump to navigation
Jump to search
(New page: {{Template:3rd Party Input}} SIP Interworkinmg with siemens Hipath 4000 ==Summary== ==Version== * Siemens HIpath 4000, Interface card HG 3550 * Version 5.0 * innovaphone Firmware: v8 ...) |
|||
Line 325: | Line 325: | ||
=== 3rd party product configuration === | === 3rd party product configuration === | ||
[[media:SIP_Interworking_Interoperability_HiPath_4000_HIPath_config.pdf | HIPath configuration]] | |||
== Related Articles == | == Related Articles == | ||
[[Category:Howto|{{PAGENAME}}]] | [[Category:Howto|{{PAGENAME}}]] |
Revision as of 13:47, 15 March 2010
SIP Interworkinmg with siemens Hipath 4000
Summary
Version
- Siemens HIpath 4000, Interface card HG 3550
- Version 5.0
- innovaphone Firmware: v8 HF1
Test Setup
Configuration
Tested feature | Result |
---|---|
Register Device w/o specific configuration (requires DHCP) | |
DHCP is default | |
DHCP yields timeserver and time displays correctly | |
SNTP config has TZ string for timezone/dst autoconfig | |
DHCP yields correct default gateway | |
Device supports magic registration (e.g. by serial) | |
Fixed registrations works | |
Device registers w/o Extension (just by name) | |
Device registers by extension | |
Device registers with password | |
Device registers multiple identities | |
Device supports STUN protocol | |
Device sends NAT - keepalive messages | |
Device refreshes the PBX registration | |
Device supports SIP over TCP | |
Device supports SRTP | |
Device supports SIPS (SIP over TLS) | |
Device supports HTTPS | |
Device supports VAD (Voice activity detection) | |
Supported menu languages |
Test Results
Basic Call
Tested feature | Result |
---|---|
call using g711a | Yes |
call using g711u | Not testend |
call using g729 | Yes |
Overlapped sending | No |
Early media channel | |
Device shows called id number | Yes |
Device shows called id name | No |
Device shows called id display info | No |
Fax using T.38 | Not tested |
CGPN can be supressed | |
Reverse Media Negotiaton | |
Device shows CDPN/CGPN on incoming call | Yes |
Device shows CDPN/CGPN on outgoing call | No |
Device shows connected number | |
Device shows diverting number | |
Device supports distinctive ringing | |
Device supports asymetric codec negotiation | |
Device supports codec renegotiation during a conversation | |
Device shows correct display message in case of busy CDPN | |
Device shows correct display message in case of not existing CDPN | |
Device shows correct display message in case that the call is declined | |
SOAP Call works? | |
Long Time Call (>30 min) works? | |
Voice Quality OK? | Yes |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | Yes |
DTMF tones received correctly | Yes |
Hold/Retrieve
Tested feature | Result |
---|---|
Device handles incoming hold correctly | Yes |
Device can put a call on hold using correctly(inactive or sendonly) | Yes |
Transfer with consultation
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes | Yes |
inno1 calls testphone. testphone transfers to inno2. | Yes | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes | Yes |
testphone calls inno1. testphone transfers to inno2. | Yes | Yes |
Transfer with consultation (alerting only)
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes | Yes |
inno1 calls testphone. testphone transfers to inno2. | Yes | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes | Yes |
testphone calls inno1. testphone transfers to inno2. | Yes | Yes |
Blind Transfer
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes |
inno1 calls testphone. testphone transfers to inno2. | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes |
testphone calls inno1. testphone transfers to inno2. | Yes |
Blind Transfer (alerting only)
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes |
inno1 calls testphone. testphone transfers to inno2. | |
testphone calls inno1. inno1 transfers to inno2. | Yes |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
testphone makes call to a Broadcast Group. inno1 picks up. | |
inno1 makes call to a Broadcast Group. testphone picks up. | |
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. | |
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. | |
inno1 makes call to a Waiting Queue. testphone picks up. |