|
|
| Line 16: |
Line 16: |
| ==== Configuration ==== | | ==== Configuration ==== |
|
| |
|
| On the Siemens PBX SIP native must be configured | | On the Siemens PBX SIP native must be configured, on innovaphone side a Gateway interface without registration , protocol SIP/UDP. |
| | For configuration details see below. |
|
| |
|
|
| |
|
Revision as of 13:54, 15 March 2010
 |
|
this is 3rd party content not provided by innovaphone, see history for authors. |
SIP Interworking with Siemens HIPath 4000
Summary
SIP trunking between innovaphone PBX and Siemens HIPath 4000 PBX. It is recommended to use V5 on Siemens PBX, older Versions are not stable and also fully SIP featured.
Version
- Siemens HIpath 4000, Interface card HG 3550
- Version 5.0
- innovaphone Firmware: v8 HF1
Test Setup
Configuration
On the Siemens PBX SIP native must be configured, on innovaphone side a Gateway interface without registration , protocol SIP/UDP.
For configuration details see below.
| Tested feature
|
Result
|
| Register Device w/o specific configuration (requires DHCP)
|
|
| DHCP is default
|
|
| DHCP yields timeserver and time displays correctly
|
|
| SNTP config has TZ string for timezone/dst autoconfig
|
|
| DHCP yields correct default gateway
|
|
| Device supports magic registration (e.g. by serial)
|
|
| Fixed registrations works
|
|
| Device registers w/o Extension (just by name)
|
|
| Device registers by extension
|
|
| Device registers with password
|
|
| Device registers multiple identities
|
|
| Device supports STUN protocol
|
|
| Device sends NAT - keepalive messages
|
|
| Device refreshes the PBX registration
|
|
| Device supports SIP over TCP
|
|
| Device supports SRTP
|
|
| Device supports SIPS (SIP over TLS)
|
|
| Device supports HTTPS
|
|
| Device supports VAD (Voice activity detection)
|
|
| Supported menu languages
|
|
Test Results
Basic Call
| Tested feature
|
Result
|
| call using g711a
|
Yes
|
| call using g711u
|
Not testend
|
| call using g729
|
Yes
|
| Overlapped sending
|
No
|
| Early media channel
|
|
| Device shows called id number
|
Yes
|
| Device shows called id name
|
No
|
| Device shows called id display info
|
No
|
| Fax using T.38
|
Not tested
|
| CGPN can be supressed
|
|
| Reverse Media Negotiaton
|
|
| Device shows CDPN/CGPN on incoming call
|
Yes
|
| Device shows CDPN/CGPN on outgoing call
|
No
|
| Device shows connected number
|
|
| Device shows diverting number
|
|
| Device supports distinctive ringing
|
|
| Device supports asymetric codec negotiation
|
|
| Device supports codec renegotiation during a conversation
|
|
| Device shows correct display message in case of busy CDPN
|
|
| Device shows correct display message in case of not existing CDPN
|
|
| Device shows correct display message in case that the call is declined
|
|
| SOAP Call works?
|
|
| Long Time Call (>30 min) works?
|
|
| Voice Quality OK?
|
Yes
|
DTMF
| Tested feature
|
Result
|
| DTMF tones sent correctly
|
Yes
|
| DTMF tones received correctly
|
Yes
|
Hold/Retrieve
| Tested feature
|
Result
|
| Device handles incoming hold correctly
|
Yes
|
| Device can put a call on hold using correctly(inactive or sendonly)
|
Yes
|
Transfer with consultation
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
| inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
| inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes
|
| inno1 calls testphone. testphone transfers to inno2.
|
Yes
|
Yes
|
| testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
| testphone calls inno1. testphone transfers to inno2.
|
Yes
|
Yes
|
Transfer with consultation (alerting only)
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
| inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
| inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes
|
| inno1 calls testphone. testphone transfers to inno2.
|
Yes
|
Yes
|
| testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
| testphone calls inno1. testphone transfers to inno2.
|
Yes
|
Yes
|
Blind Transfer
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
| inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
| inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
| inno1 calls testphone. testphone transfers to inno2.
|
Yes
|
| testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
| testphone calls inno1. testphone transfers to inno2.
|
Yes
|
Blind Transfer (alerting only)
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
| inno1 calls testphone. testphone transfers to inno2.
|
|
| testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Broadcast Group & Waiting Queue
| Tested feature
|
Result
|
| testphone makes call to a Broadcast Group. inno1 picks up.
|
|
| inno1 makes call to a Broadcast Group. testphone picks up.
|
|
| testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
|
| testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
|
| inno1 makes call to a Waiting Queue. testphone picks up.
|
|
Configuration
innovaphone configuration
3rd party product configuration
HIPath configuration
Related Articles
