|
|
| Line 261: |
Line 261: |
|
| |
|
| === innovaphone configuration === | | === innovaphone configuration === |
| [[image:Howto-SIP_Interworking_Interoperability_HiPath_4000_Sip_hiptah1.png]]
| |
|
| |
|
| === 3rd party product configuration === | | === 3rd party product configuration === |
Revision as of 15:57, 15 March 2010
 |
|
this is 3rd party content not provided by innovaphone, see history for authors. |
SIP Interworking with Siemens HIPath 4000
Summary
SIP trunking between innovaphone PBX and Siemens HIPath 4000 PBX. It is recommended to use V5 on Siemens PBX, older Versions are not stable and also not fully SIP featured.
Version
- Siemens HIpath 4000, Interface card HG 3500
- Version 5.0
- innovaphone Firmware: v8 HF1
Configuration
SIP trunking without registration
On the Siemens PBX SIP native must be configured, on innovaphone side configure a Gateway interface without registration , protocol SIP/UDP.
For configuration details see below.
Test Results
Basic Call
| Tested feature
|
Result
|
| call using g711a
|
Yes
|
| call using g711u
|
Yes
|
| call using g729
|
Yes
|
| Overlapped sending
|
Yes
|
| Early media channel
|
Not tested
|
| Device shows called id number
|
Yes
|
| Device shows called id name
|
One Way
|
| Device shows called id display info
|
One Way
|
| Fax using T.38
|
Yes
|
| CGPN can be supressed
|
Yes
|
| Reverse Media Negotiaton
|
Not tested
|
| Device shows CDPN/CGPN on incoming call
|
Yes
|
| Device shows CDPN/CGPN on outgoing call
|
Yes
|
| Device shows connected number
|
No
|
| Device shows diverting number
|
No
|
| Device supports distinctive ringing
|
Yes
|
| Device supports asymetric codec negotiation
|
Yes
|
| Device supports codec renegotiation during a conversation
|
No *
|
| Device shows correct display message in case of busy CDPN
|
Yes
|
| Device shows correct display message in case of not existing CDPN
|
Yes
|
| Device shows correct display message in case that the call is declined
|
Yes
|
| SOAP Call works?
|
Not tested
|
| Long Time Call (>30 min) works?
|
Not tested
|
| Voice Quality OK?
|
Yes
|
- it is recommended that you configure Media relay and a fixed codec on the innovaphone gateway, as the Siemens PBX does not support codec renegotiation.
DTMF
| Tested feature
|
Result
|
| DTMF tones sent correctly
|
Yes
|
| DTMF tones received correctly
|
Yes
|
Hold/Retrieve
| Tested feature
|
Result
|
| Device handles incoming hold correctly
|
Yes
|
| Device can put a call on hold using correctly(inactive or sendonly)
|
Yes
|
Transfer with consultation
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
| inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
| inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes
|
| inno1 calls testphone. testphone transfers to inno2.
|
Yes
|
Yes
|
| testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
| testphone calls inno1. testphone transfers to inno2.
|
Yes
|
Yes
|
Transfer with consultation (alerting only)
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to siemens.
|
Yes
|
Yes
|
| inno1 calls inno2. inno1 transfers to siemens.
|
Yes
|
Yes
|
| inno1 calls siemens. inno1 transfers to inno2.
|
Yes
|
Yes
|
| inno1 calls siemens. siemens transfers to inno2.
|
Yes
|
Yes
|
| siemens calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
| siemens calls inno1. siemens transfers to inno2.
|
Yes
|
Yes
|
Blind Transfer
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to siemens.
|
Yes
|
| inno1 calls inno2. inno1 transfers to siemens.
|
Yes
|
| inno1 calls siemens. inno1 transfers to inno2.
|
Yes
|
| inno1 calls siemens. siemens transfers to inno2.
|
Yes
|
| siemens calls inno1. inno1 transfers to inno2.
|
Yes
|
| siemens calls inno1. siemens transfers to inno2.
|
Yes
|
Blind Transfer (alerting only)
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to siemens.
|
Yes
|
| inno1 calls siemens. siemens transfers to inno2.
|
Yes
|
| siemens calls inno1. inno1 transfers to inno2.
|
Yes
|
Broadcast Group & Waiting Queue
| Tested feature
|
Result
|
| siemensmakes call to a Broadcast Group. inno1 picks up.
|
Yes
|
| inno1 makes call to a Broadcast Group. siemens picks up.
|
No
|
| siemens makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
Yes
|
| siemens makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
Yes
|
| inno1 makes call to a Waiting Queue. siemens picks up.
|
No
|
Configuration
innovaphone configuration
3rd party product configuration
HIPath configuration
Known Problems
- On Siemens side en-block dialing must be enabeld, as the Siemens can only send numbers via Sip in en-block dial.
- CCBS/CCNR is not possible.
- Calls from Siemens to innovaphone , the connected Name will not be shown up on the Siemens Endpoint.
Related Articles
