Howto:SIP Interworking Interoperability HiPath 4000

this is 3rd party content not provided by innovaphone, see history for authors.

SIP Interworkinmg with siemens Hipath 4000

Version

• Siemens HIpath 4000, Interface card HG 3550
• Version 5.0
• innovaphone Firmware: v8 HF1

Test Setup

Configuration

Tested feature	Result
Register Device w/o specific configuration (requires DHCP)
DHCP is default
DHCP yields timeserver and time displays correctly
SNTP config has TZ string for timezone/dst autoconfig
DHCP yields correct default gateway
Device supports magic registration (e.g. by serial)
Fixed registrations works
Device registers w/o Extension (just by name)
Device registers by extension
Device registers with password
Device registers multiple identities
Device supports STUN protocol
Device sends NAT - keepalive messages
Device refreshes the PBX registration
Device supports SIP over TCP
Device supports SRTP
Device supports SIPS (SIP over TLS)
Device supports HTTPS
Device supports VAD (Voice activity detection)
Supported menu languages

Test Results

Basic Call

Tested feature	Result
call using g711a	Yes
call using g711u	Not testend
call using g729	Yes
Overlapped sending	No
Early media channel
Device shows called id number	Yes
Device shows called id name	No
Device shows called id display info	No
Fax using T.38	Not tested
CGPN can be supressed
Reverse Media Negotiaton
Device shows CDPN/CGPN on incoming call	Yes
Device shows CDPN/CGPN on outgoing call	No
Device shows connected number
Device shows diverting number
Device supports distinctive ringing
Device supports asymetric codec negotiation
Device supports codec renegotiation during a conversation
Device shows correct display message in case of busy CDPN
Device shows correct display message in case of not existing CDPN
Device shows correct display message in case that the call is declined
SOAP Call works?
Long Time Call (>30 min) works?
Voice Quality OK?	Yes

DTMF

Tested feature	Result
DTMF tones sent correctly	Yes
DTMF tones received correctly	Yes

Hold/Retrieve

Tested feature	Result
Device handles incoming hold correctly	Yes
Device can put a call on hold using correctly(inactive or sendonly)	Yes

Transfer with consultation

Tested feature	Voice Ok?	MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.	Yes	Yes
inno1 calls inno2. inno1 transfers to testphone.	Yes	Yes
inno1 calls testphone. inno1 transfers to inno2.	Yes	Yes
inno1 calls testphone. testphone transfers to inno2.	Yes	Yes
testphone calls inno1. inno1 transfers to inno2.	Yes	Yes
testphone calls inno1. testphone transfers to inno2.	Yes	Yes

Transfer with consultation (alerting only)

Tested feature	Voice Ok?	MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.	Yes	Yes
inno1 calls inno2. inno1 transfers to testphone.	Yes	Yes
inno1 calls testphone. inno1 transfers to inno2.	Yes	Yes
inno1 calls testphone. testphone transfers to inno2.	Yes	Yes
testphone calls inno1. inno1 transfers to inno2.	Yes	Yes
testphone calls inno1. testphone transfers to inno2.	Yes	Yes

Blind Transfer

Tested feature	Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.	Yes
inno1 calls inno2. inno1 transfers to testphone.	Yes
inno1 calls testphone. inno1 transfers to inno2.	Yes
inno1 calls testphone. testphone transfers to inno2.	Yes
testphone calls inno1. inno1 transfers to inno2.	Yes
testphone calls inno1. testphone transfers to inno2.	Yes

Blind Transfer (alerting only)

Tested feature	Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.	Yes
inno1 calls testphone. testphone transfers to inno2.
testphone calls inno1. inno1 transfers to inno2.	Yes

Broadcast Group & Waiting Queue

Tested feature	Result
testphone makes call to a Broadcast Group. inno1 picks up.
inno1 makes call to a Broadcast Group. testphone picks up.
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
inno1 makes call to a Waiting Queue. testphone picks up.