Howto:V6 and V7 on IP21, IP200 (old), IP202 and IP400: Difference between revisions
Jump to navigation
Jump to search
(New page: ==Summary== … Running V6 PBX on IP202 ,IP400 and IP21 ==Applies To== This information applies to * IP400 * IP21 * IP202 ==More Information== …Due to memory reasons it is not poss...) |
No edit summary |
||
Line 1: | Line 1: | ||
==Summary== | ==Summary== | ||
Running V6 PBX on IP202 ,IP400 and IP21 | |||
==Applies To== | ==Applies To== | ||
Line 13: | Line 13: | ||
==More Information== | ==More Information== | ||
Due to memory reasons it is not possible to run V6 PBX on IP400, IP21 and IP202 with 8 MB Ram and 2MB Flash. | |||
Normal V6 Gateway/Gatekeeper (Protocols H.323/SIP) – aka “Relay” will still work on IP400 and IP21. | Normal V6 Gateway/Gatekeeper (Protocols H.323/SIP) – aka “Relay” will still work on IP400 and IP21. |
Revision as of 13:27, 20 April 2007
Summary
Running V6 PBX on IP202 ,IP400 and IP21
Applies To
This information applies to
- IP400
- IP21
- IP202
More Information
Due to memory reasons it is not possible to run V6 PBX on IP400, IP21 and IP202 with 8 MB Ram and 2MB Flash.
Normal V6 Gateway/Gatekeeper (Protocols H.323/SIP) – aka “Relay” will still work on IP400 and IP21.
It is not possible to run V6 Pbx on IP202 with 8MB Ram and 2 MB Flash.
With V6 you can run the IP202 with 8 MB Ram and 2 MB Flash only as Phone.
If you have an IP202 with 8MB Ram and 4 MB Flash (newer generation) you can run it with V6 as Phone,
Gateway/Gatekeeper and V6 Pbx (as it was in V5).
V6 Pbx needs minimum 4 MB Flash because of Firmware image, Vars and direcorty.
Minimum of 8Mb Ram because the V6 Pbx Code needs for itself minimum of 4 MB Ram