Howto:V6 and V7 on IP21, IP200 (old), IP202 and IP400

From innovaphone wiki
Revision as of 15:00, 20 April 2007 by Sga (talk | contribs)
Jump to navigation Jump to search

Summary

Running V6 PBX on IP202 ,IP400 and IP21

Applies To

This information applies to

  • IP400
  • IP21
  • IP202


More Information

Due to memory reasons it is not possible to run V6 PBX on IP400, IP21 and IP202 with 8 MB Ram and 2MB Flash.

Normal V6 Gateway/Gatekeeper (Protocols H.323/SIP) – aka “Relay” will still work on IP400 and IP21.

It is not possible to run V6 Pbx on IP202 with 8MB Ram and 2 MB Flash.

With V6 you can run the IP202 with 8 MB Ram and 2 MB Flash only as Phone.

If you have an IP202 with 8MB Ram and 4 MB Flash (newer generation) you can run it with V6 as Phone,

Gateway/Gatekeeper and V6 Pbx (as it was in V5).

V6 Pbx needs minimum 4 MB Flash because of Firmware image, Vars and direcorty.

Minimum of 8Mb Ram because the V6 Pbx Code needs for itself minimum of 4 MB Ram

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:V6_and_V7_on_IP21,_IP200_(old),_IP202_and_IP400&oldid=3379"