Reference8:Configuration/DECT/Master: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 16: | Line 16: | ||
'''Registering Dect Phones in a easy deployment way:''' | '''Registering Dect Phones in a easy deployment way:''' | ||
Giving a DECT phone his registration/extension, it can get registered by dialling '''*<master-id>*<extension> --> *1*100''' on the DECT Phone. | Giving a DECT phone his registration/extension, it can get registered by dialling '''*<master-id>*<extension> --> *1*100''' on the DECT Phone. | ||
The master Id is always 0 at the IP1200 (if its a singlcecell or multicell solution), and in this case the extension is 100. So the Phone is already subscribed at the IP1200 and with | The master Id is always 0 at the IP1200 (if its a singlcecell or multicell solution), and in this case the extension is 100. So the Phone is already subscribed at the IP1200 and with | ||
the dialling of the number shown above the IPEI code will be "put" into the User Object with the Number 100. | the dialling of the number shown above the IPEI code will be "put" into the User Object with the Number 100. | ||
Revision as of 15:58, 5 February 2010
It is necessary to configure the operating mode of the DECT system. A gatekeeper must also be specified here, on which the innovaphone PBX component is operated.
- Mode: Active switches on the DECT master function. In every DECT system, there must be a DECT master.
- Off switches off the DECT master function.
- Active switches on the DECT master function.
- Standby switches on the standby function for the DECT master.
- Primary Master IP Address: This field is only visible if this device has been configured as Standby-Master (Mode = Standby). The IP address of the DECT-Master has to be configured here.
- GK: The IP address of the primary gatekeeper. The device on which the innovaphone PBX component is operated.
- Alt GK: The IP address of the secondary, alternative gatekeeper.
- GK ID: The gatekeeper ID of the gatekeeper to be used.
- Prot: The protocol to be used for the communication. There is a choice between:
- H.323 (RFC 1889), which is the recommended protocol for innovaphone VoIP devices, since it implements most features.
- SIP (RFC 3261).
- STUN Server: STUN server to be used if DECT master has no public ip address and SIP server is outside the local network.
- Name for Authentication: Some SIP PBXs need authentication name different from the registration id. This enables the number being used as id and the name for authentication.
Registering Dect Phones in a easy deployment way:
Giving a DECT phone his registration/extension, it can get registered by dialling *<master-id>*<extension> --> *1*100 on the DECT Phone. The master Id is always 0 at the IP1200 (if its a singlcecell or multicell solution), and in this case the extension is 100. So the Phone is already subscribed at the IP1200 and with the dialling of the number shown above the IPEI code will be "put" into the User Object with the Number 100.