Reference:DHCP client: Difference between revisions
(New page: ==Applies To== This information applies to * IP 3000, V4 * IP 400, V4 * IP 21, V4 Build 01-4001 and later. ==More Information== ===Problem Details=== Image:Example.jpg ===System R...) |
No edit summary |
||
Line 1: | Line 1: | ||
innovaphone devices include a DHCP client which allows the IP interface to be configured from a DHCP server. | |||
In addition to that, telephone devices allow configuring a number of settings via special DHCP vendor options. | |||
Here is how the DHCP client works. | |||
[ This article has been converted from the previous "howto" document in the V5 predoc folder and is intended to replace this ] | |||
==Applies To== | ==Applies To== | ||
This information applies to | This information applies to | ||
* | * All innovaphone devices, | ||
V5.01 Build 04-5679 and V6 | |||
Build | |||
==More Information== | ==More Information== | ||
===Problem Details=== | ===Problem Details=== | ||
The innovaphone devices do support auto configuration via standard DHCP options. | |||
They additionally support some innovaphone vendor specific options to effect some VoIP specific configuration. | |||
Some of them are generic; some of them are specific to the IP200. | |||
These configurations include | |||
− H323 Gatekeeper | |||
The IP addresses of the main and alternate gatekeeper. IP200 only. | |||
− H323 Gatekeeper ID | |||
The ID of the gatekeeper taking care of the device. IP200 only. | |||
− POSIX Time zone | |||
The time zone string defining the time zone the device lives in (see the “VoIP Gateways 5.0” Manual, chapter 9.1.3 for more details about time zone settings) | |||
− Default coder | |||
The coder the device will try negotiate during media stream setup. IP200 only. | |||
− Language | |||
The user interface language of the device. IP200 only. | |||
− Location | |||
The location information (country code, area code etc.). IP200 only. | |||
− VLAN ID | |||
The VLAN ID for voice traffic | |||
− VLAN Priority | |||
The VLAN Priority for voice traffic | |||
− TOS Bits | |||
The value for the IP TOS field in the IP header of voice traffic | |||
− Enbloc dialling | |||
Overlapped sending disabled. IP200 only. | |||
− Dialtone type | |||
The type of locally generated dial tones. IP200 only. | |||
− Faststart | |||
Disable/Enable the H245 faststart procedure | |||
− H245-Tunnelling | |||
Disable/Enable H245 tunneling | |||
− Clock type | |||
Format of date and time display. IP200 only | |||
− Static routes | |||
Additional static routes | |||
− Configuration parameters for the update server | |||
URL to retrieve update commands from and poll interval | |||
− LDAP directory configuration | |||
Parameters to access an external LDAP directory. IP200 only | |||
===System Requirements=== | ===System Requirements=== | ||
To use vendor specific DHCP options, a DHCP server that supports such options is required. | |||
Most popular DHCP server implementations such as the Microsoft Windows DHCP service and the Linux dhcpd do so. | |||
===Installation=== | ===Installation=== | ||
For the DHCP server to support vendor specific options, the options must be made known to the server. | |||
Consult the accompanying documentation which comes with your DHCP server implementation how to do this. | |||
In this section, the installation of innovaphone vendor options is demonstrated using a Microsoft Windows 2000 DHCP server. | |||
First you need to create a new vendor class. | |||
Use the “Define Vendor Class…” / ”Herstellerklasse definieren” menu entry on the DHCP server’s context menu | |||
[[Image:How_to_use_the_innovaphone_DHCP_client_Dhcp1_conv.JPG]] | [[Image:How_to_use_the_innovaphone_DHCP_client_Dhcp1_conv.JPG]] | ||
Add a new vendor class as follows: | |||
[[How_to_use_the_innovaphone_DHCP_client_Dhcp2_conv.JPG.jpg]] | |||
Anzeigename / Display name innovaphone | |||
Beschreibung / Description innovaphone VoIP Options | |||
Kennung / ID (ASCII) 1.3.6.1.4.1.6666 | |||
===Configuration=== | ===Configuration=== |
Revision as of 11:36, 27 April 2007
innovaphone devices include a DHCP client which allows the IP interface to be configured from a DHCP server.
In addition to that, telephone devices allow configuring a number of settings via special DHCP vendor options.
Here is how the DHCP client works.
[ This article has been converted from the previous "howto" document in the V5 predoc folder and is intended to replace this ]
Applies To
This information applies to
- All innovaphone devices,
V5.01 Build 04-5679 and V6
More Information
Problem Details
The innovaphone devices do support auto configuration via standard DHCP options.
They additionally support some innovaphone vendor specific options to effect some VoIP specific configuration.
Some of them are generic; some of them are specific to the IP200.
These configurations include
− H323 Gatekeeper
The IP addresses of the main and alternate gatekeeper. IP200 only.
− H323 Gatekeeper ID
The ID of the gatekeeper taking care of the device. IP200 only.
− POSIX Time zone
The time zone string defining the time zone the device lives in (see the “VoIP Gateways 5.0” Manual, chapter 9.1.3 for more details about time zone settings)
− Default coder
The coder the device will try negotiate during media stream setup. IP200 only.
− Language
The user interface language of the device. IP200 only.
− Location
The location information (country code, area code etc.). IP200 only.
− VLAN ID
The VLAN ID for voice traffic
− VLAN Priority
The VLAN Priority for voice traffic
− TOS Bits
The value for the IP TOS field in the IP header of voice traffic
− Enbloc dialling
Overlapped sending disabled. IP200 only.
− Dialtone type
The type of locally generated dial tones. IP200 only.
− Faststart
Disable/Enable the H245 faststart procedure
− H245-Tunnelling
Disable/Enable H245 tunneling
− Clock type
Format of date and time display. IP200 only
− Static routes
Additional static routes
− Configuration parameters for the update server
URL to retrieve update commands from and poll interval
− LDAP directory configuration
Parameters to access an external LDAP directory. IP200 only
System Requirements
To use vendor specific DHCP options, a DHCP server that supports such options is required.
Most popular DHCP server implementations such as the Microsoft Windows DHCP service and the Linux dhcpd do so.
Installation
For the DHCP server to support vendor specific options, the options must be made known to the server.
Consult the accompanying documentation which comes with your DHCP server implementation how to do this.
In this section, the installation of innovaphone vendor options is demonstrated using a Microsoft Windows 2000 DHCP server.
First you need to create a new vendor class.
Use the “Define Vendor Class…” / ”Herstellerklasse definieren” menu entry on the DHCP server’s context menu
Add a new vendor class as follows:
How_to_use_the_innovaphone_DHCP_client_Dhcp2_conv.JPG.jpg
Anzeigename / Display name innovaphone
Beschreibung / Description innovaphone VoIP Options
Kennung / ID (ASCII) 1.3.6.1.4.1.6666