Template:SIP Profile Test CLNS no clns 302 recommended

However, call redirection using the SIP 302 Redirect header is supported by the provider. Rerouting can be enabled by setting the Reroute supported check-mark in the corresponding Trunk object configuration. Also, the Interworking check-mark must be set in the route used for calls from and to the SIP provider. We recommend to use this option as this will send proper calling line identification (CLI) for externally redirected calls. Mobility calls(i.e. calls to a mobility destination) or CFBs/CFNRs are not affected by this redirection and will not show the CLI of the original caller or be rejected by the provider. Therefore, we recommend to additionally set the Set Calling = Diverting No check-mark in the PBX Trunk object. This way, the calls will at least carry the user's own extension as calling party number (CGPN/CLI) when alerting at the mobile device/forwarding destination.