Certification Status
The tests for this product have been completed.
Testing of this product has been finalized January 16th, 2017.
Version
Firmware Version:
2.18.0.27.5
Hardware Version:
570v5
innovaphone Firmware:
11r2 sr22 IPVA[11.3648]
Device Setup
Tested feature
|
Result
|
Register Device w/o specific configuration (requires DHCP)
|
no
|
DHCP is default
|
yes
|
DHCP yields timeserver and time displays correctly
|
no
|
SNTP config has TZ string for timezone/dst autoconfig
|
no
|
DHCP yields correct default gateway
|
yes
|
Device supports magic registration (e.g. by serial)
|
no
|
Fixed registrations works
|
yes
|
Device registers w/o Extension (just by name)
|
no
|
Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|
no
|
Device registers by extension
|
yes
|
Device registers with password
|
yes
|
Device registers multiple identities
|
yes
|
2nd GK is supported (mit SIP??)
|
no
|
Changing registrations between GK1 and GK2 (mit SIP??)
|
no
|
PBX redirect (UserObject on Master/Phone at Slave registered)
|
yes
|
Physical Location (@PBX) correct?
|
yes
|
Device supports STUN protocol
|
no
|
Device sends NAT - keepalive messages
|
yes
|
Device usable in hosting scenarios?
|
yes
|
Device refreshes the PBX registration
|
yes
|
Device supports SIP over TCP
|
yes
|
Device supports SRTP
|
no
|
Device supports SIPS (SIP over TLS)
|
no
|
Device supports HTTPS
|
yes
|
Device supports VAD (Voice activity detection)
|
no
|
Device supports Auto-Answer (needed when used with CTI client)
|
yes
|
Supported menu languages
|
yes
|
Test Results
|
FIXME: Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report
|
Basic Call
Tested feature
|
Result
|
call using g711a
|
yes
|
call using g711u
|
yes
|
call using g729
|
yes
|
call using g722
|
yes
|
Overlapped sending
|
no
|
Device sets up an early media channel for incoming calls
|
no
|
Device sets up an early media channel for outgoing calls
|
no
|
Device shows called id number
|
no
|
Device shows called id name
|
no
|
Device shows called id display info
|
no
|
Fax using T.38
|
no
|
CGPN can be suppressed
|
no
|
Reverse Media Negotiation
|
yes
|
Device shows CDPN/CGPN on incoming call
|
yes
|
Device shows CDPN/CGPN on outgoing call
|
yes
|
Device shows connected number
|
no
|
Device shows diverting number
|
no
|
Device supports distinctive ringing
|
yes
|
Device supports asymetric codec negotiation
|
no
|
Device supports codec renegotiation during a conversation
|
yes
|
Device shows correct display message in case of busy CDPN
|
no
|
Device shows correct display message in case of not existing CDPN
|
no
|
Device shows correct display message in case that the call is declined
|
no
|
3party conference possible
|
no
|
Device supports display updates during call(needed for Directory Search object)
|
no
|
Long Time Call (>30 min) works?
|
yes
|
Registration redirecting works?
|
no
|
Incoming SRTP call - SRTP not enabled on DUT
|
no
|
Incoming SRTP call - SRTP enabled on DUT
|
no
|
Voice Quality OK?
|
yes
|
DTMF
Tested feature
|
Result
|
DTMF tones sent correctly
|
yes
|
DTMF tones received correctly
|
yes
|
Hold/Retrieve
Tested feature
|
Result
|
Device handles incoming hold correctly
|
yes
|
Device can put a call on hold using correctly(inactive or sendonly)
|
no
|
Transfer with consultation
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
yes
|
yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
yes
|
yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
yes
|
yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
yes
|
yes
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
N/A
|
Transfer with consultation (alerting only)
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
N/A
|
N/A
|
inno1 calls inno2. inno1 transfers to testphone.
|
N/A
|
N/A
|
inno1 calls testphone. inno1 transfers to inno2.
|
N/A
|
N/A
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
N/A
|
N/A
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
N/A
|
Blind Transfer
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
yes
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
Blind Transfer (alerting only)
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
N/A
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
N/A
|
Broadcast Group & Waiting Queue
Tested feature
|
Result
|
testphone makes call to a Broadcast Group. inno1 picks up.
|
yes
|
inno1 makes call to a Broadcast Group. testphone picks up.
|
yes
|
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
yes
|
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
yes
|
inno1 makes call to a Waiting Queue. testphone picks up.
|
yes
|
DTMF Features
Tested feature
|
Result
|
CFU Activate/Deactivate
|
no
|
CFB Activate/Deactivate
|
no
|
CFNR Activate/Deactivate
|
no
|
Pickup Group
|
no
|
Pickup Directed
|
no
|
Park/Unpark
|
no
|
Park To/Unpark From
|
no
|
Call Completion Busy
|
no
|
Call Completion Cancel
|
no
|
Join Group/Leave Group
|
no
|
Join All Groups/Leave All Groups
|
no
|
Enable mobility/Disable mobility
|
no
|
Enable mobility cw/Disable mobility cw
|
no
|
Set presence
|
no
|
Other Features
Directory
Tested feature
|
Result
|
Device built-in directory
|
yes
|
Exists
|
yes
|
Can be dialled from
|
yes
|
Does CLI resolution
|
no
|
display update if directory object is used?
|
yes
|
Tested feature
|
Result
|
External LDAP Server supported
|
no
|
Can be dialled from
|
no
|
Does CLI resolution
|
no
|
display update if directory object is used?
|
no
|
Keys
Tested feature
|
Result
|
Device has speed dial keys
|
yes
|
Device has programmable function keys
|
yes
|
Device has partner keys
|
yes
|
CTI Features (with SOAP / TAPI / myPBX)
Tested feature
|
Result
|
User Call - outgoing call
|
no
|
User Connect - Answer incoming call
|
no
|
User Reject - Reject alerting call
|
no
|
User Disconnect - Disconnect active call
|
no
|
User Hold - Put connected call on hold
|
no
|
User Hold Retrieve - Retrieve call on hold
|
no
|
User Transfer - Transfer with Consult
|
no
|
User Transfer - Transfer with Consult (Alerting only)
|
no
|
User Transfer - Blind Transfer
|
no
|
3PTY - Make 3rd Party Call
|
no
|
Connected Number Update on Display
|
no
|
UC Features
Tested feature
|
Result
|
Video calls possible?
|
yes
|
Video conference possible? (max. amount of participants)
|
no
|
Video Codecs
|
yes
|
enable/disable video during call
|
yes
|
Set own presence possible?
|
no
|
See presence of others possible?
|
no
|
chat with mypbx client possible?
|
no
|
chat with same vendor client possible?
|
no
|
send IM - messages to phones possible?
|
no
|
Configuration
3rd party product configuration