V12 Gateway Firmware Technical Data EN

From innovaphone wiki
Revision as of 09:24, 9 December 2015 by Vsc (talk | contribs) (New page: {{Template:Disclaimer}} ==Datasheet== ===innovaphone Firmware Version 12=== General features valid for innovaphone gateways operated with firmware V12 ===VoIP protocols=== {{Template:Lei...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 2023 innovaphone® AG

Datasheet

innovaphone Firmware Version 12

General features valid for innovaphone gateways operated with firmware V12

VoIP protocols

H.323 Version 5, including proprietary extensions

H.323 over UDP, TCP, TLS

SIP Version 2, conform RFC 3261

SIP over UDP, TCP, TLS

RTP, SRTP (SDES, DTLS), RTCP, ICE

T.38 Fax (supported rates 9.6k and 14.4k)
incl. fallback to G.711 (valid for gateways with DSPs)

Linux Application Platform

applicable for gateway models xx10 and xx11 (except of 1130) or as virtual solution

for additional Unified Communications applications such as faxserver, reporting and Microsoft(R) Exchange calendar connectivity

Requirements for operation in a virtual machine:

  • VMWare Player/VMWare Workstation
  • 1vCPU (at least 800 MHz - depending on the operation/load of other tasks)
  • 512 MB RAM
  • 8GB Disk (operation in IPxx10 requires a qualified CF-card, resp. in IPxx11/11xx a SSD)

Network

PPPoE, manual or automatic connection after boot

PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE

NAT, H.323-NAT, STUN, TURN over UDP/TCP

RSTP, EAP-TLS/EAP-MD5 acc. to IEEE 802.1X

VLAN-ID acc. to IEEE 802.1Q

DHCP support

LLDP support for VLAN configuration

NTP support

Reverse Proxy, various SBC-functionalities (IPxx11/11xx recommended)

Administration

Password protected administration via web-browser, Kerberos server

Log and trace files, Display of interface and connection status, Ping – connection test for Internet Protocol, Sending SNMP V1 Traps

Save and reload config files, Boot code and firmware update via HTML upload, Automatic update via update server

Datenblatt

innovaphone Firmware Version 12

allgemeingültige Leistungsmerkmale für innovaphone Gateways mit Firmware V12

VoIP-Protokolle

H.323 Version 5, inklusive proprietärer Erweiterungen

H.323 über UDP, TCP, TLS

SIP Version 2, conform RFC 3261

SIP über UDP, TCP, TLS

RTP, SRTP (SDES, DTLS), RTCP, ICE

T.38 Fax (unterstützte Raten 9.6k und 14.4k) mit Rückfallmöglichkeit auf G.711

Linux Application Platform

gültig für Gateway Modelle xx10 und xx11 (ausser 1130) oder als virtuelle Lösung

für Zusatzapplikationen wie Reporting, Faxserver und Microsoft(R) Exchange-Kalenderanbindung

Anforderungen bei Betrieb in einer virtuellen Lösung:

  • VMWare Player/VMWare Workstation
  • 1vCPU (mind. 800 MHz - abhängig von weiteren Prozessen/Applikationen auf dem selben System)
  • 512 MB RAM
  • 8GB Disk (bei Betrieb in IPxx10 wird eine entsprechend große CF-Karte benötigt, in IPxx11/11xx eine SSD)

Netzwerk

PPPoE-Protokoll, manueller / automatischer Verbindungsaufbau nach Start

PPTP bis zu 32 Tunnel parallel, Verschlüsselung mit MPPE

NAT, H.323-NAT, STUN, TURN

RSTP, EAP-TLS/EAP-MD5 gem. IEEE 802.1x

VLAN-ID gem. IEEE 802.1q

DHCP Unterstützung

LLDP Unterstützung zur VLAN Konfiguration

NTP-Support

Reverse Proxy, diverse SBC-Funktionalitäten (IPxx11/11xx empfohlen)

Administration

Passwortgeschützter Zugriff über Web-Browser, Kerberos-Server

Log- und Trace-Dateien, Statusanzeigen

Ping – Verbindungstest, Senden von SNMP-Traps V1

Speichern und Einlesen der Konfiguration, Aktualisierung Boot-Code und Firmware über HTML-Upload, Automatische Aktualisierung über Update-Server